My ExportersIndia

For Buyer

For Seller

For Help

Our Products

Our offered Product range includes A - Scan Machine - US - 1000 and Scan Machine.

Refurbished Medical Equipments

as a manufacturer of medical equipments and surgical microscope we have the technology and service support for Opto fine instruments pvt. ltd aims to provide worlds greatest technologies at affordable price.
To do this we decided to sell Refurbished Medical Equipments Manufactured by
Gastroscope by olympusColonscope by olympus3 CCD HD CameraMicro DebriderDyonics Shaver SystemZeiss Microscope (Optics)Dyonics

Endoscopy Camera

Digital Endoscopy Camera with On Screen Display
Features
Video output 2 composite and 2Y/C
OSD (On Screen Display)
Digital Singnal Processor (DSP)
Micro Controller
Shtter Speed upto 1/100000 sec
White Balance AUTO / SET upto 6, 500K
Complete to SONY CCD 1/3"
10 bit ADC
Specification
TV System PALImage Sensor 1/3" CCD cameraActive Pixel 752(H) x 582(V)Scanning Line 625Resolution 470 lineResolution vertical 42 lineSignal/Notice ratio 50 dB
View Complete Details

Endoscopy Camera - OPTO FINE - V1.1

Digital Endoscopy Camera with On Screen Display
Features
Video output 2 composite and 2Y/C OSD (On Screen Display) Digital Singnal Processor (DSP) Micro Controller Shtter Speed upto 1/100000 sec White Balance AUTO / SET upto 6, 500K Complete to SONY CCD 1/3" 10 bit ADC
Specification
TV System PALImage Sensor 1/3" CCD cameraActive Pixel 752(H) x 582(V)Scanning Line 625Resolution 470 lineResolution vertical 42 lineSignal/Notice ratio 50 dB
View Complete Details

Fiber Optic Cable

The cold light source contains built in reflector type halogen 150W / 250W bulbs which gives cold bright white light. Its features contains built in heat absorbing filter (optional). Light weight toradial transformer to increase life of bulb. Built in 4" fan for better cooling which increases fiber optic cable tip life.
Fiber Optic Headlight
Light weight fiber optic headlight available with built in zoom facility. The headlight is made of fiber body having arrangement of adjustment on top ab/nd back to get firm frip on head.

Skin Graft Expander - SGE


The Skin graft is usually put through a speical machine callled skin graft expander, The expander will cut tiny slits in
the graft, which allow the graft to stretch for coverting large burn area with less skin.

With its unique design it guarantees to transform a skin graft into an efficient graft provider increased area coverage.
Its design facilitateseasy and accurate meshing of tender skin in the thickness range of 0.2 to0.8 mm and
width upto 120 mm.

The aluminium base holds two inclined plates. The front plates supports the skin graft when it isintroduced between
the two roller. The upper spacers, lower spacers and cutters are manufacturedfrom stainless steel special alloy for
corrosionresistance and also heat treated for required hardnessand wear resistance.

Skin graft expander is available in four expansion rations 1:2, 1:4, 1:6, 1:8 the skin strips of the meshed graft have a
uniform width of 1.76 mm he blade design (cutter) eliminates the need for resharpening. Skin graft expander can be
autoclaved at 1340C (2790F) for 20 minutes or according to hospital procedure.

Model Expansion
Ratio
Sking thickness
(mm)
Widths Available (mm) Mesh Size
(mm)
Recommended for
SGE-2 1:2 0.2-0.8 32/64 3.7 Cosmetic, Orthopedic & Plastic Surgery
SGE-4 1:4 0.2-0.8 32/64 7.5 Burn Therapy, Plastic & Reconstructive Surgery, It is a most commonly used model.
SGE-6 1:6 0.2-0.8 32/64/120 11 Used for large surface coverage in severyly burnt patients. High expansion ratios are used when the skin graft is of limited supply
SGE-8 1:8 0.2-0.8 32/64/120 15
 

 




View Complete Details

Xenon Light Source

Xenon light cold light source, which is special source equipment for medical apparatus, as well as an equipment matching variety of endoscopic.When be used in the Clinical, the product can supply good illumination, imaging clearly for various endoscopic; the other hand, to provide good lighting for the doctors when examination, treatment, surgery and photography and video the organs in the body cavity.
II. Performance Summary
Xenon cold light sourceadopts advanced electronic control circuit switches to provide high-pressure short-arc xenon lamp with power.The source selects the spherical, high pressure, short-arc xenon lamp as luminous body. In the circuits high press-trigger, makes light bulbs discharge point luminous between positive and negative electrodes. Have the entire spectrum light source from ultraviolet to infrared radiation, visible light color close to sunlight.
The output with small ripple but ripple but constant current, make xenon lamp is with stable arc, high efficiency, and good color. To prevent other medical equipment in operations generated high frequency from interfering cold lights normal work, during design, by adding a low- pass filter into the system in the end of entrance line of clod source, to enhance the overall stability, thus the camera work of clinical observation will obtain satisfied result.
The strength of the cold light output is controlled by the touch switch on the panel. To ensure steady and reliable operation, using three fans in series cooling design, so cooling heat sufficiency to ensure the work stability.
For this item, in the design and production, we are implementing the consistent of policies: the GB9706.1> to guarantee the security.
View Complete Details

LED Light Source

  • External Power Supply 90-264V/AC 50/60 Hz
  • Led power 100w
  • Color temperature 5000K & 6000K
  • Intensity 96, 000Lx
  • Luminous flux 2160Lm
  • Noise less than 55dB
  • Shell temperature less than 55°c
  • Safe type I kind; BF type
  • Max Lumens 6000/-
  • Colour Degree 6000K
  • Input Voltage 14V
  • Max Tip temp 140°c
  • Fan 3 nos.
The Opto LED endoscopy light source has a very high efficiency and a very long life expectancy. It is intended to substitute a 150W or 250W halogen lamp fiber optical illuminator. The unparalleled long life time makes the LED light source the most cost-efficient illuminator, and results in the fact that changing the lamp is never needed.
Extremely high optical output over 6000 lumens for single packageHigh thermal conductivity package junction of heat sink thermal resistance of only 0.96 degree.Four large monolithic chips with uniform emitting area of 36mm.Lumen- maintenance of greater then50, 0001-hours.
View Complete Details

OPTO Fine Bliss LED

  • Objective Lens Oachromatic F -250 Standard (F200 on request)
  • Eyepieces 12.5 X wide field high eye point
  • Focus Through rack and point range 45mm (motorized optional)
  • Weight 70Kg.
  • Type: Galilean
  • Binocular Straight 1180° Tiltable (Optional)
  • Field of view Please refer the table below.
  • Magnification Please refer the table below.
  • Light source Cold light through fiber optic light guide
  • Bulb LED
  • Illumination field ø 53mm 80, 000 lux max. at standard conditions
  • Light intensity built in heat absorbing filter (Blue, Green Optional)
  • Total height (Eyepoint) Max. 1565mm 1 min 1165mm
  • Penta arm adjustment 400mm
  • Penta arm Rotation 0° to 240°
  • Head swivel 0° to 90°
  • Mobility movable on 4 castor wheels
  • Power supply 230v 50Hz single phase AC (110V AC optional)
  • Power consumption 200 watts max
Features
Superior optical quality with cutting edge LED illumination. High resolution and wide field optical system having exceptional depth of field. Sharp 3D image can be observed with high fidelity & Depth. In Built LED Illumination offer low heat generation low power consumption, LED Illumination also guarantees greater contrast and natural color.
Optional Accessories:
Beam Splitter with "C' Mount Endoport Type Beam Splitter
View Complete Details

Ent Treatment Unit

Features-
Noice less and powerful suction.In built LED Endoscopy Light source.Compac t and sleek desing Spraying device with built in automatic microswitch.High resolution Endoscopy camera with LED TV.
Standard equipments-Standard equipment:
Spray gun (Straight 2pcs/bent 1pc) 3pcsSuction gun 1setInbuilt LED Light source.Pre-heater1setSalve pot2setsMedical bottle4setsInstrument tray2setsFiber opticHead LightFiber optic Cable.
Optional Equipments-
Single CCD Endosopy Camera.15 LED TVDoctors chairSinuscope 0 degreeX-Ray view
View Complete Details

A - Scan Machine - US - 1000

  • Display LCD with back light 0.01 mm Resolution
  • Specification  
  • Probe 10 MHZ Solid. light weight with red LED for fixation
  • Tip Radis Dia. 5mm (Concave)
  • Probe Mode Contact, Immersion (Immersion optional)
  • Converted Ultrasonic Velocity Phakic eye 1550 m/s (axial lenght) 1532 m/s (Anterior Chamber & Vitreous Body) 1641 m/s (Lens) Aphakic eye 1532 m/s (axial lenght)
  • Measuring Range Axial lenght 15 - 46 mm
  • Measurement Mode Manual, Semi Automatic, Automatic
  • Eye Modes Phakic, Aphakic, IOL, Dense1, Dense2, Silicon oil
  • Accuracy +/-0.1 mm
  • IOL Formula SRK, SRK II, SRK-T, Blinkhost, Halladay.
  • Printer Built in 3 " Thermal Printer (optional)
  • Input 230 V AC 50Hz (110 V AC, 60Hz on Selected modes)
Features
A compact and light weight US 100 'A' Scan Biometer measures highly accurate axial length with anterior chamber depth, lens thickness and vitreous length of eye.Specially designed software eliminates corneal compression readings.Facility to enter personal contrast and new velocities for new IOL material or silicon filled eyes.Pre defined eye types handles most situations as Phakic, Pseudophakic, semidense, Dense catractAutomatic measurement mode eliminates reqquirments of foot switch for easy operation.Can be upgrades to add Pachymetry.Upgrade of water immersion technique option is available.
View Complete Details

Halogen Light Source

The cold light source contains built in reflector type halogen 150W 250W bulbs which gives cold bright white light. Its features contains built in heat absorbing filter (optional). Light weight toradial transformer to increase life of bulb. Built in 4" fan for better cooling which increases fiber optic cable tip life.

Scan Machine

  • Display LCD with back light 0.01 mm Resolution
  • Probe 10 MHZ Solid. light weight with red LED for fixation
  • Tip Radis Dia. 5mm (Concave)
  • Probe Mode Contact, Immersion (Immersion optional)
  • Measuring Range Axial lenght 15 - 46 mm
  • Measurement Mode Manual, Semi Automatic, Automatic
  • Eye Modes Phakic, Aphakic, IOL, Dense1, Dense2, Silicon oil
  • Accuracy +/-0.1 mm
  • IOL Formula SRK, SRK II, SRK-T, Blinkhost, Halladay.
  • Printer Built in 3 " Thermal Printer (optional)
  • Input 230 V AC 50Hz (110 V AC, 60Hz on Selected modes)
Features
A compact and light weight US 100 'A' Scan Biometer measures highly accurate axial length with anterior chamber depth, lens thickness and vitreous length of eye.Specially designed software eliminates corneal compression readings.Facility to enter personal contrast and new velocities for new IOL material or silicon filled eyes.Pre defined eye types handles most situations as Phakic, Pseudophakic, semidense, Dense catractAutomatic measurement mode eliminates reqquirments of foot switch for easy operation.Can be upgrades to add Pachymetry.Upgrade of water immersion technique option is available.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us