Bellow Seal in Palghar

• MOQ : 1 Piece
• Pressure : 18 Bars (max))
• Applications : Generally used in Water Pumps, Mixers, Compressors & Blenders.
• Velocity : Up to 20 m/sec
• Shaft Dia : 0.625 to 2.000 Inch
• Temperature : -20 to +180°C
• Country of Origin : India

Rubber Bellow Seal SRB 30 Series are single coil spring rubber bellow seals used in Petrochemicals, Food Processing, Pulp & Paper and other demanding Applications. These seals are mainly used in compressors. Seals have self aligning feature which compensates abnormal shaft end play and run out, which lead more...

• Temperature : -20 to +350°C
• Shaft Dia : 1.000 to 4.000 Inch
• Applications : Chemicals, Petrochemicals, Petroleum Refineries.
• Pressure : 14 Bars (max))
• Velocity : Up to 20 m/sec
• Country of Origin : India

Metal Bellow Seal MB 630 Series is welded metal bellow seals used in process pumps for high temperature and moderate pressure applications in chemical, petrochemical & refineries. These bellow seals are constructed by welding a series of diaphragms together at the edges. The bellow unit eliminates the nee more...

• Pressure : 6 Bars (max)
• Shaft Dia : 10 to 100 mm
• Velocity : Up to 20 m/sec
• Country of Origin : India
• Applications : Generally used in Water Pumps, Submersible & Sewage Pumps.
• Temperature : -20 to +160°C

Rubber Bellow Seal SRB 20 Series is a single coil spring rubber bellow seal used for Water and Oil Containing Soft Slurry Applications. This seal is mainly used in waste water treatment plants for sewage application. Seal has self aligning feature which compensates abnormal shaft end play and run out, which l more...

• MOQ : 100 Piece
• Size : Customised
• Usage : Oil Industry
• Finishing : Polished
• Supply Type : Manufacturer
• Automation Grade : Automatic
• Type : Industrial Seals
• Specialities : Unbreakable,Heat Resistant,Good Quality,Fine Finish,Easy To Install
• Material : Cast Iron
• Bearing : SKF

40 Series (Metal Bellow Mechanical Seal) 4202, 4202 CR - Balanced Metal Bellow Seal Super Style 4252, 4252 CR - Balanced Metal Bellow Seal Super Style 4352, 4352 CR - Balanced Metal Bellow Seal Super Style 4452 - Balanced Metal Bellow Seal Super Style more...

• Material : Cast Iron
• Size : Customised
• Supply Type : Manufacturer
• Usage : Industrial
• Specialities : Unbreakable, Heat Resistant, Good Quality, Fine Finish, Easy To Install
• Sealing Type : Mechanical
• Finishing : Polished
• Automation Grade : Automatic
• Shape : Round
• Type : Industrial Seals

60 Series (Multi Spring Teflon Bellow Mechanical Seal) 6142 - Teflon Bellow Seal Super Style 6242 - Teflon Bellow Seal Super Style 6342 - Teflon Bellow Seal Super Style   more...

• Shaft Speed in RPM : 3520
• Specialities : Heat Resistant
• Working Pressure : 10
• Overall Dimension (LXBXH) : 390X170X360mm
• Material Grade : S316
• Model Number : 6142
• Inner Diameter : 40mm
• Material : Polyurethane
• Supply Type : Manufacturer
• Warranty : 2 Year

We offer Teflon Bellow Seal. The most versatile range of seals for handling acids. It is unrivalled in its ability to withstand corrosive fluids and is highly resistant to oxidising and reducing agents. That's because it is made out of chemically inert materials like PTFE, GFT, Ceramic, Carbon, Silicon Carbid more...

• Thickness : 40-50mm
• Finishing : Polished
• Supply Type : Manufacturer
• Packaging Type : Carton Box
• Working Pressure : 25Bar
• Warranty : 1 Year
• Sealing Type : Mechanical
• Chemical Resistance : Yes
• Country of Origin : India
• Color : Silver

Applications: Sludge & syrup pump Slurry pump Chemical petrochemical & refinery Pulp & paper Boiler feed water pumps Oil pipeline pumps Clinker grinders Seal characteristics: Balanced Single acting Independent of direction of rotation Sturdy drive mechanism Stationary multiple spring more...

• Suitable For : High Temperature
• Shaft Speed in RPM : 4000RPM
• Warranty : 1 Year
• Supply Type : Manufacturer
• Material Grade : S316
• Temperature : -20°c to 400°c
• Sealing Type : Mechanical
• Finishing : Polished
• Condition : New
• Thickness : 40-50mm

Series : MB61 & MB66 Metal Bellow Seals Manufacturer, Metal Bellow Seals Supplier   Metal Bellow Seals - specialist of metal bellow seals manufacturer and supplier in India. Metal bellow seals are best for high temperature applications.   Being one of the top most manufacturer, supplier and expo more...

• Pump RPM [Speed] : 2900rpm /1440rpm
• Condition : New
• Size (Inches) : 2Inch
• Supply Type : Manufacturer
• Pressure (Bar) : 10 Bar
• Temperature Range Deg C : 30-120
• Working Pressure : 10Bar
• Inner Diameter : 50mm
• Packaging Type : Carton Box
• Specialities : Good Quality, Easy To Install

Face Materials : Rotary : GFT, PTFE, Silicon Carbide, Carbon Stationary : Ceramic Metal Parts : SS 316, SS 304, Monel, Alloy-20 Springs : SS316, Hast-C, Alloy-20 & Spring Steel or SS 304 Covered by Teflon Tube Secondary Seal : PTFE Bellow, Gasket   Shaft Diameter : 10 mm to 100 mm (0.5" to 4.0") Pres more...

• MOQ : 5 Piece
• Finishing : Polished
• Supply Type : Manufacturer
• Shape : Round
• Material : Mild Steel
• Type : Industrial Seals
• Pressure : 25 Bar
• Temperature : -40˚C To 220˚C
• Speed : 20 M/s

METAL BELLOW SEALS Metal bellow Seal is inherently balanced mechanical seal. These seals are independent of direction of rotation. The unique feature of this type of seal is that there are no dynamic 'O' rings and therefore it will never hang-up or damage the shaft and sleeve. It can handle corrosive as well more...

• Type : Industrial Seals
• Temperature : -45˚C to 120˚C
• Pressure : 6 bar
• Finishing : Polished
• Supply Type : Manufacturer
• Material : Mild Steel
• Speed : 20 m/s
• Color : Silver

TEFLON BELLOW SEALS Teflon Bellow seals are designed to handle highly corrosive liquids. It is outside mounted with a simple installation procedure and hence cost effective. Sealing faces are replaceable and are driven by internal lugs on bellows. Faces can be easily removed & replaced.   Industrial more...

• Pressure : 6 bar
• Color : Silver
• Type : Industrial Seals
• Supply Type : Manufacturer
• Shape : Round
• Speed : 10 m/s
• Finishing : Polished

RUBBER BELLOW SEALS Rubber Bellow Seal has a self aligning feature which compensates abnormal shaft end play and run-out, which increases seal life. Elastomeric below protects the shaft/sleeve from fretting. The compact design eliminates the requirement of extra radial & axial space for its installation. more...

• MOQ : 10 Piece
• Feature : Durable, Easy To Use,For unstepped shafts, Single seal, Balanced, Independent of direction of rotation, Metal bellows rotatingx
• Operating Range : Shaft diameter: d1 = 16 ... 100 mm (0.63" ... 4"), Externally pressurized : p1 = ... 25 bar (363 PS
• Material : Cold Rolled Steel
• Advantages : For extreme temperature ranges, No dynamically loaded O-Ring, Self cleaning effect, Short installati
• Type : PS250N Metal Bellows Seals
• Pressure : High Pressure, Low Pressure, Medium Pressure
• Country of Origin : India
• Thickness : 1-5mm

Materials Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q12)  Seat: Silicon carbide (Q1)  Bellows: Inconel® 718 hardened (M6), Hastelloy® C-276 (M5)  Metal parts: CrNiMo steel (G), Duplex (G1), Hastelloy® C-4 (M)   Recommended Applications  Process Industry  Oil & Gas Industry more...

• Material : Cold Rolled Steel
• Shape : Round
• Operating Range : Shaft diameter: d1 = 16 ... 60 mm (0.63" ... 2,36"), Pressure: p1 = 18 bar (261 PSI), vacuum ... 0.
• Country of Origin : India
• Type : Industrial Seals
• Advantages : 100 % compatible with MG13, Small outer diameter of bellows support (dbmin) enables direct retaining ring support, or smaller spacer rings, Optimal alignment characteristic through self-cleaning of disk/shaft, Improved centering across entire pressu
• Specialities : For plain shafts, Single and dual seal, Elastomer bellows rotating, Balanced, Independent of directi
• Finishing : Polished

Materials  Seal face: Carbon graphite antimony impregnated (A), Carbon graphite   resin impregnated (B), Silicon carbide (eSiC-Q7, Q1)  Seat: Silicon carbide (eSic-Q7, Q1)  Elastomer: NBR (P), EPDM (E), FKM (V), HNBR (X4)  Metal parts: CrNiMo steel (G), Hastelloy® (M)     Recommended Applications  F more...

• Material : Cold Rolled Steel
• Advantages : For high or low temperature applications
• Operating Range : Pressure (single ply bellows): p = vacuum ... 20 bar ( ... 290 PSI), Pressure (two ply bellows): p =
• Feature : Single seal, Balanced, Independent of direction of rotation, Stationary metal bellows
• Shape : Round
• Country of Origin : India
• Pressure : High Pressure, Low Pressure, Medium Pressure

Recommended Applications  Refining Technology  Power Plant Technology  Chemical Industry  High and low temperature hydrocarbon services  Residual oil  Gas oil  Low temperature ethylene  Pumps  Special rotating equipment   Materials  Seal face: High density carbon graphite  Seat: Silicon carbide (Q more...

• MOQ : 1 Piece
• Country of Origin : India
• Pressure : 10 Bars(max)
• Velocity : Up to 20 m/sec / 3000 r.p.m.
• Shaft Diameter : 12 To 75 Mm
• MOC : SS 316 / SS 304
• Seal Ring Face : Carbon, SiC & T.C
• Seat Face : Ceramic, SiC & T.C
• Usage : Water Pumps, Submersible pumps & Hot Oil Pumps
• Supply Type : Manufacturer

more...

• Seat Face : Ceramic, SiC & T.C
• Usage : Water Pumps, Submersible & Sewage Pumps
• Country of Origin : India
• Temperature : -20 to +100°C
• MOC : SS 316/ SS 304
• Type : Inside Mounted,
• Shaft Diameter : 10 To 100 Mm
• Seal Ring Face : Carbon, SiC & T.C
• Pressure : 13 Bars(max)
• Supply Type : Manufacturer

more...

• Application : chemicals, Petrochemicals & Petroleum Refineries, Hot Oil
• MOC: : SS 316/SS 304, Hast-c
• Velocity : Up to 20 m/sec/3000 r.p.m.
• Country of Origin : India
• Seat Face : SiC &T.C
• Pressure: : 18 Bars(max)
• Elastomer : Viton, PTFE, FEP, EPDM, FFKM
• Shaft Diameter : 19 to 100 mm
• Temperature : -20 to +350°C
• Supply Type : Manufacturer

Inside Mounted, Balanced, Metal Bellow with Graphite Packing) for High Temperature more...

• MOQ : 1 Set
• Inner Diameter : 1.125 inch
• Shape : Round
• Specialities : Unbreakable, Good Quality, Fine Finish
• Material : Stainless Steel & Plastic
• Usage : Industrial
• Material Grade : SS304
• Country of Origin : India

more...

• Finishing : Coated
• Shape : Round
• Type : Industrial Seals
• Sealing Type : Mechanical
• Country of Origin : India
• Color : White

more...

• Color : Silver
• Material : Stainless Steel
• Country of Origin : India
• Specialities : Unbreakable, Good Quality, Fine Finish
• Shape : Round
• Finishing : Coated

more...

• MOQ : 1 Piece
• Size (Inches) : 19mm-75mm
• Material : Rubber
• Type : Rubber Bellow Seal
• Usage : WATER PUMPS
• Supply Type : Manufacturer
• Condition : New
• Brand Name : Sam Seals India

Type SSI-7 are most commonly used rubber bellow seal, Due to its compact design it can be easily mounted. TYPE LS 20 has a unique rubber bellow secondary seal, which provides a high degree of axial flexibility to compensate for lack of concentric of the shaft & misalignment & wear due to thrust moveme more...

• Finishing : Coated
• Supply Type : Manufacturer

Types SSI-11RF   shaft seals feature chemically inert materials in all areas and on all surfaces in contact with the liquid being sealed. Metallic components, springs and clamp ring are located outside the pump seal chamber, isolated from the process liquid. For use with extremely corrosive chemicals, includ more...

• Temperature : -20 to 80°C
• Seal Faces : GFT/Sic./Carbon vs Ceramic/Sic.
• Shaft Dia. : 18 to 100mm
• Secondary Seals : PTFE
• Pressure : Up to 5 Bars
• Supply Type : Manufacturer
• Metal Components : SS-316/Hast-C

TYPE SSI-11CB : are PTFE Bellow seals designed to handle highly corrosive liquids. These seals are outside mounted with simple installation procedure and hence cost effective for corrosive media sealing. Type SSI11CB designated as Fixed & replaceable bellow face respectively. For replaceable version more...

• MOQ : 50 Piece
• Packaging Type : Carton Box
• Sealing Type : Mechanical
• Supply Type : Manufacturer
• Material : Rubber
• Product Code : LB RS2
• Finishing : Polished
• Warranty : 1 Year
• Usage : Industrial Use
• Specialities : Unbreakable, Good Quality

more...

• Product Code : TB14
• Warranty : 1 Year
• Packaging Type : Carton Box
• Supply Type : Manufacturer
• Country of Origin : India
• Material : PTFE
• Usage : Industrial Use
• Finishing : Polished
• Sealing Type : Mechanical

Providing an enormous scope of exhaustive items has made us a preferred choice in this field. From a similar angle, we are offering great quality TB-14 PTFE Bellow Seal which is introduced with the intention of halting the further working of the machine. The bellow seal is made according to the normal arrange more...

• Finishing : Polished
• Country of Origin : India
• Material : Rubber
• Warranty : 1 Year
• Specialities : Unbreakable, Good Quality
• Supply Type : Manufacturer
• Sealing Type : Mechanical
• Packaging Type : Carton Box

The offered Rubber Bellow Mechanical Seal is manufactured with the use of premium quality raw materials and cutting-edge technology. Available in different diameters, this seal is used for the prevention of fluid loss in hydraulic systems and machines. Our offered seal is examined on different measures of qua more...