FEATURES * The Digital Stroboscope is used the microprocessor Power Supply 110 Vac 10%, 50/60 Hz. circuit design, high accuracy, digital readout, light duty, or that is ideal for inspecting and measuring the speed of 220 Vac 10%, 50/60 Hz. moving gears, fans, centrifuges, pumps, motors and or other equipment used in general industrial 230 Vac 10%, 50/60 Hz. maintenance, production, quality control, laboratories * A " Voltage rating label " and as well as for schools and colleges for is affixed under the bottom demonstrating strobe action. case to show the voltage * Digital synthesis circuit, high stability and high adjusting rating of power supply. resolution, easy operation. When use the stroboscope, * Crystal time base to offer high accuracy measurement & make sure to identify the fast measuring time. power supply voltage * Xenon flash tube, high intensity. exactly. * Wide range : 60 to 30, 000 RPM. Circuit * Microcomputer LSI circuit & crystal * Red LED display, easy to read. control time base. * Adjustment resolution : 0.1 RPM ( < 1, 000 RPM ), * Digital synthesis circuit for the 1 RPM ( 1, 000 RPM ). signal adjusting. * High intensity light. Operating Temp. 0 to 50 (32 to 122 ). * Setting buttons : Digital adjust button, x 2 button, Operating Less than 80% R.H. 2 button, + button, - button, easy operating. Humidity * Xenon flash tube with plug and socket, easy to make Dimension 21 x 12 x 12 cm (8.3 x 4.8 x 4.8 inch). the tube replacement. Weight 1Kg/2.2 LB. * Compact and heavy duty housing case. Housing Compact and impact plastic injection case with plastic mirror type reflector. GENERAL SPECIFICATION Calibration Crystal time base and microprocessor Display 14 mm(0.56") LED, 5 digits. circuit, don't necessary take any Flash adjust 60 to 30, 000 RPM/FPM. external calibration process. range * RPM : round per minute. Accessories Operation manual.1 PC. * FPM : flash per minute. Included Power cable.1 PC. Resolution 0.1 RPM : < 1, 000 RPM. FLASH TUBE SPECIFICATION 1 RPM : Flash tube Xenon lamp. 1, 000 RPM Flash Duration Approximately 60 to 1, 000 Function Digital rotate knob, microseconds. buttons x 2 button, 2 button, Flash color Temp. Xenon white 6, 500 K degree. + button, - button, Flash energy 4 Watts-seconds (joules). Accuracy (0.05 % + 1d) Beam Angle 80 degrees. * Spec. tested under the environment Flash tube It is required to change the flash tube RF Field Strength less than 3 V/M & replacement when the instrument start to flash frequency less than the 30 MHz only. irregularly at speeds > 3600 RPM/FPM. Signal The signal adjusting circuit is used the Operating duty For prolong life and safety, please Stability digital synthesis circuit, the output Cycle adhere to the following operation duty signal will existing high stability and cycle: < 2000 RPM - 2 hours not change. 2001 to 3600 RPM - one hour Power Less than 30 Watt. 3601 to 8000 RPM - 30 minutes

Vibration Signatures are potent enough to provide great information in reference to the various condition prevailing within different components at the machine under Test.

The vibration meter was able to indicate overall (averaged or peaked) vibration levels and thereby provided a screening check on machine. Vibration Analysers go a step further and provide information on contiribution of vibrations generated by all the components that constitute the machine. They are able to break up the waveform of signatures detected into the signatures from different sources. It is therefore possible to identify severity of vibration being generated from each component of machine.

Vibration Data Collectors are mainly used for automating the data collection process. These are capable of following a route for data collection which is created in supporting software, from where it is uploaded into the instrument. After the completion of data capturing activity, new data can be downloaded into the same software. Usually, the software has the ability to store and trend the data for the past and future time period.

We usually partner with the user in finding best possible analysing/data collecting hardware and software for his application. However, we exclusively support industry's best analysers, data collectors and condition monitoring software.

This is our industry-standard Vibration Meter for assessment of machinery vibration, with digital display for spot measurement of Vibration in Acceleration/ Velocity/ Displacement/ Bearing Spike. Suitable for overall Vibration Severity Assessment. Supplied with a rechargeable battery.

These sound level meters are General Purpose Sound Level Meters with digital display for spot measurement of SPL in dB(A-weighted) units. These instruments are Type-2 accuracy instruments as per IS9779:1980 with Calibration traceable to NPL, New Delhi.

FEATURES * Professional light meter. * Light sensor used the exclusive photo diode & color correction filter spectrum meet C.I.E. photopic. * Sensor cosine correction factor meet standard. * Separate Light Sensor allows user to measure the light at an optimum position. * All the function keys are used rubber push button, * High accuracy in measuring. * Water resistance front panel * External zero adjustment. * LSI circuit provides high reliability and durability. * Data hold. * Large LCD display allows clear readout-out even at high ambient light level. * Compact size and excellent operation. * Built-in low battery indicator.

FEATURES * The Digital Stroboscope is used the microprocessor Power Supply 110 Vac 10%, 50/60 Hz. circuit design, high accuracy, digital readout, light duty, or that is ideal for inspecting and measuring the speed of 220 Vac 10%, 50/60 Hz. moving gears, fans, centrifuges, pumps, motors and or other equipment used in general industrial 230 Vac 10%, 50/60 Hz. maintenance, production, quality control, laboratories * A " Voltage rating label " and as well as for schools and colleges for is affixed under the bottom demonstrating strobe action. case to show the voltage * Digital synthesis circuit, high stability and high adjusting rating of power supply. resolution, easy operation. When use the stroboscope, * Crystal time base to offer high accuracy measurement & make sure to identify the fast measuring time. power supply voltage * Xenon flash tube, high intensity. exactly. * Wide range : 60 to 30, 000 RPM. Circuit * Microcomputer LSI circuit & crystal * Red LED display, easy to read. control time base. * Adjustment resolution : 0.1 RPM ( < 1, 000 RPM ), * Digital synthesis circuit for the 1 RPM ( 1, 000 RPM ). signal adjusting. * High intensity light. Operating Temp. 0 to 50 (32 to 122 ). * Setting buttons : Digital adjust button, x 2 button, Operating Less than 80% R.H. 2 button, + button, - button, easy operating. Humidity * Xenon flash tube with plug and socket, easy to make Dimension 21 x 12 x 12 cm (8.3 x 4.8 x 4.8 inch). the tube replacement. Weight 1Kg/2.2 LB. * Compact and heavy duty housing case. Housing Compact and impact plastic injection case with plastic mirror type reflector. GENERAL SPECIFICATION Calibration Crystal time base and microprocessor Display 14 mm(0.56") LED, 5 digits. circuit, don't necessary take any Flash adjust 60 to 30, 000 RPM/FPM. external calibration process. range * RPM : round per minute. Accessories Operation manual.1 PC. * FPM : flash per minute. Included Power cable.1 PC. Resolution 0.1 RPM : < 1, 000 RPM. FLASH TUBE SPECIFICATION 1 RPM : Flash tube Xenon lamp. 1, 000 RPM Flash Duration Approximately 60 to 1, 000 Function Digital rotate knob, microseconds. buttons x 2 button, 2 button, Flash color Temp. Xenon white 6, 500 K degree. + button, - button, Flash energy 4 Watts-seconds (joules). Accuracy (0.05 % + 1d) Beam Angle 80 degrees. * Spec. tested under the environment Flash tube It is required to change the flash tube RF Field Strength less than 3 V/M & replacement when the instrument start to flash frequency less than the 30 MHz only. irregularly at speeds > 3600 RPM/FPM. Signal The signal adjusting circuit is used the Operating duty For prolong life and safety, please Stability digital synthesis circuit, the output Cycle adhere to the following operation duty signal will existing high stability and cycle: < 2000 RPM - 2 hours not change. 2001 to 3600 RPM - one hour Power Less than 30 Watt. 3601 to 8000 RPM - 30 minutes

Vibration Signatures are potent enough to provide great information in reference to the various condition prevailing within different components at the machine under Test.

The vibration meter was able to indicate overall (averaged or peaked) vibration levels and thereby provided a screening check on machine. Vibration Analysers go a step further and provide information on contiribution of vibrations generated by all the components that constitute the machine. They are able to break up the waveform of signatures detected into the signatures from different sources. It is therefore possible to identify severity of vibration being generated from each component of machine.

Vibration Data Collectors are mainly used for automating the data collection process. These are capable of following a route for data collection which is created in supporting software, from where it is uploaded into the instrument. After the completion of data capturing activity, new data can be downloaded into the same software. Usually, the software has the ability to store and trend the data for the past and future time period.

We usually partner with the user in finding best possible analysing/data collecting hardware and software for his application. However, we exclusively support industry's best analysers, data collectors and condition monitoring software.

This is our industry-standard Vibration Meter for assessment of machinery vibration, with digital display for spot measurement of Vibration in Acceleration/ Velocity/ Displacement/ Bearing Spike. Suitable for overall Vibration Severity Assessment. Supplied with a rechargeable battery.

These sound level meters are General Purpose Sound Level Meters with digital display for spot measurement of SPL in dB(A-weighted) units. These instruments are Type-2 accuracy instruments as per IS9779:1980 with Calibration traceable to NPL, New Delhi.

FEATURES * Professional light meter. * Light sensor used the exclusive photo diode & color correction filter spectrum meet C.I.E. photopic. * Sensor cosine correction factor meet standard. * Separate Light Sensor allows user to measure the light at an optimum position. * All the function keys are used rubber push button, * High accuracy in measuring. * Water resistance front panel * External zero adjustment. * LSI circuit provides high reliability and durability. * Data hold. * Large LCD display allows clear readout-out even at high ambient light level. * Compact size and excellent operation. * Built-in low battery indicator.