Testing Equipment #5809646

Defesko PosiTest Manual Pull Off Adhesion Tester is now available in India.

Now DigitalMeasures adhesion of coatings to metal, wood, concrete and other substrates Revolutionary self-alignment feature and pull rate indicator brings new meaning to adhesion measurements.

This machine tests the elasticity and adhesive qualities of lacquers, paints and other protective coatings applied to a metal substrate. It also Measures adhesion of coatings to metal, wood, concrete and other substrates

Scratch Hardness Tester is automatically operated using aA test panel is clamped driven by constant speed while needle scratches the surface. By increasing the load determine at which load needle is penetrating. It is a suitable apparatus for conducting tests related to resistance to scratch under a specified load. The equipment can be used for a wide variety of products such as paints, lacquers and varnishes.The automatic scratch hardness tester is highly recommended for the paint and plating industry and has been designed for repetitive use in industries and laboratories, where quality control tests need to be conducted. The scratch test is carried out either on a go/no go basis by testing at a single specified load on the needle or by increasing the load to determine the minimum load at which the coating can be penetrated. It is a durable and highly reliable instrument. The automatic scratch hardness tester strictly conforms to BS 3900, IS 101, ISO 1518, ASTM D5178, and ASTM D2197 specification standards and comes complete with instruction manual conformance certificate. Scratch hardness motorized tester operates on power supply of 230V AC supplied along with standard loads of 250, 500, 1000, 3, 000 gm weights.

The conical mandrel bend tester is used to determine properties of a coating. Resistance to cracking detachment from its substrate and its elongation during the test. Conical mandrel test is also known as standard method for assessing the flexibility and the adhesion properties of coatings when these are subjected to bending stresses This is accomplished by bending the test material around a conically shaped metal bar. The conical mandrel bending test is a commonly used for testing for painted or coated panels.

• Cloud pour point are indicators of the lowest temperature of utility for petroleum products. The sample is periodically examined while it is being cooled in the cloud pour point apparatus. The highest temperature at which haziness is observed (cloud point) or the lowest temperature at which movement of the oil is observed (pour point) is reported as the test result.
• Three, Four and Five test chambers.
• Individual built inCFC-freesingle / cascade refrigeration system with eco-friendly refrigerant.
• Individual digital temperature control system.
• Each compartment is designed to accommodate 4 test jars at a time.
• Each compartment is having 4 test jackets.

• Open cup.
• Heating air bath with temperature controller and gas regulator.
• Test assembly with oil cup, gas ignition device lifting handle for oil cup.
• Power supply : 230 V, 1 Phase, 50 Hz.

Specification:

Microcontroller with alpha numeric key pad having built-in temperaturecontroller with temperature range up to 400 degree centigrade, resolution of0.1 degree Centigrade and accuracy of +/- 0.1 degree Centigrade similarlybuilt-in timer with range 999.9 seconds.

plated weights. Digital Display: Individual MFI, MVR, Melt Densityresults average results.

Graphic display and printout through PC:Impact energy Vs Angular displacement graph and
numeric reports consisting of values for impact strength as per ASTM standard, ISO and IS
standard in different units could be obtained by attaching a printer to the PC.

Direct display through MMI :Set pressure, Actual pressure, Set time, Actual time, Set temperature and Actual temperature.

Graphic display and printout through PC :In addition to the above values Pressure Temperature Vs Time graph could be obtained for any station by attaching a printer to the PC.

Material of construction

Inner bath : S.SOuter Body : M.S

Minimum maximum dimensions of specimen: 5 mm to 25 mm

One number of Template for ASTM D 638 Type I for tensile would be included in the supply with this equipment.

Additional vacuum system will be provided for collection of waste material during test.

Seat Impact Tester to check the impact effect on the seat surface of the plastic moulded chairs.

SpecificationA pneumatic cylinder of 400mm stroke and diameter of 40 mm and electrically operated solenoid valve will be provided to move the piston To Fro. An 18 kg weight will be provided to check impact on furniture. A counter will be provided to count the number of trials. Four hard chrome plated shafts of 2.0 meter height will be provided. A lock will be provided to adjust the height of box containing pneumatic cylinder and solenoid valve.

A compressor having pressure between 5 kg/cm2 to 10 kg/cm2 will be arranged by you.

Back punch Impact Tester to check the impact effect on back of the plastic moulded chairs.

SpecificationA pneumatic cylinder of 300mm stroke and diameter of 40mm and electrically operated solenoid valve will be provided to move the piston to fro. An 3.2 kg weight will be provided to check impact on furniture. A counter will be provided to count the number of trials. Four hard chrome plated shafts of 1.5 meter height will be provided. A lock will be provided to adjust the height of box containing pneumatic cylinder and solenoid valve.

A compressor having pressure between 5 kg/cm2 to 10 kg/cm2 will be arranged by you.

ENLARGE VIEW

Double Walled well insulated tank with proper insulation for the doors also.Offered capacity: From 200 litres to 5000 litres capacity.

Stainless steel manifolds placed in the walls of the tank having quick release couplings

Inside and out for easy handling of hoses coming from panel outside and going to the pipe

Features:

• Measure rich DC parameters of manifold semiconductors, e.g. diode, transistor, controlled silicon, FET.
• Measure capacitor, varistor, DC voltage signal source
• Measure 78 and 79 three terminal voltage regulator
• Data hold, low battery warning
• Complete with carry case and six 1.5V AA batteries

Features:

• Six test voltages cover 100V, 250V, 500V, 1000V, 2500V, 5000V for flexible application
• Measure insulation resistance to 200G with 0.01m resolution
• Data hold, auto range, auto power off, LCD background light
• Complete with test leads, heavy duty carry case and six 1.5V AA batteries

Features:

• CPU controlled, simple operation
• Auto data hold
• High voltage output automatically delay for 30s
• Fault protection, buzzer alarms if short circuit
• Equipped with an external DC power supply socket.
• Powered by 4 x 1.5V AAA batteries and by mains 230V AC.
• Dimension: 140 x 100 x 48 mm
• Weight: 500g including Batteries
• Accessories: Main Adaptor, Instructional manual, Test Leads

Features:

• Soil Resistivity measurement
• Conductor resistance measurement
• Rechargeable NICD Batteries

• Power off two modes : (a) Manual off i.e. any time by depressing the power key till OFF shows on the display (b) Auto off: after 2 min from last key operation

Features:

• Light weight
• Easy to operate
• Less maintenance
• Reliable accuracy

Specifications:

• Unique 4 digits LCD display Auto adjust/reset, with reset button Illumination button for use in dark ( Auto shut off after 10 seconds)
• Power source: 3 X 1.5V AA regular batteries or rechargeable batteries or get the power supply from the cigarette lighter socket in car.
• Measuring range: 0.000 to 1.000 mg/l BAC
• Accuracy: /- 0.015% BCA at 0.05% BAC
• Blowing time: 4 to 5 seconds continuously.
• Automatic switch off after 30 seconds.
• Calibration: Availed upon request (recommended every 12 months).
• Removable mouthpiece, easy to clean and replace.

Features of Water Penetration Tester:

• Equipment is portable.
• Very convenient to use.
• White AATCC textile blotting paper is used for testing.
• Ensures accurate results.

Features of Water Repellency Tester:

• The tester is suitable for measuring the water-repellent efficiency of finishes applied to fabrics, particularly plain woven fabrics.
• Evaluation is accomplished by comparing the wetted pattern with pictures on a standard chart.

Features of Automatic Twist Tester:

• Micro-controller based electronic twist tester.
• Motor driven fully automatic instrument.
• Auto stop facility for motor.
• In-built sensor.
• Alphanumeric backlit LED display unit.
• Keyboard with 16 soft touch keys.

Features:

• Tensile strength and elongation of Yarn can be effectively determined.
• Force rating upto 9.999 kg
• Crosshead speed is 20 to 400 RPM variable.
• Extremely powerful interactive software makes the machine versatile.

Features of Sublimation Fastness Tester:

• Testing the effect of direct heat on the dyestuff.
• up to 250C temperature range.
• 3 pairs, 6 heat pads.
• 10 to 60 seconds contact timer.
• Individual3 temperature controllers with sensors.
• Can test entire range of temperature in a single test.
• Individual6 temperature controllers with sensors.

Features of Stiffness Tester:

• It has a solid aluminium base with nylon foot-rest to keep the base horizontal.
• The equipments parts are made of stainless steel.
• It has a calibrated scale.

Features of Light Fastness Tester:

• An effective and essential fabric garment testing equipment.
• It is used to determine the color fastness and degradation of textiles to Sunlight.
• This standard model comes with a 500 watt MBTL lamp.
• Automatic voltage stabilizer.
• Stainless steel clamps.
• Gray scale for assessing change in color L-4 standard extra cost.

Features of Washing Fastness Tester:

• It is fabricated out of quality stainless steel.
• Possess electric heater to heat water in water bath.
• The microprocessor based programmer is provided for temperature control.
• Buzzer to indicate the completion of the process cycle or step.

Feature of Crimp Rigidity Tester

• The instrument is based on test method.
• The tester can be used for both polyamide and polyester texturized yarns.
• Instrument mounted on a sturdy metal base. Compact and portable.
• Heating arrangement for measurement of hot Crimp contraction.