P. K. Engineering

Edamalaipatti Pudur, Tiruchirappalli, Tamil Nadu

Feel free to drop a line to us anytime! We are a distinguished name as Manufacturer, Exporter and Supplier of Rubber Mounts (Vibro-3D) from Tamil Nadu, India. We are eminent in making available Multi-Directional Anti-Vibration Mount Suspension of exhaust gas pipes. One can purchase this from us at the cost-effective prices.

Details :

• The new antivibration mount Vibro-3D is one of the few antivibration mounts that can support vibration of every direction (x, y, z)
• Vibro-3D is designed to sustain impulsive loads in the entire three axis, so it’s capable to receive high vertical or lateral shocks with minimum danger of destruction
• The main internal elastic material is polyurethane foam with semi closed cells, which is produced in Germany by BSW with the trademark Regufoam®
• Full range of its mechanical behavior diagrams, conducted in the University of Dresden, are available on request

Applications :

• Support of Freon cooling pipelines
• Mounting of high RPM engines
• Mounting of electronic devices
• Suspension & on-wall fastening of loudspeakers
• Anti-seismic protection of machines

We have made our mark as Manufacturer, Exporter and Supplier of Rubber Mounts (Vibro-EP) from Tamil Nadu, India. The Rubber Mounts that we deal in are designed by professionals having wide know-how. Over the years, we have attained maturity in handling bulk orders delivering them within a stipulated time period.

Details :

• Vibro-EP is a product of specialized research and it has been produced in this form since 1989
• It is made from first-rate quality elastomeric material combined with special substances for its further improvement
• Its longitudinal holes increase the provided compression and improve vibration absorption
• They can be used in multiple layers with the use of steel plate in between, in order to reduce the natural frequency down to 4 Hz (Vibro-EP Complex)

An anti-vibration elastic pad, suitable for :

• Vibration control
• Passive machinery protection
• Easy to install
• Suitable for large loads applications
• Anti-vibration Supports : Air-compressors - Air conditioning units – Pumps – Fans – Generator sets – Cutting machines etc.
• Floating Supports : Industrial floors – Elevators – Printing machines – Testing machines etc.

Dimensions : 50 x 25 x 2, 5 cm - 12, 5 x 12, 5 x 2, 5 cm - 6 x 6 x 2, 5 cm

Type :

• Elastomeric special rubber compound : (grey - blue - red)
• Neoprene : (beige - green - yellow)

Our Rubber Mounts (Vibro-Mini) is antivibration solution for light weight machinery. Our Rubber Mount is anti-vibration support suspension of machinery such as air conditioning units, ventilators etc. The ceilings are made up of gypsum board. Buyers can obtain Rubber Mounts (Vibro-Mini) at the most reasonable prices. One can count on us!

Details :

• The Vibro-mini, can be fixed with an anchor on the floor, be suspended on the ceiling through anchors and also be placed on a metal base with a passing through screw of Μ8 mm
• Due to its pioneer design, the Vibro-mini gives big deflection when loaded
• As it’s known - Larger Deflection Means Better Antivibration Results
• The anchor rod of the suspension must be perpendicular
• The passing through screw eliminates the possibility of falling of the machinery in case of destruction of the elastic part
• The weight of the machinery must be applied on the top surface of Vibro-mini

Attention : Do not screw the holding screw tight. The screw and the nut must not compress any elastic part. It is important not to forget to put the Vibro-minis neck through the hole and to place it on the elastic washer and on the metal base. Dynamic Characteristics Load range 8 - 20 kp* Natural frequency over 15 Hz.

Our Rubber Mounts (Vibro-EM.2) are fabricated by adroit personnel using top of the line quality rubber for their production. We are a distinguished Manufacturer, Exporter and Supplier of Rubber Mounts (Vibro-EM.2) from Tamil Nadu, India. Compact in design, our Mounts are non-corrosive even under the hard and corrosive conditions. Place retail order, medium order or bulk one, we have strong relation with the transport service provider and can guarantee timely deliveries of them all.

Details :

• The Vibro-EM.2 is specially design mount for shock and vibration control
• All metal parts are covered by rubber to avoid corrosion and have friction strips both on top and bottom
• The perimetrical cylindrical fin of Vibro-EM.2 (patented) in combination with the metal galvanized cup offer protection against oil petroleum, water and sunrays.

Widely used especially when it is necessary to fasten the machine, our Rubber Mounts are comprehensively selected by the buyers. We are a reliable Manufacturer, Exporter and Supplier of Rubber Mounts (Vibro-EM.3) from Tamil Nadu, India. We are instrumental in offering top quality Antivibration Elastic Mounts (Type 3) to all the buyers spread all over the world. In order to fulfill bulk and urgent demands of the buyers, we maintain a huge stock in our state-of-the-art warehouse.

Applications :

• Air handling units
• Air conditioning Pumps
• Air compressors
• Ventilators
• Transformers
• Motor generators
• Cutting machines printing machines lifts etc.