P S Technology

Chinchwad, Pune, Maharashtra

We are working with a group of professionals who make special emphasis on the products packaging and ensure that the material is procured from the reliable sources only. In order to ensure product compliance with stated quality norms, we conduct several tests at several stages.

 

Details :

• Power ON LED : It indicates the power supply to the unit.
• Motor ON LED: It indicates the motor ON and Off Condition
• Tank Level Indication LED: Two level visual indications – 25% (Low Level), 75% (Tank full level). Motor will automatically switch ON when the water level in the tank is low and automatically switch OFF within 1 second when the tank becomes full.  
• Manual Mode: Helps to switch ON the motor manually. In this mode, the motor will be running till the tank will be full . The product having special features of two relays for submersible Pump. one for starting capacitor and other for running capacitor. The three sensor electrode indicates the water level of the tank. Helps in preventing overflow of water from the overhead tank Input Voltage- 230V to 275 V(AC) Output Contacts-2 NO  Long Life Easy to install

Application:Automatic Microcontroller Based Water Level Controller is of much used in metro cities, bungalows, industries, hospitals and in luxurious apartments and homes. Use of this product saves water, saves electricity and saves time. Useful in case of bore well to tank set up. Booster Pump Control Panels Textile Machineries Garment Machineries Water Distribution Pumps House Submersible Pump Control Panel Package Boiler in Sugar Factory Heat Exchanger Steam Generators  

 

Advanced Microcontroller Based Water Level Controller (Auto Change Over)

•   Dual pump operation.
•   Control Sump (open well) pump as well as Bore well pump with automatic changeover technology
•   To suit where both the motors are used to pump water to Common overhead tank (Single Tank)

 

Three modes of operation.

•      OpenWell (sump) mode
•      Bore well mode.

 

Automatic Change Over Mode (Dual Mode)

• Four stage water level indicator for over head tank,
• Three stage water level of sump
• Water flow indication(Running Line),
• Over and under voltage level indication and protection
• By Pass facility in case for direct operation.
• Manual Soft Touch ON / OFF
• Support both Single Phase & Three Phase connection
• Easy integration with control panel

Basic Microcontroller Based Water Level Controller  - WLC-01Single tank - 2 level control relay   Indications –

• Empty
• Full
• Motor ON/OFF
• Control Switches
• Auto/ Manual Switch
• Relays
• 2 relay output.
• Relay Rating - 10A at 240V
• Sensors
• 3 Sensor stainless steel PVC coated
• Protection Type
•  Dryrun

 

Compatibility :

• Single phase starter panel Compatible
• Three phase starter panel Compatible

 

Microcontroller Based Water Level Controller for Upper Tank and Lower Tank (SUMP) - WLC-02

•   Dual tank - 2 level control relay
•   Indications –
•   Empty Over Head Tank
•   Full Over Head Tank
•   Empty Sump
•   Motor ON/OFF
•   Control Switches
•   Auto/ Manual Switch
•   Relays
•   2 relay output.
•   Relay Rating - 10A at 240V
•   Sensors
•   4 Sensor stainless steel PVC coated
•   Protection Type
•   Dryrun

 

Compatibility

•   Single phase starter panel Compatible
•   Three phase starter panel Compatible

Online Microcontroller Based Water Level Controller - WLC-03

•   Dual tank - 2 level control relay
•   Indications –
•   Empty Over Head Tank
•   Full Over Head Tank
•   Empty Sump
•   Motor ON/OFF
•   Control Switches
•   Auto/ Manual Switch
•   Relays
•   2 relay output.
•   Relay Rating - 10A at 240V
•   Sensors
•   4 Sensor stainless steel PVC coated
•   Protection Type
•   Dryrun

 

Compatibility

•  Single phase starter panel Compatible
• Three phase starter panel Compatible

Basic Microcontroller Based Water Level Controller Reverse Type- WLC-04Single tank - 2 level control relay When tanks gets full pump gets ON to siphon the water out of the tank and then tanks gets empty pumps gets OFFIndications –

•   Empty
•   Full
•   Motor ON/OFF
•   Control Switches
•   Auto/ Manual Switch
•   Relays
•   2 relay output.
•   Relay Rating - 10A at 240V
•   Sensors
•   3 Sensor stainless steel PVC coated
•   Protection Type
•   Dryrun

 

Compatibility

•   Single phase starter panel Compatible
•   Three phase starter panel Compatible

We support credit cards, purchase cards, PIN-less debit cards, bank account transfers for your utmost convenience. We have database that is maintained by the financial experts; they make sure that the transactions are made keeping all the details of the clients confidential. Stay rest assured for the products that we offer as they will remain damage free. For this, we make use of only premium packaging material for the packing

 

Key features:

• Protection against Phase Missing & Phase Reversal within 2 sec
• Multiple Time Zones
• Advanced Software based Digital Timer with missed time (due to blackout) operation e.g. if the ON TIME is 06:00 hrs and OFF TIME is 09:00 hrs and suppose there is no power in between 06:00 hrs and 08:00 hrs, the pump will remain on for the missing time i.e. pump will be on from 08:00 hrs to 11:00 hrs.
• Field configuration of times zones through soft touch key pads with Password protection.
• Battery based Real Time Clock as against capacitor based for nonstop operation for 2 years
• Phase Sequence and Phase Missing display on LCD
• Under voltage and over voltage protection
• Under current and over current protection
• Bright LED indicators
• 16 x2 Character LCD with bright LED backlight
• 10 A Relay with 1 NO
• Bypass Facility
• Wide Voltage Operation 190V AC to 270V AC, 50Hz
• Low Power Consumption
• Designed with Surface Mounted Technology for high reliability
• Reduced cost and commissioning time with protection, monitoring and control in a single device

MPS With Programmable Timer

•   Under Voltage & Over Voltage Protection
•   Under Current & Over Current Protection
•   Earth Fault
•   Dry Run protection
•   Programmable Timer with time memory backup
•   Time Totalizer-For recording total On time
•   Instantaneous Power Measurement-kW
•   Cumulative Active Energy kWh
•   Water Level Controller
•   Temperature Sensor-For detecting overheating of motor
• Single Phase Preventer
• Phase Reverse Protection
• Programmable Timer with the memory Backup
•  16*2 Character LCD Display

MPS With LCD

•   Under Voltage & Over Voltage Protection
•   Under Current & Over Current Protection
•   Earth Fault
•   Temperature Sensor-For detecting overheating of Motor
•   Single Phase Preventer
•   Phase Reverse
•   16*2 Character LCD Display

 

MPS (Blind)

•   Under Current & Over Current Protection
•   Earth Fault
•   Dry Run protection
•   Temperature Sensor-For detecting overheating of motor
•   Single Phase Preventer
•   Phase Reverse

AWLC 01- Dual Motor Change over

 

Advanced Water level Controller (Auto Change over)

• Dual Pump operation
• Control Sump (open well) pump as well as bore well pump with automatic changeover technology
• To suit where both the motors are used to pump water to Common overhead tank (Single Tank)

• Three Modes of operation.
  • Open Well (sump) mode
  • Bore well mode.
  • Automatic Change Over Mode (Dual Mode)

• Four stage water level indicator for over head tank,
• Three stage water level of sump
• Water flow indication(Running Line),
• Over and under voltage level indication and protection
• By Pass facility in case for direct operation.
• Manual Soft Touch ON / OFF
• Support both Single Phase & Three Phase connection
• Easy integration with control panel

Open Well (sump) mode When water in the sump tank gets below foot value level or the over head tank gets full, it automatically switch off the openwell pump to prevent electrical power loss , water wastage and dry run.

Borewell mode When the water in the overhead tanks gets full , it automatically switch off the submersible pump to prevent water wastage and electrical wastage. And it has also feature to prevent dryrun incase there is no water in bore to prevent submersible motor damage. Buzzer and visual indication is provided for dry run.

Automatic Changeover mode (Dual Mode) When there is water in the sump the system works on sump mode, when the Water in the sump tank gets below foot value Level it automatically switch over to the Bore well Mode. If the water gets filled in the sump tank the system Resumes back to Sump Mode.
This system is suitable where both sump motor & bore motor are used to pump water to a common overhead tank. The system every time checks for available of water in the sump and controls sump motor as first choice. If and when sump becomes dry, the system will automatically changeover to bore well motor. The system can be upgraded into “Multi-tank control system” to maintaiin water level in several overhead tanks.

Based in Pune(India), our organization is involved for years in supplying the finest grade of Smart Switch With Motion Sensor in the industry. We package the entire range of products with industrial-grade wrapping supplies that are environment friendly and safe. Furthermore, the packaging is sturdy to protect against damage and to make sure the product is kept quality assured.

 

Key features :

•  Voltage -200V – 280V AC, 50Hz
•  Output - 2 Kwatt load of Fluorescent Tube Light, CFL, Filament Bulb or any heavy load
•  Reach -10 meters
•  Angle of Coverage -102° Horizontal, 92° Vertical
•  Compact Design & easy installation
•  Load will get off if no motion is detected continuously for 5 minutes
•  Enhances life of Lamps & load by using Zero Crossing Switching
•  Applications- Room & Hotel Lighting, Car Parking & Garden Lighting, Intruder detector with light & Siren etc.

Smart Switch with Motion Sensor for Air Conditioner

•  Voltage - 200V - 280V AC, 50Hz
•  Output - 4000W load of 1.5 Ton AC
•  Reach - 10 meters
•  Angle of Coverage - 102° Horizontal, 92° Vertical
•  Compact Design & easy installation
•  Load will get off if no motion is detected continuously for 15 / 30 /45 minutes
•  Enhances life of Lamps & load by using Zero Crossing Switching Applications- Conference room, auditorium.

e are working with a group of professionals who make special emphasis on the products packaging and ensure that the material is procured from the reliable sources only. In order to ensure product compliance with stated quality norms, we conduct several tests at several stages. Details : Power ON LED : It indicates the power supply to the unit.Motor ON LED: It indicates the motor ON and Off ConditionTank Level Indication LED: Two level visual indications 25% (Low Level), 75% (Tank full level). Motor will automatically switch ON when the water level in the tank is low and automatically switch OFF within 1 second when the tank becomes full. Manual Mode: Helps to switch ON the motor manually. In this mode, the motor will be running till the tank will be full . The product having special features of two relays for submersible Pump. one for starting capacitor and other for running capacitor. The three sensor electrode indicates the water level of the tank. Helps in preventing overflow of water from the overhead tank Input Voltage- 230V to 275 V(AC) Output Contacts-2 NO Long Life Easy to install