CORRUGATION GUM POWDER

A Ready-Mix Adhesive Powder which usually has some quantity of free starch and un-gelatinized starch. The free starch gets gelatinized by the heat of Corrugating medium and gives a Stronger bonding. It is based on Best Quality Starch, specially treated and formulated by various additives with water mix ratio (1 : 4 to 1 : 5).

The Gum is carrier based formulation which gives Consistent Viscosity, High initial Tack, Quicker Gelling and rapid bond forming properties to enable the machines to run on desired speeds.

The Gum sets very fast and allow further processing of board without any delay. The adhesive is used on Latest High Speed Corrugation Machines with wide range of BF & gram age of papers.

S P E C I F I C A T I O N S

Appearance Off white Color Powder

Mesh size 80 % pass through 80 mesh

Moisture 10 % Max.

Viscosity (B4 Cup) 20 to 25 sec

PH Alkaline

Fermentation No

Packing 30 kg & 40 kg PP Bags

A D V A N T A G E S

- Uniform flow, Consistent Viscosity

- No lumps, ensuring smooth application of Gum

- Good Mileage and Low Consumption as compared to Caustic based Gum

- Superior Bonding & No Chance of De-Lamination

- Good Tack & Fast Drying

- Has low gelatinization temp., which gives Faster Machine Speeds and Higher Production Output

- Excellent Bursting Strength & Compression Strength

G U M P R E P A R A T I O N

- Take 150-160 litres (approx.) water in tank/drum

- Pour the 40kg Corrugation Gum Powder to drum

- Stir mixture for approx. 15 minutes

- Measure Viscosity by B4 Cup & Add extra water if needed to get Viscosity

S T O R A G E

Store in Cool & Dry Area, Keep away from direct heat , Sunlight and Moisture

Dextrins are prepared by heat treatment in presence of chemicals to suitably modify characteristics and properties of starch. They find application in dyes, adhesives, foundries, fire crackers, oil drilling and many other industries. Unlike starch dextrin are soluble in water. The severity of the treatment determines the degree of solubility , which is the basis of classifying or grading dextrin. Finished dextrin are very fine powder varying in color from pure white to dark yellow.

Yellow dextrin is manufactured by partially hydrolyzing Starch, using the dry roasting method in the presence of catalyst: The dextrinisation chemically reduces the starch molecules into smaller components. Yellow dextrin has low viscosity and is very sticky and hygroscopic in nature. It is used in the foundry as a binder for cores. Yellow dextrin helps in increasing dry strength at the same time being completely soluble in water.

dona lamination gum powder

fine & dry powder, made by starch hydrolysis and formulated by various additives. the gum powder is specially developed for use in pasting of paper and lamination film for dona pattal industry.the gum powder has the advantages of perfection and consistency in quality. the product is highly appreciated by customers for its fast tack and very quick setting properties sets within 30 minutes in manual plants).

different grades with water mix ratio (1:4 to 1:9) are available to suit every customer for any bf & gsm of papers.

PASTING GUM POWDER

Gum plays a major role in Corrugated Box Production and the Quality of the final products. The Gum itself constitutes a very small proportion of the corrugated board, but has a major impact on both the Productivity of the Corrugator and Quality of final board.

Fine & dry powder, made by starch hydrolysis and formulated by various additives. The product is highly appreciated by Customers for its FAST TACK and VERY QUICK SETTING properties. Board sets within 30 minutes in Manual Pasting Machines and pasted board can be immediately taken up to next stage of operation in Auto Laminator Machines.

Different Grades with water mix ratio (1:4 to 1:9) are developed for use in Manual / Auto Laminator Pasting Machines to suit every Customer for any BF & GSM of papers.

FOR MANUAL PASTING MACHINES

Grades Water Mix Ratio % Solids Viscosity(B4 Cup) PACKING

Eco/White/Gold 1 : 4 19 -20 35 5 sec 40 KG

Eco/White/Gold 1 : 5 16 - 17 35 5 sec 30 KG

Eco/White/Gold 1 : 7 12 - 13 35 5 sec 25 KG

Eco/White/Gold 1 : 9 9 - 10 35 5 sec 20 KG

However Viscosity, Solids and Packing can be supplied as per Customers requirements.

ADVANTAGES

- Most important feature is its Fast Drying even during rainy seasons and winters also.

- Ready to Use within Few Minutes i.e. No Dependability, In-House Glue Making Whenever Required.

- Low Cost , Good Mileage , Low Application & Consumption.

- Better penetration to form deeper fiber-tearing bonds with minimal cure time.

- High Solids Ensure Higher Bursting Strength (B.S) and Compression Strength (C.S).

- Fast Tack, Setting & Curing time.

- Superior Bonding & No Chance of De-Lamination

- Quick Setting , which ultimately results faster running speeds - resulting in higher Production Output.

CORRUGATION GUM POWDER

A Ready-Mix Adhesive Powder which usually has some quantity of free starch and un-gelatinized starch. The free starch gets gelatinized by the heat of Corrugating medium and gives a Stronger bonding. It is based on Best Quality Starch, specially treated and formulated by various additives with water mix ratio (1 : 4 to 1 : 5).

The Gum is carrier based formulation which gives Consistent Viscosity, High initial Tack, Quicker Gelling and rapid bond forming properties to enable the machines to run on desired speeds.

The Gum sets very fast and allow further processing of board without any delay. The adhesive is used on Latest High Speed Corrugation Machines with wide range of BF & gram age of papers.

S P E C I F I C A T I O N S

Appearance Off white Color Powder

Mesh size 80 % pass through 80 mesh

Moisture 10 % Max.

Viscosity (B4 Cup) 20 to 25 sec

PH Alkaline

Fermentation No

Packing 30 kg & 40 kg PP Bags

A D V A N T A G E S

- Uniform flow, Consistent Viscosity

- No lumps, ensuring smooth application of Gum

- Good Mileage and Low Consumption as compared to Caustic based Gum

- Superior Bonding & No Chance of De-Lamination

- Good Tack & Fast Drying

- Has low gelatinization temp., which gives Faster Machine Speeds and Higher Production Output

- Excellent Bursting Strength & Compression Strength

G U M P R E P A R A T I O N

- Take 150-160 litres (approx.) water in tank/drum

- Pour the 40kg Corrugation Gum Powder to drum

- Stir mixture for approx. 15 minutes

- Measure Viscosity by B4 Cup & Add extra water if needed to get Viscosity

S T O R A G E

Store in Cool & Dry Area, Keep away from direct heat , Sunlight and Moisture

Dextrins are prepared by heat treatment in presence of chemicals to suitably modify characteristics and properties of starch. They find application in dyes, adhesives, foundries, fire crackers, oil drilling and many other industries. Unlike starch dextrin are soluble in water. The severity of the treatment determines the degree of solubility , which is the basis of classifying or grading dextrin. Finished dextrin are very fine powder varying in color from pure white to dark yellow.

Yellow dextrin is manufactured by partially hydrolyzing Starch, using the dry roasting method in the presence of catalyst: The dextrinisation chemically reduces the starch molecules into smaller components. Yellow dextrin has low viscosity and is very sticky and hygroscopic in nature. It is used in the foundry as a binder for cores. Yellow dextrin helps in increasing dry strength at the same time being completely soluble in water.

dona lamination gum powder

fine & dry powder, made by starch hydrolysis and formulated by various additives. the gum powder is specially developed for use in pasting of paper and lamination film for dona pattal industry.the gum powder has the advantages of perfection and consistency in quality. the product is highly appreciated by customers for its fast tack and very quick setting properties sets within 30 minutes in manual plants).

different grades with water mix ratio (1:4 to 1:9) are available to suit every customer for any bf & gsm of papers.

PASTING GUM POWDER

Gum plays a major role in Corrugated Box Production and the Quality of the final products. The Gum itself constitutes a very small proportion of the corrugated board, but has a major impact on both the Productivity of the Corrugator and Quality of final board.

Fine & dry powder, made by starch hydrolysis and formulated by various additives. The product is highly appreciated by Customers for its FAST TACK and VERY QUICK SETTING properties. Board sets within 30 minutes in Manual Pasting Machines and pasted board can be immediately taken up to next stage of operation in Auto Laminator Machines.

Different Grades with water mix ratio (1:4 to 1:9) are developed for use in Manual / Auto Laminator Pasting Machines to suit every Customer for any BF & GSM of papers.

FOR MANUAL PASTING MACHINES

Grades Water Mix Ratio % Solids Viscosity(B4 Cup) PACKING

Eco/White/Gold 1 : 4 19 -20 35 5 sec 40 KG

Eco/White/Gold 1 : 5 16 - 17 35 5 sec 30 KG

Eco/White/Gold 1 : 7 12 - 13 35 5 sec 25 KG

Eco/White/Gold 1 : 9 9 - 10 35 5 sec 20 KG

However Viscosity, Solids and Packing can be supplied as per Customers requirements.

ADVANTAGES

- Most important feature is its Fast Drying even during rainy seasons and winters also.

- Ready to Use within Few Minutes i.e. No Dependability, In-House Glue Making Whenever Required.

- Low Cost , Good Mileage , Low Application & Consumption.

- Better penetration to form deeper fiber-tearing bonds with minimal cure time.

- High Solids Ensure Higher Bursting Strength (B.S) and Compression Strength (C.S).

- Fast Tack, Setting & Curing time.

- Superior Bonding & No Chance of De-Lamination

- Quick Setting , which ultimately results faster running speeds - resulting in higher Production Output.