Optiflex Industries

Sarkhej, Ahmedabad, Gujarat

Submersible pump winding wire suitable to use from -15c to +70c rated conductor temperature. The high speed & fully synchronized extrusion process with automatic on-line controls gives consistence high quality wire insulation.The conductor is composed of high purity, bright annealed bare electrolytic grade copper wires complying to IS 8130:1984, which are drawn, annealed and bunched in high precision machines geometrically and appropriately to ensure apposite flexibility, uniform resistance and proper dimension.

PVC Insulated Copper Conductor Single core (Unsheathed) Cables in Voltage Grade up to and including 1100 V & generally conforming to IS 694 : 1990

Conductor:

The conductor is composed of high purity, bright annealed bare electrolytic grade copper wires complying to IS 8130:1984, which are drawn, annealed and bunched in high precision machines geometrically and appropriately to ensure apposite flexibility, uniform resistance and proper dimension.

Insulation:

The bunch copper is insulated with a specially formulated PVC compound having high insulation resistance and dielectric strength and conforming to the requirements of Type A of IS 5831:1984 & also suitable to use from -15c to +70c rated conductor temperature. The high speed & fully synchronized extrusion process with automatic on-line controls gives consistence high quality wire insulation.

Improved Fire Performance Category C1:

Wires are also available with following Fire Retardant properties. Specially formulated FR PVC Compound ensures additional safety against the fires because of its high Oxygen and Temperature index properties.

Colours:

Red, Yellow, Blue, Black, Green, Grey, etc.

Marking:

Continuous print of Brand name, cable size, voltage grade, etc. through out the wire length.

Packing:

Wires are avalible in 90 mtrs coils packed in protective cartons. Wire coils are also available in 100 mtrs., 180 mtrs or as per mutually agreed packing length with the customer.

Approvals:

"OPTICAB" Single Core PVC Insulated Wires are tested and approved by some of the most prestigious testing laboratories like ERDA (Vadodara) and DTH (New Delhi).

Applications:

"OPTICAB" Single Core PVC Insulated Wires can be used in to the electrical wiring for Houses, Buildings, Hospitals, Industries, Panels etc.

All information and details given herein is in good faith & are for general reference purpose only and should not be taken as firm specification. Optiflex Industries shall not own the responsibility for any consequential damage incurred due to any action or decision based on above information/details or due to incorrect use or interpretation.

Additional FR Properties:

Motor winding wire are drawn, annealed and bunched in high precision machines geometrically and appropriately to ensure apposite flexibility, uniform resistance and proper dimension.The bunch copper is insulated with a specially formulated PVC compound having high insulation resistance and dielectric strength and conforming to the requirements of Type A of IS 5831:1984 & also suitable to use from -15c to +70c rated conductor temperature. The high speed & fully synchronized extrusion process with automatic on-line controls gives consistence high quality wire insulation.

PVC Insulated & Sheathed Copper Conductor 3 core Flat Cables in Voltage Grade up to and including 1100 V & Generally conforming to IS 694 : 1990.

Conductor:

The conductor is composed of high purity, bright annealed bare electrolytic grade copper wires complying to IS 8130:1984, which are drawn, annealed and bunched in high precision machines geometrically and appropriately to ensure apposite flexibility, uniform resistance and proper dimension.

Insulation:

The bunch copper is insulated with a specially formulated PVC compound having high insulation resistance and dielectric strength and conforming to the requirements of Type A of IS 5831:1984 & also suitable to use from -15c to +70c rated conductor temperature. The high speed & fully synchronized extrusion process with automatic on-line controls gives consistence high quality wire insulation.

Sheath:

Special grade of abrasion resistant PVC compound confirming to the requirements of Type ST 1 of IS 5831:1984 is used as outer sheath and applied over the insulated laid up cores is suitable for outdoor uses & impermeable to water, grease, oil, etc.

Colours:

Insulation -Red, Yellow, Blue

Sheath Black, Blue or as per customer's requirement.

Marking:

The high speed printer ensures continuous print of Brand name, cable size, voltage grade, sequential marking, etc. through out the cable length.

Packing:

The Flat Cables are available in wooden drums and in Coil form of different sizes.

HP v/s Current:

The full load currant for submersible pump motors, 3 phases, 50 cycles.415 425 V.

The bunch copper is insulated with a specially formulated PVC compound having high insulation resistance and dielectric strength and conforming to the requirements of Type A of IS 5831:1984 & also suitable to use from -15c to +70c rated conductor temperature. The high speed & fully synchronized extrusion process with automatic on-line controls gives consistence high quality wire insulation.

We have been appraised and appreciated also by some of the most preeminent Certification & Credit Rating bodies for Product Quality, Management System, Performance Capabilities and Financial Strength, and are instrumental to make OPTIFLEX - the Unique and the Prominent Brand in the industry.

Plastic insulated cable are for general reference purpose only and should not be taken as firm specification. Optiflex Industries shall not own the responsibility for any consequential damage incurred due to any action or decision based on above informationdetails or due to incorrect use or interpretation.

Insulated (Tape Wrapped) Winding Wires with bright annealed round solid bare copper conductor For Submersible Motors:

Salient Features:

• Superior EC grade bright annealed bare copper conductor.
• Hi-quality, Hi-performance polymer film insulation.
• Excellent electro-mechanical properties.
• Indigenous controlled production process.

All information and details given herein is in good faith & are for general reference purpose only and should not be taken as firm specification. Optiflex Industries shall not own the responsibility for any consequential damage incurred due to any action or decision based on above information/details or due to incorrect use or interpretation.

All information and details given herein is in good faith & are for general reference purpose only and should not be taken as firm specification. Optiflex Industries shall not own the responsibility for any consequential damage incurred due to any action or decision based on above informationdetails or due to incorrect use or interpretation.Superior EC grade bright annealed bare copper conductor.