Product / Services
Post Buy Requirement
P2 Power Solutions Pvt. Ltd.
P2 Power Solutions Pvt. Ltd.
Noida, Uttar Pradesh, India
gstGST : 09AAECP0915G2ZK Verified Add Review
Call 08069247354 Ext. 262

Our Product / Services

  1. Filters 3 Products available
  2. Others 23 Products / Services available

Filters #4630052

Active Harmonic Filter

Active Harmonic Filter

Features

  • Fast 32 bit digital signal processor
  • Synchronous Rotating Frame Principal for best performance
  • Ultra fast compensation
  • Proven performance on welding
  • Harmonic Attenuation of more than 96%
  • Selective Harmonic compensation
  • Leading/Lagging Reactive Power Compensation
  • Negative Sequence Compensation (load balancing)
  • Zero Sequence Compensation (neutral compensation)
  • 15 possible Priority Selection settings for maximum flexibility
  • Smart auto fold-back to avoid over loading of filter
  • 7" touch screen display
  • Ethernet based remote monitoring
  • MODBUS RTU, USB, SD Card
  • Internal CAN Communication
  • Closed Loop & Open Loop operation
  • Paralleling of upto 32 filters for higher capacity
  • Operator Activity Log
  • >1, 00, 000 time stamped events can be logged in internal NAND memory

 

Benefits

  • Compliance with prescribed harmonic limits - No penalty
  • Unity Power Factor - higher savings
  • Reduced energy (kVAh) charges - higher savings
  • Reduced peak demand charges - higher savings
  • Reduced fuel consumption in generators - higher savings
  • Ultra fast compensation - effective with fast fluctuating load
  • Proven performance on welding
  • Optimum capacity utilization of electrical infrastructure
  • Optimum capacity utilization of backup generators
  • Improved voltage profile
  • Reduced risk of transformer failure - higher uptime
  • Reduced risk of equipment failure - higher uptime
  • Increased operational reliability - higher uptime
  • Compact footprint
  • Indigenous design, low maintenance and prompt service

Technical Specifications

Models p2p-415-apf3 p2p-415-apf4
Network Voltage 415Urms +10%/-15%
Connection 3P/4W 4P/4W
Grid Frequency 50Hz +/-5% (60Hz available on request)
Modularity Upto 32 units
Harmonic Filtering 2nd to 51st order
Individual Harmonic Selection Yes
Harmonic Attenuation >96%
Reactive Compensation Yes
Negative Sequence Compensation Yes Yes
Zero Sequence Compensation NA Yes
Compensation Open/Closed Loop
Reaction Time <100 micro seconds
Filter Consumption <3.0% of rated capacity (typical)
CT Specifications ratio based on peak load 0.5 class or better 15VA or more
Standards IEEE 519-1992 harmonic standards
USER INTERFACE
Interface 7" touch screen
Remote Interface Ethernet, MODBUS RTU
Configuration Settings Through User Interface and USB key
ENVIRONMENT
Protection Class IP41 (Higher on request)
Operating Temperature upto 45 degrees with adequate ventilation (upto 55 degrees with derating)
Operating Environment Indoor, Dust Free
Relative Humidity Maximum 95% (non condensing)
Altitude Upto 1000m

Download Product Brochure


Download Detail File : Click Here
View Complete Details
Ask Latest Price & Details
3-Level Active Harmonic Filter

3-Level Active Harmonic Filter

Features

  • Fast 32 bit digital signal processor
  • Latest 3-Level NPC2 converter architecture
  • Advanced RCT snubber with Active Damping
  • Synchronous Rotating Frame Principal for best performance
  • Ultra fast compensation
  • Proven performance on welding
  • Harmonic Attenuation of >98%
  • High Efficiency of >98%
  • Selective Harmonic compensation
  • Leading/Lagging Reactive Power Compensation
  • Negative Sequence Compensation (load balancing)
  • 15 possible Priority Selection settings for maximum flexibility
  • Smart auto foldback to avoid over loading of filter
  • 7" touch screen display
  • Ethernet based remote monitoring
  • MODBUS RTU, USB, SD Card
  • Internal CAN Communication
  • Closed Loop & Open Loop operation
  • Paralleling of upto 32 filters for higher capacity
  • Operator Activity Log
  • >2, 00, 000 time stamped events can be logged in internal NAND memory

 

Benefits

  • Compliance with prescribed harmonic limits - No penalty
  • Unity Power Factor - higher savings
  • Reduced energy (kVAh) charges - higher savings
  • Reduced peak demand charges - higher savings
  • Reduced fuel consumption in generators - higher savings
  • Ultra fast compensation - effective with fast fluctuating load
  • Proven performance on welding
  • Optimum capacity utilization of electrical infrastructure
  • Optimum capacity utilization of backup generators
  • Improved voltage profile
  • Reduced risk of transformer failure - higher uptime
  • Reduced risk of equipment failure - higher uptime
  • Increased operational reliability - higher uptime
  • Compact footprint
  • Indigenous design, low maintenance and prompt service

Technical Specifications

Model p2p-415-apf3T
Network Voltage 415Urms +10%/-15%
Switching Architecture NPC-2 Architecture Advanced RCT snubber with Active Damping
Connection 3P/4W
Grid Frequency 50Hz +/-5% (60Hz available on request)
Modularity Upto 32 units
Harmonic Filtering 2nd to 51st order
Individual Harmonic Selection Yes
Harmonic Attenuation >98%
Reactive Compensation Yes
Negative Sequence Compensation Yes
Compensation Open/Closed Loop
Reaction Time <50 micro seconds
Filter Consumption <2.0% of rated capacity (typical)
CT Specifications ratio based on peak load 0.5 class or better 15VA or more
Standards IEEE 519-1992 harmonic standards
USER INTERFACE
Interface 7" touch screen
Remote Interface Ethernet, MODBUS RTU
Configuration Settings Through User Interface and USB key
ENVIRONMENT
Protection Class IP41 (Higher on request)
Operating Temperature upto 45 degrees with adequate ventilation (upto 55 degrees with derating)
Operating Environment Indoor, Dust Free
Relative Humidity Maximum 95% (non condensing)
Altitude Upto 1000m

Download Product Brochure


Download Detail File : Click Here
View Complete Details
Ask Latest Price & Details
Multi-Level Active Harmonic Filter

Multi-Level Active Harmonic Filter

Features

  • Fast 32 bit digital signal processor
  • Multi-Level converter architecture
  • Direct Connection to 575V and 690V loads
  • Synchronous Rotating Frame Principal for best performance
  • Ultra fast compensation
  • Proven performance on welding
  • Harmonic Attenuation of >98%
  • High Efficiency of >98%
  • Selective Harmonic compensation
  • Leading/Lagging Reactive Power Compensation
  • Negative Sequence Compensation (load balancing)
  • 15 possible Priority Selection settings for maximum flexibility
  • Smart auto foldback to avoid over loading of filter
  • 7" touch screen display
  • Ethernet based remote monitoring
  • MODBUS RTU, USB, SD Card
  • Internal CAN Communication
  • Closed Loop & Open Loop operation
  • Paralleling of upto 32 filters for higher capacity
  • Operator Activity Log
  • >2, 00, 000 time stamped events can be logged in internal NAND memory

 

Benefits

  • Compliance with prescribed harmonic limits - No penalty
  • Unity Power Factor - higher savings
  • Reduced energy (kVAh) charges - higher savings
  • Reduced peak demand charges - higher savings
  • Reduced fuel consumption in generators - higher savings
  • Ultra fast compensation - effective with fast fluctuating load
  • Optimum capacity utilization of electrical infrastructure
  • Optimum capacity utilization of backup generators
  • Improved voltage profile
  • Reduced risk of transformer failure - higher uptime
  • Reduced risk of equipment failure - higher uptime
  • Increased operational reliability - higher uptime
  • Compact footprint
  • Indigenous design, low maintenance and prompt service

Technical Specifications

Models p2p-575-apf3M p2p-690-apf3M
Network Voltage 575Urms +10%/-15% 690Urms +10%/-15%
Connection 3P/3W
Grid Frequency 50Hz +/-5% (60Hz available on request)
Modularity Upto 32 units
Harmonic Filtering 2nd to 51st order
Individual Harmonic Selection Yes
Harmonic Attenuation >98%
Reactive Compensation Yes
Negative Sequence Compensation NA Yes
Compensation Open/Closed Loop
Reaction Time <50 micro seconds
Filter Consumption <2.0% of rated capacity (typical)
CT Specifications ratio based on peak load 0.5 class or better 15VA or more
Standards IEEE 519-1992 harmonic standards
USER INTERFACE
Interface 7" touch screen
Remote Interface Ethernet, MODBUS RTU
Configuration Settings Through User Interface and USB key
ENVIRONMENT
Protection Class IP41 (Higher on request)
Operating Temperature upto 45 degrees with adequate ventilation (upto 55 degrees with derating)
Operating Environment Indoor, Dust Free
Relative Humidity Maximum 95% (non condensing)
Altitude Upto 1000m

Download Product Brochure


Download Detail File : Click Here
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us