Otto Valves and Rubber Industries

Baranpura, Vadodara, Gujarat

Manufacturer & Trader ofPneumatically Operated Diaphragm Valve. Our Chem air actuators are suitable for mounting on the Diaphragm Valves of sizes 25mm to 150mm. They are suitable for ON/OFF service with at pressure.

They Come in three types :

APC- Air Pressure to Close Spring to Open APO- Air Pressure to Open Spring to Close APB- Air Pressure for both Open and Close

We are proficient providers of premium Diaphragm Valves that are available in a variety in materials of construction and offer unmatched performance. Usually cast iron is used in the manufacturing of these valves and non ferrous material to fabricate wear out parts. The world class weir design provides them with efficient closure at low stem loads and facilitates the users with easy interchangeability of parts. These are operated using a hand wheel as these are reinforced using synthetic fabric. Our valves require minimal lubrication using nipples as per the type of liquid being replacement at predetermined intervals. In case of any replacement requirement, these valves are isolated and drained prior to opening the bonnet .and finally. Our valves help in cutting down capital and recurring expenses and are widely demanded across diverse sectors namely, Chemicals, End User Chemicals, Food and Beverage, Mining, Nuclear Power, Pharmaceuticals, Pulp & Paper, Sewage Treatment and Water Treatment.

Manufacturer and exporter of Rubber Lined Butterfly Valves, Slim-Seal design, maintenance free shutoff. This butterfly valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs.
		Slim Seal design Butterfly Valves body seat mechanism have a very low torque, tight shut off with zero leakage, compact actuator selection, and long life smooth easy operation. The slim-seal, center disc design valves are widely available with different combination of body, seat & disc materials to satisfy the need of most industrial application.

We are engaged in offering to our clients superior quality Check Valves that allow liquids to pass through them into a single direction. These mechanical devices are extensively used in areas susceptible to corrosion and hazards or high purity media is involved. As far as their structure is concerned these are basically two-port valves, one allowing the liquids to enter and other for the discharge of liquids. Most of these valves do not have a valve handle or stem as these work automatically and does not require any external control. These are offered by us in a variety of shapes, sizes, specifications and at nominal prices.

We are one of the most renowned Industrial Valves Exporters of India. Our quality Industrial Valves are maintained as per the international standard with American Standard of ASTM-D and BSI Specification (BS) of British Standards. We render array of Industrial Valves such as Industrial Ball Valves and Industrial Control Valves. Our Valves are durable and ensures trouble free performance. The quality raw materials used in our Valves empowered them high efficiency and effectiveness. Industrial Valves provided by us are technically sturdy and tensile due to which they can be used with great ease. Our products need low maintenance and available at pocket friendly prices.

Our Globe Valves are Outside Screw, Rising Stem, Bolted Bonnet Construction, threads are away from the line fluid and easy to lubricate. Globe Valves are generally available with Plug Type Disc, which is designed to give leak tight seating over a long period of in built wear life. Globe valves body seat ring is shoulder type, threaded body seat ring which has large taper area that is for ample seating. Two nos. slots are provided on body seat ring, which is for easy removal for servicing at site. Welded type seat ring & Integral seat ring are also available in . Globe Valve. All Globe Valve stem is made from solid one piece construction. The yoke bush of Globe Valve has a long thread engagement for accurate stem alignment. The standard range of Globe Valve in sizes of up to 12 (300mm]

Salient Features :
		Body & Bonnet made from high quality casting with liberal sections. The castings are precision machined for high performance Rising Stem & Rising Hand Wheel Construction. Die molded Graphite (Grafoil) Packing Rings, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions and also suitable for higher temperature. Deep stuffing box is providing for tightness and maximum long packing life. Swinging Eye Bolts facilitate easy access to the stuffing box. Back seating feature facilitates repacking of the stuffing box on line with the valve in fully open position. Seat Ring Screwed in to the body (Replaceable Type) or integral type. Stellited Disc, Seat Ring & Back Seat can also be offered on special request. Higher Pressure & Higher Size Valves are provided with Thrust Bearings and also with Gear drive arrangements.

Manufacturer of Lined Check Valves.This Lined Check Valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs.

Our clients can avail from us a wide assortment of Wafer Type Butterfly Valves that are fabricated using high grade cast iron. These easy to install valves are available in varied specifications and sizes. The valves offered by us are widely appreciated by the clients for their accurate dimensions, light weightedness and maintenance free life. Our valves offer excellent regulation performance and are widely demanded in the processing of various liquids across the chemical industry.

We are among the most prominent Diaphragm Valve Manufacturers of India. We serve products according to the American Standard of ASTM-D and BSI Specification (BS) of British Standards. Our Diaphragm Check Valve is made from optimum quality raw materials, which ensures high efficiency and gives trouble free performance. Our products are durable and can be handled at great ease. The parts of the valves afford interchangeability facility and provide long-term reliability. We provide Diaphragm Control Valve made up of latest technology, which ensures proper functioning for longer period of time. Our valves are widely used for Engineering and other industrial purposes, as they are appropriate for all kinds of corrosive fluids.

Salient Features :-

• Efficient working
• Easy to maintain
• Minimal resistance flow
• Consistent leak tightness
• Glandless construction
• Longer life

Applications :-

• Engineering industry
• Chemical industry
• Gas industry
• Electrical industry

Manufacturer of Lined Check Valves.This Lined Check Valves excess other conventional valves such as gate valve and globe valves in all aspects, especially in terms of light weight, less number of component, no flange gaskets required and economical operation and maintenance costs.

Knife Gate Valves are specifically designed and manufactured according to MSS SP81 to meet the worst working conditions in Pulp & Paper, Mining & Steel, Power & Chemical Industries to handle Semi-Solids, Dry-Ash, Chips, Fiber contents Pulps etc. The compact design of the Valves facilitate light weight, minimum space for installing, easy operation and maintenance. The compact Knife edged Wedge is manufactured from Stainless Steel Plates of various grades irrespective of Body material.