Measuring Instruments & Equipment #5809646

Salt spray test is also called as Fog Test. This is an accelerated environmental corrosion test in which metal specimens are exposed either continuously or intermittently to a fine mist of salt-water solution used to evaluate the resistance to corrosion of paints, coatings, or electrical connections. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends of the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion.

In the salt spray test cabinet painted / coated panels, automobile components i.e Electro-plated, Painted, and Anodized etc are exposed to a mist of salt over a period of test duration. Saturated air produced by spraying common salt solution into an enclosed cabinet creates humid atmosphere upto 98%. The articles being positioned for this accelerated corrosion test in such a way that they are exposed to the hot mist produced in the chamber, through the controlled air and liquid nozzles. The instrument is suitable for testing as per IS /BS / ASTM standards. Testing is carried out at 35 deg cent. Or even upto 50 deg cent.

Wet sponge holiday detector or wet sponge pinhole detector. The multi-voltage pinhole detector, which uses the wet sponge principle to detect through pinholes, cracks and damaged areas in protective coatings up to a maximum thickness of 500 microns. Pinhole Detectors or wet sponge tester detects pinholes, voids, thin spots, foreign inclusions, or contamination in coatings film. Dielectric srenth of film also refered as holiday detection.

Model PD-990 is a low voltage holiday detector / wet sponge tester operation is by the application of a wet sponge to the coating. The flaw can now be marked for repair and further testing resumed. Coating on metals prevents to corrode unless a protective coating is applied. Pinholes based on wet sponge method generally caused by air entrapment that is then released from the surface, or by the entrapment of particulates (dust, sand, etc.), which do not stay in place. High voltage holiday detector is used for testing coatings above 500m and low voltage holiday detector (Pinhole Detector ) is used below 500m of coating on metallc substrates.

asic economical glossmeteruses plastic shell and one-body standard board. All kinds of coating and finishing surfaces, such as paints, varnishes, printing ink, etc. Decorative materials, such as marble, granite, polishing brick, ceramic tile and so on. The other kinds of materials and objects, such as plastic, woodenware, paper, etc

Gloss meter complies with international standards such as ASTM D523, D2457, DIN 67530, ISO 2813, ISO 7668, JIS Z8741, BS3900, BS 6161 and more.

Gloss meter has knob protector for operating with ease. Gloss Meter is Small, smart, stable, simple to use and operated on a single AA battery.

Most economical digital gloss meter price in India. We also provide calibration services for gloss meters

Main Technical ParametersReading Range0.0 199.9GU

Indication Error 1.2GU

Measuring Area2010 mm

Incidence Angle 60Deg

Volume LWH 1233865 mm

Main Weight 300g

Power Supply DC 1.2 1.5 One AA-size battery

3 digit LED display with facility for temperature compensation digital cell constant adjustment along with conductivity cell.(Table Model)

A research grade instrument with 128 X 64 large graphical LCD display having auto temp. compensation, auto buffer recognition, fluid resistant housing rotational electrode stand along with accessories. Its features include 3 point calibration. Data storage facility up to 1000 samples, complete with pH electrode, temp. probe, rotational electrode stand, dust cover instruction manual, computer interface through USB

Features

Digital Large size LCD display Range 5% to 40%

Resolution 1%

High Resolution response quickly Date Hold can hold value

Power one 9V battery Dimensions 126 X 70 X 29 mm

Operating Temp 0C to 40C (32F to 104F) 0 to 70% RH

Application:Used for fast and accurate measurement of moisture and temperature in the process of Allotment, acquisition, storage, machining of packed grains, feedstuff, powder.

Temperature 10 55

Accuracy: b. 1(OVER 18) 6. TEMP: 0.8

Calibration: automatic

Power supply: 41.5V AA (UM 3) battery

• Comprising of electronically controlled Furnace with digital temperature controller
• High grade alloy metal round ball. Thick Gauge stainless steel vessel with magnets.
• Fully automatic digital stop watch automatically gives audio-alarm when the currie-point reaches and displays the time in hold mode.
• Inbuilt digital timer with hooter with flashing indication and reset push button.

Features:

• Fast sampling
• Max Hold
• Data Hold
• Auto Power Off
• Above 200 PPM, the beeper sounds continuously

Features:

• Fitted with digital meter
• Resistant to high voltage
• Accurate results

Specifications:

• Universally usable analogue clamp meter in a compact housing.
• 11 ranges in 5 functions
• AC current measurement up to 1000 A (4% full scale)
• AC voltage measurement up to 600 V (4% full scale)
• DC voltage measurement up to 300 V (3% full scale)
• Resistance measurement up to 200k ohms (3% full arc)
• Data Hold function
• Clamp opening 48 mm
• Power supply: 11.5V, IEC LR03 Fuse 0.5A 250V
• Model: TEMPTEC (Big Display, 3 line Display)
• With 3 meter sensor probe clock
• Humidity Range: 15 99% R.H.
• Temp. Range: Indoor: -50 C to 70 C Outdoor: -50 C to 70 C
• Model: TH- 103 (Jumbo Display, 2 line Display) With 1 meter sensor probe
• Humidity Range: 20 99% R.H

Features:

• Accurate performance
• Longer functionality
• Save the panel space with its lesser depth

• Led digital display : voltage, current, power, power factor, frequency
• All measurements are Trms
• Automatic Range
• Accuracy : 0.5
• Not affected by external noise
• Min Measuring current is 0.5 mA
• Support data latching
• can be set lower and upper alarm function, PASS the light is Green, NG the light is Red, Easy to distinguish.

Application:

• Applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton paper, building, soil and other fiber materials.

Features:

• Displaying: LCD Displaying
• Max. Displaying: 1999 (3 Digit) Auto Polarity indication.
• Low battery indication
• Operation environment: (040) C, RH.

Features:

• Battery Type: 9V(6F22)x1
• Certificate: CE Approval , CATIII 1000V
• Long life

Features of Digital Yarn Tension Meter:

• This instrument is manufactured in an easy to handle design, size and weight.
• Gives accurate results.

How Digital Yarn Tension Meter works?

• Press I/O button to start tension metre and wait till 0.0 value is displayed.
• Hold the sensor in the direction of the path of yarn.
• Then press T (Tare) button and wait for 0.0 value is on screen.
• Pick up yarn with the help of sensor and make 120-160 degree angle of yarn in the middle of two bands.
• Now slide yarn in the center of bands and sensor.
• Then maintain the passage of yarn by pressing instrument back side and get actual reflection of load.