Our Products
Water Treatment & Purification Plant
2 Products availableCooling Tower Parts
2 Products availableIndustrial Plastic Pipes
2 Products availableCooling Tower
2 Products availableFabric
1 Products availableBarrels
1 Products availablePlastic Crates
1 Products availableEffluent Treatment Plants or (ETP) are used by most of the companies in various industries to clean water and remove any toxic and non-toxic materials or chemicals from it so that that water can be reused or released in the environment which will do less harm to the environment.
we are offering Effluent Treatment Plant which prevents extra usage of water during processing. The offered treatment plant is utilized for removing organics, chlorine and other dissolved matter from water. Effluent Treatment Plant is widely appreciated among clients' and is available in various specifications as per requirements of our renowned customers. Our quality controllers monitor the entire manufacturing process to ensure flawlessness in offered products.
Centrifugal pumps are commonly used for pumping water, solvents, organics, oils, acids, bases and any 'thin' liquids in both industrial, agricultural and domestic applications. In fact, there is a design of centrifugal pump suitable for virtually any application involving low viscosity fluids.
They are designed to move water from underground wells or reservoirs and are commonly used around clean water applications that require high-pressure and high-head applications but have a wide range of these pumps for many industries and applications.
FRP (Fibreglass Reinforced Plastics, also known as GRP, or Glass Reinforced Plastics) is a modern composite material of construction for chemical plant equipment like tanks and vessels. Chemical equipment that range in size from less than a metre to 20 metres are fabricated using FRP as material of construction.
SPIRAL PE Tanks are innovative thermoplastic static non-pressurized storage vessels and have been serving the needs for liquid storage in the housing as well as industrial sector.
The forced draft cooling towers remove low-potential heat generated in the production process. They use atmospheric cooling with wet technology and forced draft. A counterflow of air and hot water in the cooling fill results in a heat transfer.
Locker offers a wide range of industrial flooring products and solutions, including fibreglass reinforced plastic grating. This product brochure provides in=depth information about Locker's FRP grating, including a load table and a chemical resistance table.
FRP pultruded gratings are highly used in offshore rig plants, power plants, oil and gas industry and in various architectural structures. FRP heavy duty gratings are suited for water treatment plants, food industries, chemical factories, and more.
A tumbling machine is a durable deburring and metal-polishing machine designed for finishing large parts or batches of smaller parts. A tumbling machine is also known as a barreling machine or a mass-finishing machine.
Cooling tower sprinkler head is a device mounted on top of the stand pipe together with the sprinkler pipes on the cooling tower. Through circulating water in the tower, the sprinkler, mainly through its head, is rotated by its pressure.
The natural draft cooling tower is an open, direct-contact system. It works using a heat exchanger, allowing hot water from the system to be cooled through direct contact with fresh air. To increase the heat transfer surface area (and optimize the cooling process), hot water is sprayed from nozzles within the tower.
A skimmer is a device for recovering spilled oil from the water's surface. Skimmers may be self-propelled, used from shore, or operated from vessels. The efficiency of skimmers is highly dependent upon conditions at sea. In moderately rough or choppy water, skimmers tend to recover more water than oil.
We are renowned Manufacturer and Supplier of PP FRP Blower, FRP Blower, PP Blowers in India. PP FRP Blower has a dynamic impeller with mounted stand in order to manage corrosive & abrasive liquids. This PP FRP Blower is widely accessible in different sizes and models with well-equipped quality & machinery. These products are supplied in a state-of-art infrastructure unit with accuracy with the support of latest machinery. More, these products are obtainable in many capacities and are used for various industrial applications.
Electroplating Drier Unit Our unique touch & wipe system provides extra cool contacts and reduces any dirt impediment for uninterrupted plating. Conventional contacts are available such as the standard "horn and vee" set-up, endbar or bell-and-wedge. End plate contacts are also available.
These materials include nylon, polypropylene, polyester, porous PTFE film and other fluoropolymers, viscose, aromatic polyamides, felts and woven wool. The development of seamless bags in these various materials has helped to maintain the popularity and ubiquity of liquid bag filters.
In general, an acid-proof brick should exhibit a high degree of acid resistance, have a high density, high resistance to abrasion and high compressive strength. Brick work that is exposed to temperature changes must be built of bricks that are able to withstand such stresses and strains.
Acid brick or acid resistant brick is a specially made form of masonry brick that is chemically resistant and thermally durable. Acid brick is created from high silica shale and fired at higher temperatures than those used for conventional brick.
We are into manufacturing of water cooling towers. Cooling towers are primarily used for heating, ventilation, and air conditioning (HVAC) and industrial purposes. Cooling towers provide a cost-effective and energy efficient operation of systems in need of cooling. More than 1, 500 industrial facilities use large quantities of water to cool their plants 2.
Cooling towers are essentially large boxes designed to maximize evaporation of water. To do this, they contain material, typically PVC plastic sheets, that create large surface areas for water evaporation to occur. This material is what fills the inside of the cooling tower and is called "Cooling Tower Fill".
PPCH – Pneumatic pipes with triple layer for compressed air conveying under pressure. UV Stabilized top layer for long term durability and enhanced life Glass Fibre Reinforced composite middle layer leads to high resistance against thermal expansion, high impact and very low sagging. Inner smooth surface with RS value of 0.1 micron leads to very low friction loss and higher air flow compared to metal pipe. Designed for air compressor line having socket fusion system which gives 100% leak proof and more energy saving. Variety of flame retardant additives deployed to reduce flame spread, heat release, smoke & fume generation Ideal for air piping use in mines and allied industries.
PVC strip curtains, also known as strip curtains or strip doors, are a great way to limit the movement of contaminants or pests in your premises. They're also very good at preventing heat loss or cold loss from controlled temperature environments.
Our range comprises Sliding PVC Strip Curtains that find their application in closing door openings of any size. These PVC strip curtains are widely demanded, owing to their compliance with international quality norms.
The term "sewage treatment plant" (STP) (or "sewage treatment works" in some countries) is nowadays often replaced with the term wastewater treatment plant (WWTP). Strictly speaking, the latter is a broader term that can also refer to industrial wastewater.
Sewage treatment plants process and treat wastewater/sewage, breaking it down into a cleaner 'effluent' that can be returned back to nature in a safer, eco-friendly form. They help restore groundwater balance, curb diseases and stop degradation and pollution of the environment.
High density polyethylene (HDPE) piping systems have been used for municipal and industrial water applications for over 50 years. Within PPI's Building & Construction Division, HDPE pipes are used for ground source geothermal applications, also known as earth energy or geoexchange systems.
HDPE piping is mainly used for conveying fluid as well gas at low temperatures. This includes hazardous wastes, slurry, and also stormwater. This is why HDPE has a distinguished and long service history in the oil, mining, gas, and water industries, among others.
FRP Lining is resin lining to raise durability and safety by lining inside of concrete tank with FRP (Fiberglass Reinforced Plastics). It provides strength and is not affected by structural cracks which occur on the concrete tank.
Fiberglass Reinforced Plastic is a corrosion resistant lining material used to suit specific working conditions with reference to temperature, concentration of the product handled and the type of material being used. Various grades of Resins viz. Isophthalic, Bisphenol, Vinyl Ester & Epoxy etc.
HDPE Crates / Plastic Crates are used for storage of various goods and for shipping from one location to another. The goods are positioned in a crate, with or without cover, and set or stacked onto a pallet loaded onto a transportation vehicle such as truck or train car and shipped to its destination.
We are providing High Quality HDPE Crates / Plastic Crates at reasonable price in Wholesale / Bulk orders.
The Polypropylene pleated filter cartridge or PP Filter Cartridge is constructed with a high surface area melt-blown polypropylene media for low initial pressure drop, high dirt holding capacity, and high-efficiency performance.
Natural, unpigmented, virgin polypropylene designed specifically for ultra-pure water. Our Polypropylene True Blue Ball Valves provide a cost-effective option for ultra-pure water handling applications.
As the name implies, plastic pipes are made of plastic materials. Due to many advantages, plastic pipes are ideal choice in many piping and plumbing solutions. In fighting corrosion, plastic pipes are an important alternative.
“PP” stands for “polypropylene” and “polypropene”; “HDPE” stands for “high-density polyethylene.” 2.It is made from propylene; HDPE is made from petroleum. 3. The crystallinity of PP is less than HDPE.
HDPE sheet is commonly used to create surfaces in food service areas. This can include countertops as well as cutting boards. It does not dull knives, which is critical in busy commercial settings and is compliant with al USDA and FDA regulations.
The polypropylene plastic rod is easy to weld using thermoplastic welding equipment, and it is also often fabricated into water and chemical tanks. Some of the applications for the polypropylene plastic rod include rigid outer prosthetic sockets and also in lower and upper extremity orthoses.
Acid resistant lining materials are coatings that protect concrete, plastic piping, fiber glass, and steel structures against strong acids, solvents, and alkalis. They are employed in several end-use industries, wherein floors, walls, and equipment are constantly exposed to strong chemicals and acids.
Aluminum-plastic composite pipes can operate and can be used in high operating temperatures of up to 110 degrees Celsius making them perfect to be used in high temperature environments like hot water supply and water heating systems.
The principle of operation of cooling tower fill is to put as much water surface area in contact with as much air as possible, for the longest amount of time possible. Film fills allow the water to form thin flowing sheets to expose as much water surface area as possible to the interacting flow.
FRP (Fibreglass Reinforced Plastics, also known as GRP, or Glass Reinforced Plastics) is a modern composite material of construction for chemical plant equipment like tanks and vessels. Chemical equipment that range in size from less than a metre to 20 metres are fabricated using FRP as material of construction.