We take immense pleasure in bringing forth Karl Fischer Titrator in India. We are counted among the top Karl Fischer Titrator Manufacturers and Suppliers. The Karl Fischer Titrator is known for its high quality and accurate design. We offer Karl Fischer Titrator at a reasonable price. Offered With

• 250ml reaction vessel
• Dual platinum electrode
• Teflon paddle teflon assembly
• Moisture trap for reaction vessel
• 250ml amber reservoir bottle
• Dispensing tube
• Teflon tubing for dispensing path
• Operational & instruction manual
• Manufacturer test certificate
• Warranty card

Salient Features

• Metalic Epoxy Based Powder Coated Body Parallel Port to connect to 80 columns Dot-matrix Printer
• Report Formation as per GLP Compliance
• Built-in Magnetic Stirrer with soft touch Key Speed Controller Automatic end point detection with Audio Alarm
• Over Titer Audio Alarm save KF Reagent Automatic Calculation of Avg. Factor and maximum 10 KF Factor can be stored in memory
• Auto Neutralization reduces the time between analysis & gives accurate results
• Onsite Dispenser Calibration/Validation Facility
• MOC of Dispenser is SS/ABS/Teflon for corrosion protection & maintenance free operation
• In-Built Flushing System for cleaning dispensing path

OverviewGE Analytical Instruments designed the Sievers InnovOx Total Organic Carbon (TOC) Analyzers to provide industry-leading sample handling robustness and instrument uptime for process, environmental, and wastewater organic carbon analysis. Available in bothLaboratory and On-Line models, the InnovOx uses aninnovative Supercritical Water Oxidation technique that offers enhanced eliability, greater ease of use, and lower maintenance than typical combustion or UV persulfate TOC analyzers.

We offer Ultrasonic Bath which is manufactured using foreign technology. The Ultrasonic Bath effectively removes dust, dirt, rust, oil, grease, wax, flux, finger prints, etc. Deep Drawn Tanks are available in models SW 1, 2, 4, 7, 12, 24, & other range of fabricated welded tanks. Apart from Deep Drawing Tanks up to 24 liters, we can supply fabricated tanks of any desired size, capacity, and also any variety of non-standard Ultrasonic Cleaners on request. Principle Of CleaningThe principle of precision cleaning is utilizing ultrasonic agitation of specific liquid by vibrations created from ultra high frequency is called ultrasonic whenever this ultrasonic energy is transferred to a cleaning liquid. Rapid formation and collapse of millions of microscopic bubbles throughout the liquid occurs which causes intense scrubbing effect. This phenomenon is called Cavitation. In a very short time, it removes all dirt & foreign bodies from components which are immersed in the cleaning liquid. The ultrasonic energy is produced by converting electrical energy into mechanical vibrations by using generator and piezo-electric transducers. Standard Model : Up to 105 L Optional Accessories : Basket, Heater, Timer, etc. Features

• Compact design with in-built Generator & Solid State Circuitry
• Uniform cavitations throughout the tank
• Specially designed conical transducers
• Imported adhesive, cured at higher temperature
• Longer bonding life, better cavitation, & transfer of liquid
• Unique auto tuning feature
• 30/40 khz frequency for effective cleaning
• Low noise level

Application Areas

• Surgical
• Dental clinics
• Ophalmology
• Jewellery
• Watech parts
• Pharmaceutical
• Paint shop
• Automobile
• Electronics
• Textile
• Machine tools
• Instrumentation
• Electroplating
• Petrochemical unit
• Analytical lab
• Glassware

Salient Features

• Easy to operate & made of one piece S. S. Tank
• Indigenously manufactured with advanced MOSFET technology, with Auto-tuning facility
• Compact, rugged and highly durable systems
• Extensively protected electronic circuits means longer and safer operations
• Digital tuning of Transducers with Generators to avoid any frequency shifted even during demanding applications

Technical Features

• Operating frequency 33+-3KHz, for all general purpose cleaning is highly recommended
• Input Voltage range of 170V AC - 270V AC, 50Hz, 1Ph
• Micro Controller based timer range 0 to 30/99 minutes
• Thermostatic controlled temperature controller

Specifications

Ultrasonic Cleaner		Deep Drawn Tanks						Fabricated Tanks
Model		SW-1	SW-2	SW-4	SW-7	SW12	SW-24	SW-45	SW-65	SW-105
Tank size in mm	L	153	238	238	300	300	500	500	500	600
	W	14	136	136	150	138	300	300	300	400
	H	65	100	150	200	200	150	300	450	450
Liquid level in mm		50	90	140	185	185	130	250	400	400
Tank volume in lrs		1	2	4	7	12	20	45	65	105
Ultrasonic cap in wait		50	100	150	150	300	300	600	600	900
Heater capa in watt			500w	500w	960w	960w	1500	2000	4500	5500
Drain valve		Available with fabricated tank only							1	1
Mains supply		220Vac, 50hz							415 vAC, 50 Hz
Ultrasonic frequency		37+3					27+3		37+3
Overall dimensions in mm(Approx.)	L	180	300	300	355	335	590	600	660	760
	W	165	165	200	305	275	325	400	500	600
	H	250	300	300	375	400	370	500	850	900

Technical Specifications

Capacity	Tank Size (LxBxH)mm	Overall Dimension (LxBxH)mm	Wattage
1.5Lit	240x135x65	265x160x180	60W
3.5Lit	300x150x100	330x175x250	120W
6.5Lit	300x150x150	450x200x350	200W
9Lit	300x200x150	450x300x375	250W

Note : Higher capacity other than mentioned is also available as per customer requirement

We take immense pleasure in bringing forth Karl Fischer Titrator in India. We are counted among the top Karl Fischer Titrator Manufacturers and Suppliers. The Karl Fischer Titrator is known for its high quality and accurate design. We offer Karl Fischer Titrator at a reasonable price. Offered With

• 250ml reaction vessel
• Dual platinum electrode
• Teflon paddle teflon assembly
• Moisture trap for reaction vessel
• 250ml amber reservoir bottle
• Dispensing tube
• Teflon tubing for dispensing path
• Operational & instruction manual
• Manufacturer test certificate
• Warranty card

Salient Features

• Metalic Epoxy Based Powder Coated Body Parallel Port to connect to 80 columns Dot-matrix Printer
• Report Formation as per GLP Compliance
• Built-in Magnetic Stirrer with soft touch Key Speed Controller Automatic end point detection with Audio Alarm
• Over Titer Audio Alarm save KF Reagent Automatic Calculation of Avg. Factor and maximum 10 KF Factor can be stored in memory
• Auto Neutralization reduces the time between analysis & gives accurate results
• Onsite Dispenser Calibration/Validation Facility
• MOC of Dispenser is SS/ABS/Teflon for corrosion protection & maintenance free operation
• In-Built Flushing System for cleaning dispensing path

OverviewGE Analytical Instruments designed the Sievers InnovOx Total Organic Carbon (TOC) Analyzers to provide industry-leading sample handling robustness and instrument uptime for process, environmental, and wastewater organic carbon analysis. Available in bothLaboratory and On-Line models, the InnovOx uses aninnovative Supercritical Water Oxidation technique that offers enhanced eliability, greater ease of use, and lower maintenance than typical combustion or UV persulfate TOC analyzers.

We offer Ultrasonic Bath which is manufactured using foreign technology. The Ultrasonic Bath effectively removes dust, dirt, rust, oil, grease, wax, flux, finger prints, etc. Deep Drawn Tanks are available in models SW 1, 2, 4, 7, 12, 24, & other range of fabricated welded tanks. Apart from Deep Drawing Tanks up to 24 liters, we can supply fabricated tanks of any desired size, capacity, and also any variety of non-standard Ultrasonic Cleaners on request. Principle Of CleaningThe principle of precision cleaning is utilizing ultrasonic agitation of specific liquid by vibrations created from ultra high frequency is called ultrasonic whenever this ultrasonic energy is transferred to a cleaning liquid. Rapid formation and collapse of millions of microscopic bubbles throughout the liquid occurs which causes intense scrubbing effect. This phenomenon is called Cavitation. In a very short time, it removes all dirt & foreign bodies from components which are immersed in the cleaning liquid. The ultrasonic energy is produced by converting electrical energy into mechanical vibrations by using generator and piezo-electric transducers. Standard Model : Up to 105 L Optional Accessories : Basket, Heater, Timer, etc. Features

• Compact design with in-built Generator & Solid State Circuitry
• Uniform cavitations throughout the tank
• Specially designed conical transducers
• Imported adhesive, cured at higher temperature
• Longer bonding life, better cavitation, & transfer of liquid
• Unique auto tuning feature
• 30/40 khz frequency for effective cleaning
• Low noise level

Application Areas

• Surgical
• Dental clinics
• Ophalmology
• Jewellery
• Watech parts
• Pharmaceutical
• Paint shop
• Automobile
• Electronics
• Textile
• Machine tools
• Instrumentation
• Electroplating
• Petrochemical unit
• Analytical lab
• Glassware

Salient Features

• Easy to operate & made of one piece S. S. Tank
• Indigenously manufactured with advanced MOSFET technology, with Auto-tuning facility
• Compact, rugged and highly durable systems
• Extensively protected electronic circuits means longer and safer operations
• Digital tuning of Transducers with Generators to avoid any frequency shifted even during demanding applications

Technical Features

• Operating frequency 33+-3KHz, for all general purpose cleaning is highly recommended
• Input Voltage range of 170V AC - 270V AC, 50Hz, 1Ph
• Micro Controller based timer range 0 to 30/99 minutes
• Thermostatic controlled temperature controller

Specifications

Ultrasonic Cleaner		Deep Drawn Tanks						Fabricated Tanks
Model		SW-1	SW-2	SW-4	SW-7	SW12	SW-24	SW-45	SW-65	SW-105
Tank size in mm	L	153	238	238	300	300	500	500	500	600
	W	14	136	136	150	138	300	300	300	400
	H	65	100	150	200	200	150	300	450	450
Liquid level in mm		50	90	140	185	185	130	250	400	400
Tank volume in lrs		1	2	4	7	12	20	45	65	105
Ultrasonic cap in wait		50	100	150	150	300	300	600	600	900
Heater capa in watt			500w	500w	960w	960w	1500	2000	4500	5500
Drain valve		Available with fabricated tank only							1	1
Mains supply		220Vac, 50hz							415 vAC, 50 Hz
Ultrasonic frequency		37+3					27+3		37+3
Overall dimensions in mm(Approx.)	L	180	300	300	355	335	590	600	660	760
	W	165	165	200	305	275	325	400	500	600
	H	250	300	300	375	400	370	500	850	900

Technical Specifications

Capacity	Tank Size (LxBxH)mm	Overall Dimension (LxBxH)mm	Wattage
1.5Lit	240x135x65	265x160x180	60W
3.5Lit	300x150x100	330x175x250	120W
6.5Lit	300x150x150	450x200x350	200W
9Lit	300x200x150	450x300x375	250W

Note : Higher capacity other than mentioned is also available as per customer requirement