Om Optel Industries Pvt. Ltd Bhopal, Madhya Pradesh

Fiber-optic communication is a method of transmitting information from one place to another by sending pulses of light through an optical fiber. The light forms an electromagnetic carrier wave that is modulated to carry information.   The process of communicating using fiber-optics involves the following basic steps: Creating the optical signal involving the use of a transmitter, relaying the signal along the fiber, ensuring that the signal does not become too distorted or weak, receiving the optical signal, and converting it into an electrical signal.

It is made of either of three grades of High Density Poly Ethylene polymers. i.e PE-63, PE-80 or PE-100.   PRODUCT RANGE :  These HDPE pipes are available in sizes 20 mm to 450 mm in pressure rating of PN-2.5, PN-4.0, PN-6.0, PN-8.0, PN-10.0 , PN-12.5 & PN-16.0 in all three grades PE-63, PE-80 and PE-100.     APPLICATIONS Effluent and Waste Water Disposal:  Effluents of varied chemical compositions can be effectively disposed of using  Om Optel  HDPE pipes & coils, with the aid of the latest know-how on piping engineering, pipelines for waste collection and disposal in chemical industry. Longevity of  Om Optel  pipes under such application would rate the best amongst the conventional pipe even under critical service conditions.   Domestic Gas Distributions :  Earlier, engineers always carried a psychological fear in using HDPE pipes rather plastic pipes for conveyance of inflammably gases. However experiments and extensive trials proved these fears totally wrong and have established excellence of performance of HDPE pipes for conveyance of all type of combustible gases. Experiments have also proved that the permeable losses are insignificant in regard to safety and environmental impact   Submarine Pipelines :  One of the most important applications where all salient features of  Om Optel  pipes prominently figure out is for under water pipelines.  Om Optel  pipes have been successfully laid for under water river crossing, creek crossing, marine out-falls and for brine intake lines in the open sea. Hazardous chemical effluents and radio active wastes are being harmlessly disposed into deep sea through Om Optel  pipes with substantial cost savings. Schemes which would have been dropped due to economical un-viability have been made feasible with  Om Optel  pipes.

• M.F.I.(190°C, 5kg load)0.41 to 1.1gm/10 mins
• Specified base density940.4 to 946.4 Kg/mtr 3
• Material GradePE-63, PE-80, PE-100
• Carbon Blank(2.5 ± 0.5%)
• Antioxidant< 0.5% by mass
• Tensile strength (min) (27 ± 2°C)19MPa (Testing speed = 100mm/min 10%)
• Elongation>350%
• Reversion<=3%
• Hydraulic CharacteristicsNo sign of localized swelling. leakage or weeping (at 80°C for 165 & 48 hrs.)

Om Optel Permanently Lubricated HDPE Ducts are formed by co extrusion technique and are used for laying Optical Fiber Cables as under ground ducting / conduits. MATERIAL :  The base raw material being used for the manufacturing Permanently Lubricated Ducts is High Density Poly Ethylene. The grade of raw material is ultra violet grade and is confirming to IS:7328-1992 & IS : 2523 or ISO : 1183 & ISO : 1133 and is designated as PEELA-50T-012 (CACT Approved) and inner layer permanently lubricated material DOW CORNING grade-50MB002. APPLICATIONS :  Telecommunication, Computer Network, Automatic Signaling, Railways Information Network. Highways, Cable Service Providers, Broad Band networks, Electric cable installation etc.  

Multilayer Film, Shrink Film Milk Packaging Film, Milk Powder Packaging Film, Lamination Film, Liquid Packaging Film, Mulch Film, Oil and Food Packaging Film, Water Pouch Film, Liner of LD/HM and laminates as our future development.   Multilayer Packaging Film Lamination Film

Plastic injection molding components All types of ctc caps & plastic closures Like edible oil bottle caps, soft drink caps, water bottle caps and Injection molded articles suitable for 180 ton machine.