Our Products
HT204 is a portable meter for power sun irradiation measurements, extremely compact and easy to use with photo sensor connected to the meter to perform accuracy readings. This model is the ideal solution to check and verify the parameters inside solar systems and industrial plants.
Function
Power sun irradiation up to 2000W/m2Manual zeroing with trimmerManual range of measurementSilicon photodiode sensorMAX/MIN functionData Hold functionSelection between W/m2 and BTU/(ft2*h)Low battery indication
Accessories
Standards
BatteriesCarrying bagCertificate of testUser manualEMC 2004/108/CE DirectiveCE MARK
AC / DC true rms Clamp meter with power quality analyzer function and Bluetooth connection with iOS/Android devices - CAT IV
HT9022 is a combination of a power quality analyzer, a phase sequence/conformity detector, a clamp meter and a voltage detector in one single handy device. The advanced design of HT9022 ensures reliable and accurate measurements under a wide range of operating conditions. HT9022 is the ideal instrument for troubleshooting power quality problems, calculating power factor correctors, recording energy consumption, recording DC power, etc. Unlike the data loggers that take snapshots of the electrical parameters in regular intervals, losing what happens between an interval and the next, HT9022 continuously records all electrical parameters as a true power quality analyzer. The internal memory enables long-term recording for further download to (and analysis at) a PC, and iOSAndroid smartphone via Bluetooth connection. HT9022 is flexible and portable to grant the user the most reliable measurements with an easy-to-use interface
Function
DC, AC + DC TRMS current up to 1000ADC, AC + DC TRMS voltage up to 1000VResistance and continuity testFrequency with test leadsFrequency with jawsPhase sequence / 1 wire phase correlationDC PowerActive, Reactive, Apparent power on Single phase systemsActive, Reactive energy on Single phase systemsPower Factor on Single phase systemsHarmonic voltage/current up to 25th with THD% calculationInrush currentData logger with programmable IPAutorangingBacklightAuto Power OFFData HOLDMAX/MIN/CRESTPC connection via BluetoothConnection with iOS Android devicesCAT IV 600V
Accessories
Standard
YAAMK0000HT0 : Couple of test leads
YAAMK0001HT0 : Couple of alligator clips
YABRS0000NN0 : Carrying bag
TOPVIEWS : PC Windows software
Batteries
ISO9000 calibration certificate
User manual on CD-ROM
Quick reference guide
EMC 2004/108/CE Directive
CE MARK
LVD 2006/95/CE Directive
Professional laser distance meter for measures up to 70m and Bluetooth connection with iOS and Android devices
The model iDM70 is a professional laser meter designed to measure distances between two points in a simple, fast and efficient way thanks to the integrated laser pointer and small size which make it a completely portable tool for use in every situation and in any application (buildings, electricity sector, DIY, etc.) where it may be necessary to perform a measure of linear length. The tool also allows you to perform calculations of areas and volumes and the indirect measure of heights 2 points and 3 points by using the trigonometric method and the principle of mathematical theorem of Pythagoras. The tilt angle measurement, a programmable timer and a small tubular spirit level for a perfect alignment of objects in the test are available features. The management of simple operations with the internal memory (sums and subtractions) and a backlight display complete the features available for the instrument. A dedicated HT LaserMeter APP, free downloadable on both iOS/Android devices, allows to manage the results of measurements performed by the meter (by Bluetooth connection) in way to share information by e-mail and/or social network (Facebook, Twitter, etc.)
Function
Direct measurement of distances from 0.05m to 70mMeasurement resolution: 0.001mArea and Volume calculationHeight measurement by indirect Pythagoras methodTilt angle and distance measurements2 points and 3 points continuous (dynamic) measurementsLaser pointer activation on measurementsSetting of measurement referenceSelection of m or ft measurement unitsManagement operation with internal memoryBluetooth connection with iOS/Android devicesTubular spirit levelTripod mountHigh contrast backlight displayBuzzer activation on keysAuto Power OFF
Accessories
Standard
Carrying bag
Batteries
User manual
User manual of HT LaserMeter APP
EMC 2004/108/CE Directive
CE MARK
The IV curve tracer SOLAR I-V has been designed to meet any requirement of photovoltaic installation testers. Further to providing the possibility of testing and measuring the efficiency of single-phase photovoltaic systems and also measures the I-V characteristic both of a single module and of module strings. Thanks to The IV curve tracer SOLAR I-V, the operator can test the photovoltaic system and, should it give a negative result, immediately identify the problems of the system in order to promptly solve them. The IV curve tracer SOLAR I-V is provided with the remote unit SOLAR-02 for measuring irradiation and temperature. The synchronization between main unit and remote unit, by radio-frequency (RF) wireless connection, guarantees the necessary simultaneity of measurements. The IV curve tracer SOLAR I-V also manages a database of photovoltaic modules, which can be updated at anytime. The measured IV characteristic is not affected by the resistance of the measurement cables, as it is carried out with the 4-terminal measuring method. The measured values, correctly reported at standard test conditions, are immediately compared with the values declared by the manufacturer to give the OK /NO result of the test. The operator must not do any calculation, the instrument carries out the comparison rapidly and automatically
Integrating Professional Class 1 Sound Level Meters
HT155 is a compact, strong and reliable Class 1 sound level meter for detection and recording of equivalent noise level Leq, Peak value measurements, control of sound level, acoustic pollution, etc. suitable to certify environmental noise level in working areas according to national regulations in force. Thanks to a powerful microprocessor and wide measuring range from 25 to 140 dB it is possible to effect simultaneously multiple functions (statistical analysis, 24 hour analysis, integral Leq analysis). The model is provided with an internal memory for saving recording results and USB interface for transfer of data to PC by using Windows software to display numerical, graphic and statistic data. The instrument is supplied with hard carrying case and a portable Class 1 calibrator for preliminary checks before starting any measurement.
Function
Measuring range 25-140dB"Peak", "Fast", "Slow" and Pulse integrationsA, C and Z (linear) frequency weightingPeak+ and Peak- measurement in C weightingStatistical noise analysis A weightedStatistical noise analysis over 24 hourscondenser microphone with pre-amplifierAC analogical outputClass 1 portable calibratorInternal memory for saving dataMini-USB output for connection to PCConnection with USB pen drive
Accessories
Standard
HT151 : Class 1 portable calibrator
Adapter 100-240V/5VDC with USB output
Mini-USB cable for PC connection
USB pen drive
USB cable for pen drive connection
Windproof protection
Windows software Sound View
Batteries
ISO9000 calibration certificate
User manual
Carrying case
EMC 2004/108/CE Directive
CE MARK
IEC60651:1979 Class 1
IEC60804:1985 Class 1
IEC61672:2002 Class 1