Our Products
Roll Forming & Bending Machines
2 Products availableClamps
2 Products availableChillers
2 Products availableSpying & Intelligence Devices
2 Products availableTemperature Controller
1 Products availableConveyors
1 Products availableContinuous Mixers
1 Products availableDosing System
1 Products availableFigure & Vehicle Toys
1 Products availableOur Complete range of products are Cabinet Dryer, dehumidifying dryer, Mold Dehumidifying Dryer, European Type Hopper Dryer and Hopper Dryer.
The high-efficiency insulation material between internal layer and out layer to reduce the heat loss. Hot air down-blowing design ensures the even temperature in the hopper. The hopper is made from high quality of stainless steel to ensure that the materials won't be polluted. The out layer is made of special material which is fashionable and attractive.The 24H timer can achieve device startup in advance to improve work efficiency.
Technical Specifications
Model | Heater Power (kw) |
Blower Power (kw) |
Temperature Range | Numbers of tray | Capacity(kg) | Dimensions (L*W*H) |
Weight (kg) |
---|---|---|---|---|---|---|---|
SD-5 | 6 | 0.75 | 200 | 5 | 45 | 85*70*110 | 154 |
SD-9 | 6 | 0.75 | 200 | 9 | 80 | 85*70*145 | 190 |
Dehumidifying Dryer can provide the dry wind with the low dew point of -50oC and satisfy many requsets of plastic production. The machine is equipped with the alarm function for abnormal wheel turning. The filter is installed on regeneration and drying pipelines to honeycomb and the clean of the dry wind.The machine is controlled by PID micro computer to make the accurate temperature. The machine is equipped with the converse alarm function. The machine is equipped with highly efficient condenser to ensure the lower temperature of the return air.
Technical Specifications
Material | Drying Temperature (oC) |
Drying Time(hr) |
Moisture Content(%) |
Drying Capacities (Kg/Hr) | |||||||||||
80 | 100 | 120 | 150 | 200 | 300 | 400 | 500 | 700 | 1000 | 1500 | 2000 | ||||
ABS | 80 | 43134 | 0.2-0.6 | 25 | 50 | 75 | 90 | 120 | 180 | 240 | 300 | 400 | 410 | 700 | 1045 |
LCP | 150 | 43134 | 0.04 | 20 | 27 | 38 | 55 | 80 | 140 | 165 | 220 | 270 | 320 | 510 | 790 |
POM | 100 | 2 | 0.08-0.25 | 25 | 50 | 75 | 90 | 120 | 180 | 240 | 300 | 400 | 620 | 1010 | 1580 |
PMMA | 80 | 3 | 0.1-0.7 | 20 | 40 | 60 | 75 | 100 | 150 | 200 | 250 | 350 | 450 | 767 | 1150 |
IONOMER | 90 | 43163 | 1.4 | 15 | 30 | 40 | 50 | 70 | 105 | 130 | 150 | 220 | 270 | 432 | 650 |
PA6/6.6/6.10 | 75 | 43196 | 38354 | 20 | 40 | 60 | 70 | 90 | 135 | 180 | 240 | 360 | 230 | 380 | 580 |
PA11 | 75 | 43196 | 1.0-1.5 | 17.5 | 35 | 50 | 60 | 80 | 120 | 160 | 200 | 280 | 260 | 470 | 685 |
PA12 | 75 | 43195 | 1.0-1.5 | 17.5 | 35 | 50 | 60 | 80 | 120 | 160 | 200 | 280 | 270 | 465 | 685 |
PC | 120 | 43134 | 0.3-0.36 | 27.5 | 55 | 80 | 100 | 130 | 185 | 260 | 320 | 420 | 505 | 810 | 1200 |
PU | 90 | 43134 | 0.2-0.9 | 20 | 40 | 60 | 75 | 100 | 150 | 200 | 250 | 350 | 440 | 740 | 1130 |
PBT | 130 | 43163 | 0.08-0.34 | 25 | 50 | 75 | 90 | 120 | 180 | 240 | 300 | 420 | 380 | 620 | 940 |
PE | 90 | 1 | 0.01 | 32.5 | 65 | 100 | 120 | 160 | 240 | 320 | 400 | 650 | 1280 | 2107 | 3110 |
PEI | 150 | 43163 | 0.25 | 18 | 27 | 41 | 53 | 80 | 135 | 165 | 200 | 250 | 320 | 550 | 820 |
PET | 160 | 43195 | 0.08 | 15 | 30 | 40 | 50 | 70 | 100 | 130 | 160 | 220 | 300 | 490 | 750 |
PETG | 70 | 43163 | 0.5 | 19 | 27 | 39 | 53 | 80 | 135 | 162 | 210 | 265 | 310 | 520 | 790 |
PEN | 170 | 5 | 0.1 | 21 | 30 | 39 | 60 | 90 | 150 | 175 | 250 | 310 | 340 | 580 | 900 |
PES | 150 | 4 | 0.8 | 21 | 30 | 40 | 60 | 90 | 150 | 175 | 245 | 300 | 350 | 600 | 900 |
PPO | 110 | 43102 | 0.13 | 27.5 | 55 | 80 | 95 | 130 | 190 | 260 | 330 | 470 | 500 | 880 | 1310 |
PPS | 150 | 43163 | 0.1 | 19 | 44 | 38 | 53 | 80 | 133 | 155 | 200 | 250 | 310 | 550 | 780 |
PP | 120 | 2 | 0.32 | 30 | 60 | 90 | 110 | 150 | 220 | 300 | 380 | 540 | 600 | 1010 | 1580 |
PS(GP) | 80 | 1 | 0.01 | 42.5 | 85 | 130 | 160 | 240 | 360 | 480 | 600 | 840 | 1050 | 1700 | 2600 |
PSU | 120 | 43163 | 0.22 | 30 | 60 | 85 | 105 | 140 | 210 | 280 | 350 | 500 | 350 | 580 | 840 |
PVC | 70 | 43102 | 0.1-0.4 | 27.5 | 55 | 80 | 95 | 130 | 190 | 260 | 350 | 500 | 530 | 870 | 1310 |
SAN(AS) | 80 | 43102 | 0.1-0.3 | 27.5 | 55 | 80 | 95 | 130 | 190 | 260 | 350 | 500 | 540 | 870 | 1310 |
TPE | 110 | 3 | 0.1 | 27.5 | 37 | 50 | 85 | 125 | 202 | 245 | 331 | 413 | 476 | 812 | 1200 |
Model | Dry blower (m3/hr) |
Power of dry blower (kw) |
Power of rey. blower(kw) |
Power of rey.heater (kw) |
Pipe diameter (inch) |
Dimensions (cm) |
Weight (kg) |
---|---|---|---|---|---|---|---|
SLD-80 | 80 | 0.55 | 0.37 | 4.2 | 2 | 750*600*1230 | 155 |
SLD-100 | 100 | 0.75 | 0.37 | 5 | 2 | 750*600*1230 | 165 |
SLD-120 | 120 | 1.1 | 0.37 | 5 | 2 | 900*650*1330 | 202 |
SLD-150 | 150 | 1.5 | 0.55 | 7 | 2.5 | 900*650*1330 | 208 |
SLD-200 | 200 | 2.2 | 0.55 | 7 | 2.5 | 900*650*1330 | 220 |
SLD-300 | 300 | 3 | 0.75 | 9 | 3.5 | 1050*800*1550 | 278 |
SLD-400 | 100 | 4 | 0.75 | 9 | 3.5 | 1050*800*1550 | 300 |
SLD-500 | 500 | 5.5 | 1.1 | 9 | 5 | 1250*900*1620 | 400 |
SLD-700 | 700 | 7.5 | 1.5 | 14 | 5 | 1250*900*1620 | 450 |
SLD-1000 | 1000 | 8 | 2.2 | 18 | 6 | 1450*1150*1770 | 500 |
SLD-1500 | 1500 | 11 | 2.2 | 21 | 6 | 1450*1150*1770 | 530 |
SLD-2000 | 5000 | 15 | 3 | 27 | 8 | 1600*1250*1870 | 570 |
Mold Dehumidifying Dryer operational principle: the air passes rotating honeycomb then blows off the dew on the mold to keep the mold clean. Our Mold Dehumidifying Dryer adopt imported rotating honeycomb, can provide the steady dew piont around -10 oC, make the injection mold far away from condensation of moisture, improve the products' quality effectively.
Graph
Technical Specifications
Model | Dry blower (m3/hr) |
Power of dry blower (kw) |
Power of rey.blower (kw) |
Power of rey. heater(kw) |
Pipe diameter (inch) |
Dimensions (cm) |
Weight (kg) |
---|---|---|---|---|---|---|---|
SMD-500 | 500 | 0.9 | 0.37 | 6 | 4 | 1220*980*1740 | 240 |
SMD-1000 | 1000 | 1.5 | 0.75 | 10 | 5 | 1220*980*1740 | 290 |
SMD-1500 | 1500 | 2.2 | 1.5 | 18 | 6 | 1560*1100*1930 | 320 |
SMD-2000 | 2000 | 3 | 2.2 | 24 | 8 | 1560*1100*1930 | 400 |
European Type Hopper Dryer is made from high quality of stainless steel to ensure that the materials won't be polluted. The out layer is made of special material which is fashionable and attractive. The high-efficiency insulation material between internal layer and out layer to reduce the heat loss. Hot air down-blowing design ensures the even temperature in the hopper. The temperature is controlled by the import PID temp. controller to ensure the precision temperature. The 24H timer can achieve device startup in advance to improve work efficiency.
Technical Specifications
Model |
(KG) |
(KW) |
(W)Blower Power |
|
The weight of the |
---|---|---|---|---|---|
SHD-40L |
25 |
4.2 |
120 |
620*680*1085 |
50 |
SHD-80L |
50 |
4.2 |
120 |
650*780*1310 |
60 |
SHD-120L |
75 |
4.2 |
120 |
680*790*1430 |
65 |
SHD-160L |
100 |
7 |
150 |
740*970*1560 |
70 |
SHD-230L |
150 |
7 |
155 |
770*1020*1730 |
80 |
SHD-300L |
200 |
12 |
380 |
920*1120*1980 |
100 |
SHD-380L |
250 |
12 |
380 |
950*1170*2080 |
130 |
SHD-460L |
300 |
14.5 |
400 |
1120*1010*2120 |
160 |
SHD-600L |
400 |
18 |
550 |
850*1400*2300 |
200 |
SHD-700L |
500 |
18 |
550 |
990*950*2100 |
230 |
SHD-800L |
600 |
24 |
750 |
990*950*2290 |
250 |
SHD-1000L |
700 |
30 |
750 |
1100*1050*2300 |
320 |
SHD-11000L |
800 |
30 |
1100 |
1100*1050*2500 |
370 |
SHD-15000L |
1000 |
46 |
1100 |
1145*1100*2700 |
490 |
SHD-17000L |
1200 |
40 |
1500 |
1200*1250*3100 |
550 |
SHD-2000L |
1500 |
45 |
2200 |
1200*1360*3330 |
600 |
SHD-2800L |
2000 |
50 |
2200 |
1385*1360*3330 |
700 |
SHD-3500L |
2500 |
50 |
4000 |
1400*1360*4170 |
800 |
SHD-4000L |
3000 |
54 |
4000 |
1500*1460*4170 |
880 |
The Hopper dust collector can be matched to prevent the dust into the workshop.The temperature is even in the barrel and the material sinters on time. There is a hinge connection structure between the heating barrel and the hopper, which facilitates opening, reloading and cleaning.The heating barrel is made from the stainless steel to ensure that the material is not polluted and easier to be cleaned. The air dispersion device of the stainless steel net plate enables the heat air to evenly blow the material. An open-door type magnetic base, which is convenient and easy to take out the magnet for cleaning the scrap iron. The timing startup device of any time can be matched to reduce pre-heating time on duty and improve efficiency.
Specification
Model | Capacity | Heater Power | Blower Power | External Dimensions | Seat Dimensions (k*k*j) | Weight ( kg) | |
---|---|---|---|---|---|---|---|
SHD-15 | 15 | 2.7 | 120 | 660-360-800 | 120*120*50 | 30-60 | 28 |
SHD-25 | 25 | 3.2 | 120 | 725*405-950 | 150*150*60 | 30-60 | 38 |
SHD-50 | 50 | 4.2 | 180 | 840*490*1070 | 160*160*175 | 125-500 | 75 |
SHD-75 | 75 | 5 | 180 | 900*550*1175 | 160*160*175 | 500-1000 | 85 |
SHD-100 | 100 | 7 | 250 | 955*605*1410 | 200*200*90 | 1000-1500 | 95 |
SHD-150 | 150 | 9 | 250 | 960*610*1560 | 200*200*90 | 1500-2000 | 120 |
SHD-200 | 200 | 12 | 400 | 1230*770*1660 | 230*240*105 | 2000-2500 | 150 |
SHD-250 | 250 | 14.5 | 400 | 1235*775*1790 | 230*240*105 | 2500-3000 | 170 |
SHD-300 | 300 | 14.5 | 400 | 1335*870*1820 | 230*230*110 | 3000-4000 | 200 |
SHD-400 | 400 | 18 | 500 | 1360*915*1870 | 280*280*120 | 4000-6000 | 225 |
SHD-600 | 600 | 24 | 800 | 1360*950*2080 | 280*280*135 | 6000-8000 | 250 |
SHD-1000 | 1000 | 37 | 3000 | 1400*1200*2600 | 280*280*135 | 8000-12000 | 360 |
Graph