Our Products
Industrial Machinery
2 Products availableCurtains
2 Products availableSecurity And Inspection Devices
1 Products availableSpying & Intelligence Devices
1 Products availableMachines And Equipments
1 Products availableHydraulic Machines
1 Products availableTextile Processing Machinery
1 Products availableOur product range contains a wide range of EH2 Series Capacitive Sensor, P3S Series Proximity Sensor, T3V Series Photoelectric Sensor and T6N Area Sensors, Bin Sensors
| Capacitive Sensor With Adjustable Sensitivity | ||||||||
|
We are the main supplier of this product.
We are the main supplier of this product.
| Ultra-slim Body Area Sensors / Bin Sensors | ||||||||||
| ||||||||||
| Note: This device is an Area Sensor / Bin Sensor and must not be used as a Safety Sensor/ Device for human safety for protection of hand or part of body. It does not incorporate a self checking circuit for safety functions necessary to be allow its use as a safety device. A system failure may result in an energised or de energised contact element. |
| Number of Optical axis | 8 Optical axis | 12 Optical axis | 16 Optical axis | |||||
| Type | T6N-XN8 | T6N-XN12 | T6N-XN16 | |||||
| T6N-XP8 | T6N-XP12 | T6N-XP16 | ||||||
| Sensing height | 140mm | 220mm | 300mm | |||||
| Sensing object | Opaque object:φ30mm min. | |||||||
| Sensing range | 4m | |||||||
| Beam pitch | 20mm | |||||||
| Voltage | 12~24V DC pulse(P-P)±10% max. | |||||||
| Current consumption | Emitter | Job indicator ON | 0.7W max. | 0.8W max. | 0.9W max. | |||
| Job indicator OFF | 0.6W max. | 0.7W max. | 0.8W max. | |||||
| Receiver | Job indicator ON | 0.7W max. | 0.8W max. | 0.9W max. | ||||
| Job indicator OFF | 0.6W max. | 0.7W max. | 0.8W max. | |||||
| Output | (NPN) NPN Open-colletector transistor - Maximun sink current�100mA - Applied voltage�30V DC max. (between output and 0V) - Residual voltage� 1V max.(sink current�100mA) 0.4V max.(sink current�16mA) |
(PNP) PNP Open-colletector transistor - Maximun sink current�100mA - Applied voltage�30V DC max. (between output and +V) - Residual voltage� 1V max.(sink current�100mA) 0.4V max.(sink current�16mA) |
||||||
| Output operation | ON when all Optical axis are received(OFF when one or more Optical axis are interrupted) | |||||||
| Short-circuit protection | Incorporated | |||||||
| Response time | 10ms max.(when the interference prevention is used�12ms max.) | |||||||
| Indicators | Emitter | Emitting indicator: Green LED x 2(Light up during emission;one LED lights up for Frequency Asetting, both LEDs light up for Frequency B setting) Job indicator:Red LED(Lights up,blinks or lights off when the job indicator input is applied,selected by operation mode switch) |
||||||
| Receiver | Operation indicator:Red LED(Lights up when one or more Optical axis are interrupted) Stable incident beam indicator:Green LED(Lights up when all Optical axis are stably received) Job indicator:Red LED(Lights up,blinks or lights off when the job indicator input is applied,selected by operation mode switch) * When an excess current flows through the output,the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. |
|||||||
| Interence prevention function | Incorporated | |||||||
| Ambient temperature | Operating:-10~+55�, Storage:-10~+60�(with no icing or condensation) | |||||||
| Ambient humidity | Operating:35~85%RH, Storage:35~85%RH(with no condensation) | |||||||
| Emitting element | Infrared LED(modulated) | |||||||
| Degree of prcaotection | IEC-IP40 | |||||||
| Material | Enclosure�Heat-resistant ABS�Lens cover� Polyester�Indicator cover� Acrylic | |||||||
| Weight | Approx�350g | Approx�400g | Approx�450g | |||||
AS Anand (Orbital Systems Bombay Private Limited)
F-129, Ansa Industrial Estate, Saki Vihar Road ,
Andheri (E), Mumbai - 400 072, Maharashtra - 400072
Share us via
Write a Review
