CATV 3Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removing short circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it's transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 1.5dB. (optional 90VAC available.)

Optivision Model no.6061 is an Aluminium optical Node cum power supply with dual benefit inbuilt 

2.5Amp. power Supply with short circuit  & overload protection as supply part. This Optical 

receiver with high-output, high-performance, full-featured CATV optical node designed around 

the very latest optical receiver technology to reliably deliver a full performance of multiplexed 

video. This unit is constructed with high-quality components to enable it to meet or exceed 

its performance specifications over a wide temperature range in an un-control environment.

The unit has Aluminium Extrusion housing for rust-free & good heat dissipation. 

CATV 6Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removing short circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 2.5dB. (optional 60/70/80/90VAC rotary available.)
• Volt & Amp. Meter with 2 Output.

CATV 1Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removing short circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 1.5dB. (optional 90VAC available.)

CATV 10Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removingshort circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 2.5dB. (optional 60/70/80/90VAC rotary available.)

CATV 15Amp. power supply unique model are designed to give 60VAC and full current with built in power inserter, short circuit and over load protection. It has 4 ouput and 1 Input. It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network.This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its longer life.

Specifications:

• Short Circuit Protection via MCB.
• Over Load Protection Via MCB.
• One RF input and Four output.
• RF In/Out 40-860MHz.
• RF In/Out Loss 2.5dB. (optional 90VAC available.)
• Volt & Amp. Meter with 2 Output.

CATV 2Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removing short circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 1.5dB. (optional 90VAC available.)

CATV 3Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removing short circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it's transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 1.5dB. (optional 90VAC available.)

Optivision Model no.6061 is an Aluminium optical Node cum power supply with dual benefit inbuilt 

2.5Amp. power Supply with short circuit  & overload protection as supply part. This Optical 

receiver with high-output, high-performance, full-featured CATV optical node designed around 

the very latest optical receiver technology to reliably deliver a full performance of multiplexed 

video. This unit is constructed with high-quality components to enable it to meet or exceed 

its performance specifications over a wide temperature range in an un-control environment.

The unit has Aluminium Extrusion housing for rust-free & good heat dissipation. 

CATV 6Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removing short circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 2.5dB. (optional 60/70/80/90VAC rotary available.)
• Volt & Amp. Meter with 2 Output.

CATV 1Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removing short circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 1.5dB. (optional 90VAC available.)

CATV 10Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removingshort circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 2.5dB. (optional 60/70/80/90VAC rotary available.)

CATV 15Amp. power supply unique model are designed to give 60VAC and full current with built in power inserter, short circuit and over load protection. It has 4 ouput and 1 Input. It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network.This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its longer life.

Specifications:

• Short Circuit Protection via MCB.
• Over Load Protection Via MCB.
• One RF input and Four output.
• RF In/Out 40-860MHz.
• RF In/Out Loss 2.5dB. (optional 90VAC available.)
• Volt & Amp. Meter with 2 Output.

CATV 2Amp. power supply is unique model & designed to give 60VAC and full current with built in power inserter with short circuit and over load protection & restore after removing short circuit, It can provide power pass 60V through RF coaxial cable to drive CATV amplifier and CATV optical receivers for CATV network. This unit has powder coated housing for rust free and it’s transformer is made by 100% copper for its long life.

Specifications:

• Automatic Short Circuit cut-off.
• Buzzer for short circuit and Over Load.
• Automatic restore after removing short circuit.
• RF In/Out 40-860MHz.
• RF In/Out Loss 1.5dB. (optional 90VAC available.)