Omegga Power Industry Private Limited

Rani Jhansi Road, Delhi

Tool for clamping the conductor during pulling and sagging operation. The clamp is suitable to grip specific ACSR conductor. The body of the clamp is fabricated from high tensile steel. The two halves are hinged to each other on one side and the other side High tensile bolts are provided along with the nuts. The clamps are provided with replaceable aluminium liner in order to avoid damage to conductor surface and are circular in shape so as to accommodate the conductor without causing any deformation to its shape. The Nuts provided to the eye bolts are of extra long size to facilitate better tightening along with extra thick WasherTechnical Specification:

• Body: Made of Steel in two Parts.
• Sleeve: Alloy Aluminum Liners Provided to Grip Conductor.
• Hook and Eye Bolts made of Carbon Steel.

The pulleys are sutable for stringing Four bundled conductor lines Four sheave are made of aluminium alloy, mounted on the ball bearings and cover with neoprene rubber ring The Centre sheave is made of MS, mounted on the ball bearings. Technical Specification:

• The frame are made of Mild Steel
• For 800mm : Sheave dimension( Outside diameter x root diameter x sheave width ) 800 x 688 x 120 mm
• for 660mm : Sheave dimension( Outside diameter x root diameter x sheave width ) 660 x 543 x 120 mm

This Tool is used for clamping the Conductor/Earthwire drums and capable to lift & hold in position the wooden/steel conductor/Earthwire drums having diameter of 2000mm and width of 1000mm. The clamping jaw are provided with tapered bushes to compensate for any difference in the bore size of the drum. Breaking arrangement is provided to the clamping jaws to hold the drum in position, whenever required. The clamping jaws are provided with auxiliary pointed screws to ensure positive griping action of the drum. The stand legs & base are made of heavy duty MS Pipe/Channel . The base frame is collapsible type for light weight and easy transportation. The Jack unit have Hydraulic mechanism consisting of mono block type with built-in hand operated pump unit having both arm individual cylinder control to facilitate in leveling both sided and thus keeping the drum in proper horizontal position while lifting. The braking arrangement provided.
Technical Specification

• Suitable for paying out cables during stringing conductors operations
• Tubolar steel construction with a protective coating
• Reel lifting by hydraulic jack.
• Disc brakes with interchangeables pads
• Support with oscillating shielded ball-bearings
• The frame is completely detachable to reduce dimensions during transport.
• Drum lifting jack suitable for Dia 2000mm and 1000mm width
• Weight: 415 Kg

PLC machine control with CAN-bus technology Large display to indicate all machine data Error diagnosis, language selection, maintenance data, intelligent engine management.

To Tighten wire cable and stranded wire etc. The turn buckle have eye type hooks at both ends made of steel. The screw rod have locking arrangement so that it will not come out after it is fully opened.

Single Conductor Wire is specifically designed to connect the Pulling Rope with a fibre optic cable. They are composed of several jointed rods and two drawback counterweights.

Technical specification:

• Non Rotating Counterweight Device for Stringing O.P.G.W Cables
• Specify Designed to connect the Pulling Rope with a Fiber Optic Cable.
• They are composed of several jointed rods.
• Safe working Load : 5 Ton

Hydraulic Press of 100 Tons Compressive capacity, suitable for compression of joints on Conductor and Steel Ropes for High Voltage Electric lines. The Pressing Cycle has been improved by two-stage Hand Pump.

Technical Specification

• To Compress Conductor, earthwire and aluminium terminal.
• Two-stage hand pump with safety valve & pressure gauge
• Max. pressing force 100 Tons , 150 Tons
• Max. oil pressure : 700 bar
• Oil delivery volume per pumping :
• 1st stage : 6.25 cm3
• 2nd stage : 1 cm3
• Oil tank Capacity : lt 2.2
• Die weight Kg 6
• Max Hex mm 49.7 x 57.4
• Max stroke mm 20
• Weight : 95 Kg. (100 Ton), 110 Kg (150 Ton)
• Dimension cm 62 x 31 x 42

This Tool is used for clamping the Conductor/Earthwire drums and capable to lift & hold in position the wooden/steel conductor/Earthwire drums having diameter of 2200mm and width of 1200mm. The clamping jaw are provided with tapered bushes to compensate for any difference in the bore size of the drum. Breaking arrangement is provided to the clampiing jaws to hold the drum in position, whenever required. The clamping jaws are provided with auxiliary pointed screws to ensure positive griping action of the drum. The stand legs & base are made of heavy duty MS Pipe/Channel . The base frame is collapsible type for light weight and easy transportation. The Manual Jack unit have Gear mechanism, Lifting Arms have Individual lifting controls to facilitate in leveling both sided and thus keeping the drum in proper horizantal position. The braking arrangemement provided.

Technical Specification

• Suitable for paying out cables during stringing conductors operations
• Tubolar steel construction with a protective coating
• Reel lifting by Manual Jack Hand Operated Gear Mechanism.
• The frame is completely detachable to reduce dimensions during transport.
• Mechanical disk braking system to control the drum when unwinding the conductor.
• Available in SWL- 3 Ton, 5 Ton & 10 Ton

This Spacer car is used for stringing works and repairing works for Four bundle conductor having four arms with eight nylon wheels on ball bearing, with Stationery brake, frame made of tubular mild steel pipe.

Head boards used for connecting conductors, balancing wheel fitted with counter weight for passing on the running out block. Swivel joints and steel slings wire rope provided with spliced eyes at both ends. Specifically designed to connect the pulling rope, max 28mm diameter, with 6 bundled conductors.

Technical specification:

• The frame are made of Mild Steel
• The Pulleys are mounted on Cylindrical Roller Bearings.

Specifically designed to connect the Pulling Rope with a fibre optic cable. They are composed of several jointed rods and two drawback counterweights.
Technical specification:

• Non Rotating Counterweight Device for Stringing O.P.G.W Cables
• Specify Designed to connect the Pulling Rope with a Fiber Optic Cable.
• They are composed of several jointed rods.
• Coating : Epoxy primer coating thereafter Enamel Painted
• Safe working Load : 5 Ton
• Weight- 27 Kg.

This Spacer car is used for stringing works and repairing works for Six bundle conductor having six arms with ten nylon wheels on ball bearing, with Stationery brake, frame made of tubular mild steel pipe.

This tool is used for the free movement of drum of earth wire. It have the capacity to take the standard earth wire drumdiameter 1200mm & 1000mm width. The turn table is fabricated out of MS channel and angle iron, Braking arrangement provided in the rotating platform and brake-band is to be used for the purpose. The brake arrangement is such that it can be set to a position instead of keeping it pressed. The rotating platform is fitted with tapper roller bearings and ball bearing for easy rotation.The rotating platform is further supported by four rollers to support easy movement as well as to avoid bending of the center shaft. Slotted MS with Screw rod is also provided for clamping the drum to Turn Table.

Technical Specification:

• Made of Mild Steel
• With Breaking arrangement
• Weight Kg. 160

Made of high tensile steel, Suitable to connect pilot and pull cables in order to avoid torsional strain It designed to get smoothly into the grooves of pulley blocks they are mounted on the thrust bearing.

This Spacer Car is used for stringing works and repairing works for 2 bundle conductor having four arms with eight nylon wheels on ball bearing, with Stationery brake, frame made of tubular mild steel pipe.

Clipping Hanger frame are made of Mild Steel Pipe and coating with Epoxy primer and thereafter enamel painted.
Technical Specification:

• The frame are made of Mild Steel Pipe.
• Coating: Epoxy primer and thereafter enamel painted.
• Safe Working load: 5 Ton.

Connect pilot rope or pulling rope and pass over the bull wheel on the puller and its made with High Tensile Steel.

Sag Plate body made with mild steel and coating with expoy primer and thereafter enamel painted and safe working load is 5 Ton
Technical Specification:

• Body: The Frame are made of Mild Steel.
• Rusting Protection : Primer thereafter enamel painted.
• Safe Working Load: 5 Ton.
• Weight: 18.32 Kg.

Head boards used for connecting conductors, balancing wheel fitted with counter weight for passing on the running out block. Swivel joints and steel slings wire rope provided with spliced eyes at both ends. Specifically designed to connect the pulling rope, max 28mm diameter, with 4 bundled conductors.
The equipment includes the necessary rope lengths and swivel joints.
Technical specification:

• The frame are made of Mild Steel
• The Pulleys are mounted on Cylindrical Roller Bearing

Head boards used for connecting conductors, balancing wheel fitted with counter weight for passing on the running out block. Swivel joints and steel slings wire rope provided with spliced eyes at both ends. Specifically designed to connect the pulling rope, max 24mm diameter, with 2 bundled conductors.

The equipment includes the necessary rope lengths and swivel joints.

Technical specification:

• The frame are made of Mild Steel
• The Pulleys are mounted on Cylindrical Roller Bearings.

Joint Protector for Conductor is designed to protect the compression sleeve joints for ACSR conductor in line stringing operation, and it can pass through stringing blocks safely. Conductor joint protector is used for protection of conductor joint after compression. There is rubber head on both sides of protector.

Technical Specification

• Made of heavy duty steel tube
• Both side rubber bushes to avoid damage of conductor
• Specifically designed to protect the mid span joint made at the " tensioner station"

Negative self-acting brake.Hydraulic dynamometer with set point and automatic shutoff beyond maximum set pull. Hydraulic oil cooling system.Automatic Traverse System to wind wire rope correctly on drum.Rigid axle for towing at max. Speed of 35km/hr.Towing shaft with adjustable height.

erformance

• Max pull . 50 kN
• Speed at Max pull . 1.5 km/h
• Max Speed . 5 Km/h
• Pull at max speed . 8.7 Kn

Drum Specifications

• External diameter . 550 mm
• Internal diameter . 360 mm
• Width . 774 mm
• Capacity 450 m . Rope 14 mm

Engine

• Diesel . 23.4 kW (31.4 hp)
• Make . Mitsubishi
• Cooling System .Water
• Electric System. 12 V

Machine Trip at the time of following Alarm

• Emergency Stop
• Overloading beyond maximum set pull.
• Low Lub. Oil Pressure.
• High Engine Temp.

Alarm Indication

• Air Filter Chock
• Hydraulic Filter Chock
• Battery Charge

• 
  Apply to hoisting mechanical equipment and erecting pole and towers, string conductor in power lines.
  Provision to groting the Winch on ground
  Drive by Petrol Engine.
  Four Gear mechanism ( 3+1 ), 3 Forward and 1 Reverse.
  Hand Break Provision.
  Provision to Hold the Wire and Load at the time of Stand Still.
  Detachable Transit Tyres.
• Three Types are Available :
  • Single Taper Pulley.
  • Double Grooved Pulley in Horizontal Direction.
  • Double Grooved Pulley in Vertical Direction.

• Tensioner with engine aggregate for regulation (sagging). For 1 or 2 conductor up to Dia 45 mm and a Tension force Max. 16 Ton. In tensioning mode, automatic control of the machine via ATS (Automatic tensioning System) Pulling mode to regulate the conductor with a max. pull force of 16 Ton and to install the conductor into the machine. Integrated diesel hydraulic aggregate to control the ATS and active the pulling mode, the oil cooling system and the optional addition hydraulic system for drum stand. Robust machine constructed for highest reliability, easy operation and minimal maintenance
• Technical data in tensioning mode :Max. tension force : 16000 Kg. Continuously adjustable speed : 0-13Km/h minimal tension force : approx. 400 kg (with ATS
  
  Technical data in regulating mode (pulling mode) :Max. pull force : 16000 kg Continuously adjustable speed: 0 - approx. 13 km/h
  
  Engine :Water-cooled diesel engine with 76.5 kW (102 HP) 24 V system with high capacity battery for a safe start also at cold temperatures.
  
  Weight and dimensions:Weight : approx. 7000 kg Length x width x height : approx. 5500 x 2400 x 2600 mm

This Spacer Car is used for stringing works and repairing works for 2 bundle conductor having four arms with eight nylon wheels on ball bearing, with Stationery brake, frame made of tubular mild steel pipe.

The head type temporary mesh sock joints are specifically designed to temporarily connect the aluminium, steel or copper conductor to the pulling rope. They consist of variable pitch steel wires, which effectively distribute the gripping effect on the conductor.

The sheave are made of aluminum alloy mounted on ball bearings. The groove is lined by Rubber Ring. The frame are made of Mild steel.Technical Specification:

• Frame: Mild Steel
• Motion: Ball Bearing.
• Coating: Epoxy primer and thereafter enamel painted.

• Sheave dimension for 300mm(Outside diameter x root diameter x sheave width) 300 x 236 x 65 mm
• Safe working load for 300mm: 2.5 Ton
• Weight for 300mm- 10 Kg.

• Sheave dimension for 400mm(Outside diameter x root diameter x sheave width) 400 x 295 x 75 mm
• Safe working load for 400mm: 2.5 Ton
• Weight for 400mm- 14 Kg.

The sheave are made of aluminum alloy mounted on ball bearings. The groove is lined by Rubber Ring. The frame are made of Mild steel. Technical Specification:

• Frame: Mild Steel
• Motion: Ball Bearing.
• Coating: Epoxy primer and thereafter enamel painted.

• Sheave dimension for 300mm (Outside diameter x root diameter x sheave width) 300 x 236 x 65 mm
• Safe working load for 300mm: 2.5 Ton
• Weight for 300mm - 10 Kg.

• Sheave dimension for 400mm (Outside diameter x root diameter x sheave width) 400 x 295 x 75 mm
• Safe working load for 400mm: 2.5 Ton
• Weight for 400mm - 14 Kg.