Omega Valve Mfg. Co

Kadamtala, Howrah, West Bengal

Typically used in applications where air builds up in pipelines creating unwanted stresses and hammerAlso used to allow rapid charging or draining of pipelinesNormally positioned on an elevated section of pipelineEspecially suited for use on filtration systems, transmission pipelines and sewerage linesSturdy, strong, UV resistant GRP constructionLarge orifice, ideal for use on smaller pipelinesAllows discharge of 28 m3/hour at 100 kPaPressure range 20-1600 kPa25 mm male BSP inlet

Sited in West Bengal, India, we are engrossed in manufacturing and supplying of Sluice Gate Valves to our customers all over the country. Made from the finest quality raw materials, our products are known for their reliable performance and high strength. Our Sluice Gate Valves are used where straight-line and minimum restriction flow of fluid is desired. Customers can acquire Sluice Gate Valve at nominal rates from us.

Spring Loaded Brass Check (Non-Return) Valve Economical spring loaded check (non-return) valve with a brass body and NBR gasket. This valve requires a minimum pressure of 0.1 bar to open. Size : (6mm) to 4 (100mm) Connection : BSP Fluids : Air Inert Gas Oil Water Installation : Any Orientation

Construction : Bolted Bonnet, inside screwed non-rising spindleBody Materials : Cast IronTrims : Bronze / Stainless Steel.End Connection : Flanged IS/BS/DIN/ASA/APIManufacturing Standard : IS:780, IS:2906 : BS:5150 / BS:1218 / BS:5163 /BS:3464 / DINCast Iron Valves:3204Pressure Class : PN: 0.4, 0.6, 1.0 & 1.6Note : IS:14846 : 200 are also availableSizes : 50 mm to 1200 mmOther Features : Gear, by-pass, indicator, Head Stock, Extension spindle, Actuator operated, pneumatic operated.

We are in the business of manufacturing and supplying of Fabricated Gate Valve from Howrah, West Bengal. We make available our Fabricated Gate Valves in various specifications to fulfill the variegated demands of buyers. Our Fabricated Gate Valves are appreciated due to their robust design, high strength and perfect finish. For acquiring Fabricated Gate Valves at budget friendly rates, contact us.

 

Highlights :

• These are manufactured by utilizing quality-approved raw material and in adherence with set industry norms.
• Our Forged Gate is specifically designed for preventing or permitting the flow of liquid, gas etc.

OMEGA Valve Products distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2 through 24 and larger in various material options. Gate Valves is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. Gate valves are characterised as having either a rising or a nonrising stem. Rising stems provide a visual indication of valve position because the stem is attached to the gate such that the gate and stem rise and lower together as the valve is operated. Nonrising stem valves may have a pointer threaded onto the upper end of the stem to indicate valve position, since the gate travels up or down the stem on the threads without raising or lowering the stem.

Owing to our vast industrial experience in this domain we are actively engaged in offering Knife Gate Valve. The offered gate valve is manufactured from finest quality material, in complete compliance with quality standards. This gate valve can be also customized by our workforce in various specifications. Our gate valve is widely used in thermal power plants, pulp & paper industries.

We are recognized Manufacturer and Supplier of Cast Iron Globe Valves from Howrah, West Bengal. Cast Iron Globe Valves are for regulating the flow of fluid in the pipeline. Rust resistance and strong construction make our Cast Iron Globe Valves high in demand among the buyers. These valves are available in different specifications for the ease of buyers. We can provide Cast Iron Double Flanged Globe Valve all over the country.

Details :

• Disc suitable for Repacking under pressure when fully opened.
• Flanges are faced and drilled as per ANSI B 16.10 and B 16.5, 125 Ratings Respectively.
• Body
• Body Seat Ring Disc
• Trust Plate
• Stem
• Locking Washer
• Jam Nut
• Gasket
• Stuffing Box with Yoke
• Back Seat Bush
• Gland Packing
• Gland
• Hand Wheel
• Set Screw

 

Manufacturing Range-
Size :

• 2" to 16"
• 125 lbs/ sq. inch.
• Manufacturing Range

 

Note : Face to Face and Flange Dimensions can be altered as per client's requirement Hydraulic Test Pressure

 

Body : Seat / Back Seat

• Seat Air :
  • 25 Kg/Cm^₂
  • 16 Kg/Cm^₂
  • 6 Kg/Cm^₂

Since its inception, we have been instrumental in providing a wide range of Cast Iron Check Valves to our customers. Quality tested material is used for manufacturing Cast Iron Check Valves in adherence with IS specifications. Owing to our large network, we are able to cater the variegated demands of buyers. We can process small as well as bulk orders of Cast Iron Double Flanged Swing Check Type Non-Return Valve as and when requested by the customers.

Details : Flanges are faced and drilled as per IS Specification. Oil cushioned cylinder or counter weight arrangement, if asked can be provided to achieve non-slamming effect.

 

Reference Parts :

• Body
• Body Seat Ring
• Flap
• Flap Seat Ring
• Hinge Pin
• Hinge
• Gasket
• Cover
• Nuts & Bolts
• Bypass Arrangement
• Counter Weight Arrangement
• Dash Pot Arrangement
• General Manufacturing Standard : IS : 5312 (Part-1) 1980

 

Manufacturing Range-
Sizes :

• 50 mm to 125 mm;
• 150 mm to 300 mm;
• 350 mm to 600 mm

 

Manufacturing Range-
Note : Face to Face and Flange Dimensions can be altered as per client's requirement.

 

Hydraulic Test Pressure :

• Body :25 Kg/Cm^₂ for 50mm to 125 mm Seat / Back Seat - 15 Kg/Cm^₂
• Body : 20 Kg/Cm^₂ for 150mm to 300 mm Seat / Back Seat- 10 Kg/Cm^₂
• Body : 16 Kg/Cm^₂ for 350mm to 600 mm Seat / Back Seat - 8 Kg/Cm^₂