Manufacturer & Exporter of Tank Erection Jack. Our product range also comprises of Hydraulic Jacks, Hydraulic Hand Pumps and Hydraulic Power Packs. Orione Hydropower Tank Jacking equipment are used to manufacture oil tank equipment.

Technical Specifications:

12 MT, 18 MT, and 25 MT Capacity
Standard models suitable for 2500 mm shell width
Special models available for higher shell width upto 3000 mm
Manufactured under strict quality control norms
Tested at 1.5 times rated capacity
Trained operators are deputed for operation

Leading Manufacturer and Exporter of Hydraulic Jacks such as Mono Strand Jack, Hollow Ram Jack, Low Height Jack, Flat Jack and General Purpose Jack from Navi Mumbai.

Mono Strand Jack
Hollow Ram Jack
Low Height Jack
Flat Jack
General Purpose Jack

Specifications:

Capacity - 3 ton to 30 ton
Stroke - 100 mm to 1000 mm

Item Code:HRJ-01
Hollow Ram Jack - Plain Ram, Double Acting Oil Return
Application :-
As hydraulic pullers with mechanical accessories for removing and assembling bearing bushes, pins, cylinder liners, pulling tubes of heat exchangers, gears and flanges of machinery.

As per / pre - stressing jacks in construction sites.

Working Pressure :-700 bar

Specifications :-
Capacity - 10 ton to 100 ton
Stroke - 50 mm to 150 mm

Low Height Jack - Plain Ram, Single Acting, Spring Return

Application :-
Low Profile design for use in confined area.

Used in Power and Steel Plants, Ship building / Ship repair and Construction.

Caution - Provide level and solid support for entire jack base area since the ram guide length is small.

Specifications:
Capacity - 10 ton to 200 ton
Stroke - 30 mm to 60 mm

Flat Jack - Single Acting, Spring Return

Application :-
Compact and flat design ideally suited where clearance is minimum for insertion of jack.

Mounting holes for easy fixturing. Used for structural weld positing, rigging in bridge construction, heavy fabrication and maintenance.

Caution-Provide level and solid support for entire jacks base area since the ram guide length is small.

Specifications:
Capacity - 5 ton to 200 ton
Stroke - 8 mm to 16 mm

Item Code:GP-01

Light Metal General Purpose Jack - Plain Ram, Single Acting, Spring Return

Features :-
Almost half the weight of steel jack same specifications.
Composite bearings as guide avoid metal to metal contact
Inhibits corrosion resistance.

Application :-
Standard Multi purpose jacks
Guide rings at piston and gland nut facilitate to use in all directions when centrally loaded
Base mounting holes are optional

Specifications :-
Capacity - 20 ton to 200 ton
Stroke - 150 mm

Manufacturer & Exporter of Tank Erection Jack. Our product range also comprises of Hydraulic Jacks, Hydraulic Hand Pumps and Hydraulic Power Packs. Orione Hydropower Tank Jacking equipment are used to manufacture oil tank equipment.

Technical Specifications:

12 MT, 18 MT, and 25 MT Capacity
Standard models suitable for 2500 mm shell width
Special models available for higher shell width upto 3000 mm
Manufactured under strict quality control norms
Tested at 1.5 times rated capacity
Trained operators are deputed for operation

Leading Manufacturer and Exporter of Hydraulic Jacks such as Mono Strand Jack, Hollow Ram Jack, Low Height Jack, Flat Jack and General Purpose Jack from Navi Mumbai.

Mono Strand Jack
Hollow Ram Jack
Low Height Jack
Flat Jack
General Purpose Jack

Specifications:

Capacity - 3 ton to 30 ton
Stroke - 100 mm to 1000 mm

Item Code:HRJ-01
Hollow Ram Jack - Plain Ram, Double Acting Oil Return
Application :-
As hydraulic pullers with mechanical accessories for removing and assembling bearing bushes, pins, cylinder liners, pulling tubes of heat exchangers, gears and flanges of machinery.

As per / pre - stressing jacks in construction sites.

Working Pressure :-700 bar

Specifications :-
Capacity - 10 ton to 100 ton
Stroke - 50 mm to 150 mm

Low Height Jack - Plain Ram, Single Acting, Spring Return

Application :-
Low Profile design for use in confined area.

Used in Power and Steel Plants, Ship building / Ship repair and Construction.

Caution - Provide level and solid support for entire jack base area since the ram guide length is small.

Specifications:
Capacity - 10 ton to 200 ton
Stroke - 30 mm to 60 mm

Flat Jack - Single Acting, Spring Return

Application :-
Compact and flat design ideally suited where clearance is minimum for insertion of jack.

Mounting holes for easy fixturing. Used for structural weld positing, rigging in bridge construction, heavy fabrication and maintenance.

Caution-Provide level and solid support for entire jacks base area since the ram guide length is small.

Specifications:
Capacity - 5 ton to 200 ton
Stroke - 8 mm to 16 mm

Item Code:GP-01

Light Metal General Purpose Jack - Plain Ram, Single Acting, Spring Return

Features :-
Almost half the weight of steel jack same specifications.
Composite bearings as guide avoid metal to metal contact
Inhibits corrosion resistance.

Application :-
Standard Multi purpose jacks
Guide rings at piston and gland nut facilitate to use in all directions when centrally loaded
Base mounting holes are optional

Specifications :-
Capacity - 20 ton to 200 ton
Stroke - 150 mm