Chennai, Tamil Nadu, India
Our Products
Our Complete range of products are Ultrasonic Thickness Gauge, Digital Surface Profile Gauge, PAINT THICKNESS TESTER, Digital Coating Thickness Gauge and Coating Thickness Gauge.
Ultrasonic thickness gauge which also known as D Meter is suitable for non destructive testing of thickness measuremet on variety of metallic and non-metallic materials. Ultrasonic thickness gauge is operated on micro controller based principle. NDT (Non Destructive Testing) technique is simple and instant thickness measurements are possible. LCD display for quick and best rediability. Digital Ultrasonic Thickness Gauge is useful for Steel, Mild Steel, Stainless Steel, Cast Steel, Cast Iron, Aluminum, Copper, Lead, Tin, Brass etc. Ultrasonic Thickness Gauge (D Meter) is pocket sized instrument can be taken to any place like Work Shop, Off sites.
Ultrasonic thickness gauge ( Pocket D Meter ) adopts the theory of sound wave to measure a wide range of material, such as metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. Most economical price ultrasonic thickness wall thickness measurements is possible very accurately using this handheld gage.
Features
| Two-Point Calibration | Pocket sized |
| Feather touch pad | Velocity or measurements |
| Larger LCD display | Built in calibration block |
| Auto V path corrections | Can be used by unskilled operator. |
| Range 0.75mm to 300mm | Operated on 9V Battery |
| Auto sleep and auto power off function to conserve battery life | |
The digital surface profile gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured in accordance with the ASTM standard. digital surface profile gauge is highly useful and users friendly tool for paint, coating, and corrosion inspection.The gauge is initially set to zero with the glass zero plate and the foot is then placed on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valley, allowing the gauge to display the peak to valley height. A number of measurement can be made and the average taken.In addition the gauge can also be used to measure the effects of corrosion i.e. pitting and cavity depth etc. Instrument is supplied with calibration certificate traceable to national standards. Surface Profile Gauges are also known as Needle Gauge.Supplied in Carrying Case with Glass Zero Plate, Alen Key, and Battery fitted.An Analogue Surface Profile Gauge is also available.
| Surface Profile Gauges | |
| R1005 | Analogue Profile Gauge (2µm resolution) |
| R1020 | Digital Profile Gauge (1µm resolution) |
Paint Thickness Gauge can be operated by unskilled workers with single keypad operation and automatic switch off when no reading is being taken.Paint thickness tester for all types of application to measure thickness of paint, epoxy, powder coating, foil film, thin panel sheets, paper, automotive, car painting booths and repair shop etc. It works on non destructive principle. Highly sutaible for automotive and car manufacturers.
The digital paint thickness tester measures thickness on steel including body panels, engine components, and wheels has measuring range measures range up to 1500 and accuracy of up to 2m / 2%.Paint Thickness gauge is a pocket size tester, which also enables checking the condition of motor car body paint and determining thickness of the painted surface. Enables to check weather the car was painted for the second time or the body was repaired. Makes possible finding places where filler was laid and how thick it was done. Help to reduce expensive paint materials and improve finish consistency and quality. Highly useful tester for insurance survey, automobile ancillary manufactures.
Features:
Application:Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage
Tanks, etc. in industries of petroleum, shipbuilding, power station, and machine manufacturing.
| Specification | |
| Display: | 4 digits, 10mm LCD display |
| Measuring range (metric/imperial): | 1.5mm to 200mm, 0.06 – 8inch |
| Operating principle: | ULTROSONIC |
| Materials measured: | only 11 types of materials, including steel, cast iron, aluminium, red copper, brass, zinc, quartz
glass, polyethylene, PVC, gray cast iron, nodular cast iron |
| Lower limit steel pipes: | 15×2.0mm, 20×3.0mm determined by the transducer |
| Calibration: | Self calibration. 5mm (0.197 inch) test block included |
| Resolution: | 0.1mm |
| Accuracy: | ±(0.5%n+0.1) |
| RS232C interface: with RS232C | |
| Power supply: | 4×1.5V AAA (UM-4)battery |
| Battery indicator: | low battery indicator |
| Operating Temperature humidity: | 0C to 50C , ≤80%RH |
| Weight: | About 208g (not including battery) |
| Dimension: | 160 x 68 x 32mm (5.5 x 2.8 x 1.2 inch) |
| Accessories: | Carrying case, User manual, Probe for sensing Glycerin bottel |
| Optional Accessories: | 6M6mm thin Material probe: Measuring range(steel): 1.0 50.0mm Operating temperature: -10C to 60C , 5M12high temperature probe: Measuring range(steel): 1.0~225.0mm(normal temperature) Measuring
range(steel): 4.0~100.0mm (high temperature) Operating temperature: -10 ºC to 300ºC |
