Optivision Model no.8081 is 1550nm Filter FTTH (Fiber-to-

the-home)  Optical Receiver with One output. 

It is designed for FTTH purpose and has no power 

required. The FTTH node is constructed with high 

quality components to enable it to meet or exceed 

its performance. The RF output of this FTTH node is 70db @ 0dbm optical input hence it’s work on +2dbm to -7dbm.

There high linearty Photo PIN Diode have high 

performance, for small and Big networks.

Optivision Model no.OV-PLC-A2C 1 x 2 PLC Fiber Splitter, Steel Tube, Bare Fiber 250m, with Connector, Singlemode.Split Input Signal Evenly into 2 Output Ports.

Optivision Model no.1510 is PHILIPS IC based with 1550nm 10dBm 10mw optical Transmitter. This Transmitter is based on

DFB ( distribution feed back ) technology of transmission of optic signal. The Transmitter function in this model is

designed to give 10dBm - 10mw ( butterfly laser) using in control room to give strength of Fiber network. This is

professional Series for small and big networks. The transmission of optic signal at 1550nm for carry multi analog

and digital channels CATV transmission. This Optivision transmitter have AGC & MGC (manual gain control) for easy

to handle RF input signal. The optivision transmitter is constructed with SMD technology to give high quality enable it to meet or exceed its performance. Its is operated with Dual Power Supply and have very low power consumption.

Optivision Model no.9091 is 1310nm FTTH (Fiber-to-

the-home)  Optical Receiver with One output. 

It is designed for FTTH purpose and has no power 

required. The FTTH node is constructed with high 

quality components to enable it to meet or exceed 

its performance. The RF output of this FTTH node is 70db @ 0dbm optical input hence it’s work on +2dbm to -7dbm.

There high linearty Photo PIN Diode have high 

performance, for small and Big networks.

Optivision Model no.9093 is 1310nm FTTH (Fiber-to-

the-home)  Optical Receiver with Three output. 

It is designed for FTTH purpose and has no power 

required. The FTTH node is constructed with high 

quality components to enable it to meet or exceed 

its performance. The RF output of this FTTH node is 66db @ 0dbm optical input hence it’s work on +2dbm to -7dbm.

There high linearty Photo PIN Diode have high 

performance, for small and Big networks.

Optivision Model no.9092 is 1310nm FTTH (Fiber-to-

the-home)  Optical Receiver with Two output. 

It is designed for FTTH purpose and has no power 

required. The FTTH node is constructed with high 

quality components to enable it to meet or exceed 

its performance. The RF output of this FTTH node is 68db @ 0dbm optical input hence it’s work on +2dbm to -7dbm.

There high linearty Photo PIN Diode have high 

performance, for small and Big networks.

Optivision Model no.8081 is 1550nm Filter FTTH (Fiber-to-

the-home)  Optical Receiver with One output. 

It is designed for FTTH purpose and has no power 

required. The FTTH node is constructed with high 

quality components to enable it to meet or exceed 

its performance. The RF output of this FTTH node is 70db @ 0dbm optical input hence it’s work on +2dbm to -7dbm.

There high linearty Photo PIN Diode have high 

performance, for small and Big networks.

Optivision Model no.OV-PLC-A2C 1 x 2 PLC Fiber Splitter, Steel Tube, Bare Fiber 250m, with Connector, Singlemode.Split Input Signal Evenly into 2 Output Ports.

Optivision Model no.1510 is PHILIPS IC based with 1550nm 10dBm 10mw optical Transmitter. This Transmitter is based on

DFB ( distribution feed back ) technology of transmission of optic signal. The Transmitter function in this model is

designed to give 10dBm - 10mw ( butterfly laser) using in control room to give strength of Fiber network. This is

professional Series for small and big networks. The transmission of optic signal at 1550nm for carry multi analog

and digital channels CATV transmission. This Optivision transmitter have AGC & MGC (manual gain control) for easy

to handle RF input signal. The optivision transmitter is constructed with SMD technology to give high quality enable it to meet or exceed its performance. Its is operated with Dual Power Supply and have very low power consumption.

Optivision Model no.9091 is 1310nm FTTH (Fiber-to-

the-home)  Optical Receiver with One output. 

It is designed for FTTH purpose and has no power 

required. The FTTH node is constructed with high 

quality components to enable it to meet or exceed 

its performance. The RF output of this FTTH node is 70db @ 0dbm optical input hence it’s work on +2dbm to -7dbm.

There high linearty Photo PIN Diode have high 

performance, for small and Big networks.

Optivision Model no.9093 is 1310nm FTTH (Fiber-to-

the-home)  Optical Receiver with Three output. 

It is designed for FTTH purpose and has no power 

required. The FTTH node is constructed with high 

quality components to enable it to meet or exceed 

its performance. The RF output of this FTTH node is 66db @ 0dbm optical input hence it’s work on +2dbm to -7dbm.

There high linearty Photo PIN Diode have high 

performance, for small and Big networks.

Optivision Model no.9092 is 1310nm FTTH (Fiber-to-

the-home)  Optical Receiver with Two output. 

It is designed for FTTH purpose and has no power 

required. The FTTH node is constructed with high 

quality components to enable it to meet or exceed 

its performance. The RF output of this FTTH node is 68db @ 0dbm optical input hence it’s work on +2dbm to -7dbm.

There high linearty Photo PIN Diode have high 

performance, for small and Big networks.