Laboratory Equipments #5809646

1. Temperature range from Heated ambient +5C to 70C
2. SD port allows easy validation tracking between bath and PC.
3. Improved software memory logs cleaning parameters allowing easy cycle repeatability and easy traceability of cycle number, time, temperature and Sonics validation
4. Easy to use digital LCD control panel with user settable parameters to suit individual requirements.
5. Accurate process control of time, temperature, ultrasonic activity, degas and power
6. Stainless steel basket designed specifically to generate maximum ultrasonic activity, prevent items resting on the tank and prevent operators coming into contact with chemical solutions. Included as standard.
7. Ergonomic ABS plastic lid reduces noise volume and minimizes potential of aerosol escape. Included as standard.
8. Drain valve for convenient emptying
9. Clean finish, high-quality and robust design for long-term reliability and durability.
10. Analogue timer (digital timer optional)
11. Digital microprocessor based temperature controller

A water bath is a laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. Reciprocating shaking water bath has an extra control for shaking, which moves liquids around. Shaking feature can be turned on or off. It is designed for a wide range of temperature-controlled shaking protocols, such as Northern and Southern Hybridization, Destaining of gels, Incubation of cells or bacterial cultures as well as Wash Processes. The temperature range, which goes up to 99C also allows you to use the bath as a Boiling Bath.

The Shaking Water Bath is equipped with a PID Controller for easy temperature selection, rapid heat up and excellent stability. A high quality, robust design with a unique shaking mechanism that allows you to easily switch from orbital mode to reciprocating mode by simply reversing the tray.

1. Microprocessor based control system.
2. Can accommodate samples with an outside diameter of 10-30 mm.
3. Provides controlled concentration of sample vials through the application of nitrogen gas within a heated water bath.
4. The dual band spring hoist assembly provides a simple and effective means of removing samples from the heated water bath.
5. Circular rotating design permits each sample to be accessible from the front of the instrument for easy insertion and retrieval.
6. The chrome plated needle valves are individually milled from solid brass, enabling precise, uniform adjustments for your nitrogen blow down.
7. Efficient and safe sample reduction with minimal nitrogen waste.
8. Long lasting and user friendly technology
9. Gas flow can be controlled at each sample position via needle valves
10. Nitrogen filter
11. High pressure phthalate free tubing for safety, Teflon tubing for no contamination
12. Needles, 4 inch x 19 gauge with polypropylene hub and stainless steel shaft
13. 220v wiring harness (optional)
14. Z-Purge/intrinsically safe purge case (optional)
15. Acid resistant coating on instrument and needles (optional)
16. Side control box with built-in digital controller, timer, and pressure regulator (optional)

1. 1. Versatile usage
   2. Ergonomic Design
   3. Energy Efficient
   4. Long life
   5. Low Maintenance
   6. Calibration And Protocol Documentation
   7. CFC free refrigeration unit
   8. Microprocessor based temperature controller (HMI+PLC as an option)

1. Printer report program (optional)
2. USB ports (optional)
3. Real time data acquisition system (optional)
4. profile control(MULTIPLE PROGRAMMING) (optional)
5. timer (optional)
6. RS 232/485 interface (optional)

Refrigerated baths offer a completely integrated refrigerated circulating system for open or closed applications, with a temperature range from -35C to +100C. Our refrigerated water baths are widely used for day to day bacteriological and varied laboratory applications requiring incubation as well as general tests and procedures in variety of research and testing laboratories including Wassermann, Kilmer tests. Apart from that, these refrigerated water baths have a variety of usages in tissue culture applications, enzyme reaction studies, growth observation studies, fermentation analysis and various other general and specialized applications in various laboratories.

We specialize in both standard and customized models, specifically designed to meet the challenging demands of various test areas.

1. 1. Versatile usage
   2. Ergonomic Design
   3. Energy Efficient
   4. Long life
   5. Low Maintenance
   6. Calibration And Protocol Documentation
   7. PID based temperature controller (HMI+PLC as an option)

1. Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
2. Corrosion Resistant Interior and Exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the baths to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
3. Energy Efficient The baths uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
4. Sturdy Construction The baths are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.
5. Printer report program(optional)
6. 232/485 interface (optional)
7. USB ports (optional)
8. Real time data acquisition system (optional)
9. profile control(MULTIPLE PROGRAMMING) (optional)
10. timer (optional)

Water bath is a laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. Circulating water baths (also called stirrers ) are ideal for applications when temperature uniformity and consistency are critical, such as enzymatic and serologic experiments. Water is thoroughly circulated throughout the bath resulting in a more uniform temperature.

We specialize in both standard and customized circulatory water bath equipments, specifically designed to meet the challenging demands of various research applications

• • Splash-proof key pad with integrated mains switch
  • Felling level indicator
  • Powerful immersion pumps, suitable for continuous operation
  • Easy filling form the top with hinged protective lid
  • Low liquid level protection with optical and audible alarm signal
  • Removable venting grid for cleaning of the condenser
  • Low Liquid Level Protection
  • RS232 interface for PC-connection (Optional)
  • Calibration And Protocol Documentation
  • Air cooled refrigeration unit
  • CFC free refrigerant
  • Microprocessor based temperature controller (HMI+PLC as an option)

• Aesthetically Designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the baths to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient The baths uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
• Sturdy Construction The baths are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.
• USB ports (optionalReal time data acquisition system (optional)

A water bath is a laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. Water baths are widely used for day to day bacteriological and varied laboratory applications requiring incubation as well as general tests and procedures in variety of research and testing laboratories.

We specialize in both standard and customized models, specifically designed to meet the challenging demands of various test areas.

Salient Features:

1. 1. Versatile usage
   2. Ergonomic Design
   3. Energy Efficient
   4. Long life
   5. Low Maintenance
   6. Calibration And Protocol Documentation
   7. PID temperature controller

1. Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
2. Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the baths to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
3. Energy Efficient the baths uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
4. Sturdy Construction the baths are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

• Interior construction of stainless steel 304
• Outer construction-PCRC sheet /SS 304 (as per requirement)
• 75mm glass wool insulated on five sides
• Provided with High speed stirrer with speed regulator
• Control panel provided on the side of oil bath two neon lights and an ON/OFF switch.
• Perforated and removable diffuser shelves
• Microprocessor based temperature controller
• Aesthetically designed-Designed according to the standards and principles underlining industrys aesthetic values.
• Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the baths to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient the baths uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
• Sturdy Construction the baths are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Mains operated with optical density in 2

Digit LED display, Range 400 to 700nm, 1ml solution measurement. Accessories on Request:

a)Selenium Photo Cell

Standard Glass Filter (each color) c)Test tube (set of 5)

• Double walled construction with inner cylindrical Dewar flask and outer metal casing with toughened glass window provided on the front side.
• Low wattage fluorescent lamp at the rear illuminates the dewar flask.
• Bakelite cover plate with openings for 2 viscometers.
• A well balanceCFC-freesingle / cascade refrigeration system with eco-friendly refrigerant.
• Motorized stirrer provides adequate liquid transfer, both vertical and horizontally.
• Fully automatic microprocessor based PID controller having feather touch key board with PT-100 sensor.
• Liquid capacity 12 Litres.
• Efficient stirring system.
• Excellent temperature uniformity in the bath 0.1C.

• Centrifugation provides a convenient means of determining sediment and water content in crude oil, fuel oils and middle distillate fuels.
• Also used in determining the precipitation number, demulsibility characteristics, trace sediments insolubles in used lubricating oils.
• With centrifuging chamber, swing out rotor head 4 test place with test tubes, buckets, pads and rack to accommodate 4 tubes.
• Four Conical Centrifuge glass tubes.
• Flameproof AC motor with AC frequency drive.
• RPM meter with variable speed control.
• Fulfils international safety requirements.
• Centrifuge chamber is totally isolated from control panel.
• Heating elements are casted in ceramic beeds with fiber glass sleeving to avoid vapor contact.
• Safety interlock to prevent centrifuge operation while the lid is unlocked.
• 3mm dia port hole on the lid for extracting vapour and maintaining the pressure in the chamber at slightly below atmospheric. Any vapour extracted can be safely discharged into a non-hazardous area.
• In the event of failure of main temperature controller the high accurate safety digital temperature controller will take over temperature controlling.
• Maximum rpm 1850 with digital rpm indicator.
• Mechanical timer 0 60 minutes.
• Temperature maintains at 60C, 3C. Digitally Controlled.
• Floor model of capacity for 200 mm long x 37 mm dia tapered bottom 100 ml centrifuge tubes.

Ductless Fume Hood provide protection to both laboratory personnel and the environment from toxic fumes. Ductless fume hoods are considered as independent systems that do not require connection to the extraction systems. Unlike conventional fume hoods, these hoods filter out chemical fumes and recycle air directly back to the laboratory, providing energy savings, personnel and environmental protection, convenience as you do not have to deal with complicated ducting systems, and mobility, since ductless hoods are independent systems which do not require connection to extraction systems.

With a Ductless Fume Hood it is essential that the filter medium be able to remove the particular hazardous or noxious material being used. As different filters are required for different materials, recirculating fume hoods should only be used when the hazard is well known and does not change.

Fume Hoods are equipments that are used to ensure safety for the user as they wont be exposed to too many hazardous and dangerous fumes. Fume Hood capture the fumes/effluents released during any given experiment, contain them in the enclosure and then emit through their well-designed exhaust system.

We specialize in standard Fume Hood and customizedChemical Fume Hood. Fume hoods typically protect only the user, and are most commonly used in laboratories where hazardous or noxious chemicals are released during testing, research, development or teaching. They are also used in industrial applications or other activities where hazardous or noxious vapors, gases or dusts are generated or released.

Direct display and printout through microcontroller :
Set RH, Actual RH, Set temperature and Actual temperature.

Graphic display and printout through PC:In addition to the above values, % RH and Temperature Vs Time graph could be obtained by attaching a printer to the PC.Paint :Powder coated.Power :230 Volts, 50 Hz, Single phase.

Air circulation :Radial fan (It saves power
at least 20% by re-circulating the same hot air
inside the oven).

1. Clear LCD Display
2. Dual Infra-Red Sensor
3. Safety thermostats and over temperature protection
4. Easy to use
5. Round-Corner Chamber Design
6. Low noise level
7. Unique HEPA filtration system removes 99.97% of all airborne microbes and isolated particulates 0.3 microns or larger.
8. Gas seal screen
9. ISO certified
10. Two point CO2 calibration
11. Quick clean shelf system with allows users to disassemble shelves without tools
12. CFC free refrigerator system
13. RS 232 interface
14. CFC free refrigeration unit

Theseair jacket tri gas incubatorsfeature a stainless steel chamber with easy to clean, round corner chamber design and non-corrosive interiors with an antimicrobial coating that offers natural antimicrobial protection upon contact. The equipment adopts a direct heat air jacket heating system for faster heating and rapid temperature recovery. The air jacket also provides insulation from external temperature fluctuations, ensuring greater temperature stability and uniformity. The units are also provided with easy-to-remove, replaceable shelves for segregation of different samples.

Thetri gas incubatorsfrom Weiber come equipped with a well-designed O2/N2 inlet module with dual gas nozzles. They use a multiplex gas system for mixing of multiple gases and maintaining their precise concentration up to an accuracy of +/- 0.1%. These multiple gas control systems use microprocessor based controllers for accurate estimation of O2 levels within the incubator, initiating addition of O2 or N2 as per the requirement. The equipment uses high quality IR CO2 sensors that respond extremely fast to any changes in the gas concentration, thereby ensuring long-term stability of CO2 concentrations. The maintenance free Zirconium oxide sensors provide precise control of O2 concentrations. The built-in air pump allows O2 set-point regulation up to a maximum of 40%. The equipment also comes equipped with an active humidification system for maintaining the adequate humidity levels, therefore providing optimal growth conditions and preventing the cultures from drying out

1. Consists of independent, modular, water-proof lamp banks that can be conveniently expanded for accommodating a large sample size.
2. Light banks can be controlled individually, allowing complete flexibility in terms of intensity and the area of illumination.
3. Features top-mounted or side-mounted LED lights that are appropriately positioned within the chamber to provide uniform illumination throughout the working area.
4. Equipped with a light wave control function for controlling the illumination levels.
5. Energy efficient
6. Microprocessor based temperature controller for highly precise and consistent temperature control.
7. Automatically switches to the cooling mode in case of overheating and start heating up once the temperature drops below the set levels.
8. Provided with an over-temperature protection function that prevents the working temperatures from exceeding beyond the set limits.
9. Digital LED display for displaying the set and working temperatures.
10. uses efficient fans and motor for maintaining a uniform air circulation
11. low noise and vibration free operation
12. CFC free refrigeration unit
13. Surfaces with highly resistant and non-corrosive powder coat finish
14. Portable
15. Easy installation
16. Versatile usage

1. Compact and lightweight.
2. Magnetic Rotating/Rocking Platform Clip Plate System holds almost any container at any angle.
3. Expansion kits available for increased capacity and different containers.
4. Viewing Window to inspect samples without affecting chamber environment.
5. RS232 Port for computer control /or data logging.
6. Chamber air is gently continuously recirculated ensuring temperature consistency and uniformity.
7. Economical, Space Saving and Secure.
8. An 3-D Orbital Shaker Attachment turns the unit into a 3-D Shaking Incubator.(OPTIONAL)
9. crystal-clear backlit LCD displays all parameters in any lighting conditions at a glance
10. Two Integrated High Speed/Low Speed Magnetic Stirrers
11. Programmable Timers and Alarms for temperature and/or mixing Ideal for hybridization
12. Horizontal Orbital Attachment is ideal for Western Blots and maintaining cells or solutions in suspension(optional)

The hydroponics chambers come equipped with PID microprocessor controllers for highly precise control of temperature, humidity, CO2 concentration and other operational parameters. They use PLC based HMI interactive control panel for maintaining the accurate and optimum temperature levels. The units are also provided with temperature sensors for continuous monitoring of the working temperature and non-dispersive infrared gas sensors for accurate estimation of the CO2 concentration within the equipment. These growth chambers are also provided with efficient fans and motor, designed for no-vibration and noise-less operation. They help in maintaining a uniform air flow through continuous air circulation, ensuring uniform distribution of temperature and humidity for optimum plant growth.

These large capacityincubator shakerscan accept both smaller flasks of 50ml capacity as well as large flasks with a capacity of up to 6L. They are compact enough to be used as bench top models and can also be operated as regular floor mounted units. The equipment features a unique retractable platform that allows easy loading and unloading of samples and also comes equipped with clamps, test tube holders and other accessories to allow mounting of flasks, test tubes and beakers of various sizes. The equipment can be used for continuous shaking or it can be timed for specific applications.

Theseincubator shakersuse programmable PID microprocessor based controllers for highly precise control of the operating parameters and an integrated digital display for accurate set point regulation. It comes equipped with audio and visual alarms for alerting the user in case of set point deviations. The equipment is provided an easy to use key pad that allows direct calibration of speed and temperature for increased accuracy. It also comes equipped with lamp banks for adequate illumination of the interiors.

The equipment also features a superior air circulation system comprising of efficient heaters and powerful convection fans. The heaters provide faster heating for rapid temperature equilibrium, whereas the fans maintain uniform air circulation for increased temperature homogeneity.

1. Consists of independent, modular, water-proof lamp banks that can be conveniently expanded for accommodating a large sample size.
2. Light banks can be controlled individually, allowing complete flexibility in terms of intensity and the area of illumination.
3. Features top-mounted or side-mounted LED lights that are appropriately positioned within the chamber to provide uniform illumination throughout the working area.
4. Equipped with a light wave control function for controlling the illumination levels.
5. Energy efficient
6. Microprocessor based temperature controller for highly precise and consistent temperature control.
7. Automatically switches to the cooling mode in case of overheating and start heating up once the temperature drops below the set levels.
8. Provided with an over-temperature protection function that prevents the working temperatures from exceeding beyond the set limits.
9. Digital LED display for displaying the set and working temperatures.
10. uses efficient fans and motor for maintaining a uniform air circulation
11. low noise and vibration free operation
12. Surfaces with highly resistant and non-corrosive powder coat finish
13. Portable
14. Easy installation
15. Versatile usage
16. CE Approved
17. Connect with DC power source directly e.g. solar power source.
18. Connect with AC power source through an AC/DC adapter.
19. Anti-discharge protection for battery.
20. Automatic turnoff when voltage is low.

1. Removable shelf for putting and turning egg.
2. Automatic Digital frequency control and display.
3. Auto-temperature and auto-humidity control
4. auto-alarming facility
5. Electronic egg turning control with electric actuator and programmer for auto-turning of eggs
6. Microprocessor based temperature control.
7. Science loop ventilation system for adequate ventilation
8. Efficient heater, controlled by electronic system with probe display
9. Accuracy of control temperature: 0.1C
10. Hatchability above 95%
11. Suitable for hatching all types of hens eggs
12. Efficient fans and motor for maintaining internal air circulation and uniform distribution of heat

1. Advanced shaking mechanism for adequate agitation and aeration
2. Suitable for timed as well as continuous applications
3. Digital PID microprocessor based controllers for precise temperature control
4. Easy to read, digital LED/LCD display for actual and set parameters
5. An over-temperature protection feature with independent thermostat
6. Beltless Drum Mechanism for increased efficiency
7. Brushless DC motor for reduced noise and trouble-free, long-lasting operation
8. Can be timed or runs in continuous mode
9. Timer for setting operating time up to 99 hours
10. An interlock stops motion when the door is open
11. Shelf located at upper part of chamber, and Shaker at lower part of chamber
12. Variable Flask Tube Support
13. Light Bank for illumination
14. ISO certified

Mains Input :230V/50Hz 110V/60Hz A.C. SupplyW x D x H :160(W) x 190(D) x 115(H)Body :Metal BodyWeight :3.0 Kg. NetSpeed :0 2500 RPM ( Variable )Operation modes :Touch Or Continuous

Mains Input :230V/50Hz 110V/60Hz A.C. SupplyW x D x H :168 (W) x 232 (D) x 93 (H)Body :Metal BodyWeight :2.3 Kg. NetTemp. Controller :Digital TypeTemp. Range :37C To 70CAccuracy :+0.5C @ 37C, +3% Except 37CHeating Block :24 Holes of 12.7mm Diameter or As Selected any oneTimer :1 To 999 ( Digital Type )

Capacity :As per Selected RotorMain input :220v , 50Hz / 110v , 60HzMax. Speed :As per Selected RotorSize :(W) 355 x (D) 410 x (H) 280 mmWeight :14 Kg. NetMotor :Brush less motorSpeed Regulator :Programmable preset rpm
with + / 3% accuracyRPM Indicator :LCD type preset actaul rpmTIMER Indicator :LCD type preset remaining
time up to 60 minutes

Rotor :Swing out type [Horizontal]Capacity :As Per Selected RotorMain input :220v, 50Hz, / 110v, 60HzSpeed :Variable Up To 4000 RPMTimer :Digital Timer (1 to 30 minutes)Size :(W) 325 x (D) 293 x (H) 230 mmWeight :8Kg. NetMotor :BRUSHLESS MOTORR.C.F :As Per Selected RotorTop Cover :Transparent Poly Carbonate