Vadodara, Gujarat, India
Verified
Add Review
Our Products
Plumbing & Pipe Fittings
2 Products availableLock Nuts
2 Products availableGearbox & Gear Parts
1 Products availableSteel Elbow
1 Products availableFasteners
1 Products availableCnc Machined Components
1 Products availableOur offered Product range includes Stainless Steel Studs, Cotter Pins, Dowel Pins, Coupling Hex Nuts and Grinder Build Circlips.
We introduce ourselves as a Manufacturer, Supplier, and Exporter of Stainless Steel Studs. These Stainless Steel Studs are sturdy and have high compressive strength. Stainless Steel Studs are resistant to corrosion, thus can be used in corrosive environments. Stainless Steel Studs are available in different head-type and specifications as per the requirement.
Range
Grades
Thread Specification : BSW , UNC , UNF , BSF , NPT , NPTF , BSP , BSPT , NPS , NPSF , Metric Coarse, Metric Fine , Left Hend Thread , etc.
OHP FASTENERS PVT LTD Split pins are very common as they are easy to use and effective. Often they are found on self-assembly trolleys, light wheel barrows, lawn mowers and similar items. They are usually made from soft steel or aluminium and they come in a range of sizes.
Stainless Steel Split Pins / Cotter Pins :
Split pins are measured along the shortest length of the pin. The nominal diameter of the pin is the size of hole it is designed to pass through. This means the pin will be fractionally smaller than its nominal diameter.
Sizes Available :
Grades :
Range :
The Specifications Of IS - 549 / 61, IS - 549 / 74 (Indian), BS - 574 (British), And DIN 94 (German)
| Available Materials | Available Materials and Finish |
|---|---|
| Stainless Steel 202, 304, 310, 316, 904L | Zinc Plating |
| Carbon Steel Grade 8 | Hot Dipped Galvanized |
| Mild Steel | Trivalent Zinc |
| Spring Steel | Chrome & Nickel |
| Brass and Copper | Blackodized |
| Other Special Materials Available on Request | Other Special Finishes Available on Request |
OHP Fasteners Pvt. Ltd. Engineers steel dowel pins are precision hardened and ground parallel pins, engineered to tight tolerance limits, for accurate locating and alignment, in drilled and reamed holes.Ohp fasteners pvt ltd offer a complete range of hardened steel and silver steel dowel pins, both plain and tapped (internally threaded), in either metric or imperial standard measurements. Custom pins to drawing can also be quoted and manufactured to most customer requirements. OHP also manufacture a tapped dowel pin extractor tool in metric sizes M3 – M10 and also to BSW, BSF, UNC, and UNF upon request. All drawings for these items are available in our catalogue on the section of the site.
Key Features
Sizes Available
Specifications
| Available Materials | Available Materials And Finish |
|---|---|
| Stainless Steel 202,304,316 | Zinc Plating |
| Carbon Steel Grade 8,10.9,12.9 | Hot Dipped Galvanized |
| Mild Steel | - |
| Spring Steel | Chrome & Nickel |
| Brass And Copper | - |
| Other Special Materials Available On Request | - |
We are an acclaimed Manufacturer, Exporter, and Supplier of Hex Nuts. Hex Nuts are casted out of high-grade stainless steel and alloys to offer durability and long service life. Hex Nuts are available in various sizes and shapes with different grades. Hex Nuts are used in various industries and other machinery applications.
Range
Grades :
Thread Specification : BSW, UNC, UNF, BSF, NPT, NPTF, BSP, BSPT, NPS, NPSF, Metric Coarse, Metric Fine, Left Hend Thread, etc.
Circlips are manufactured under rigid quality control systems. We offer a wide range of Internal Circlips, External Circlips, E type Circlips, C type Circlips, Snap Rings and Bearing Locks.
Available Din : DIN 471, DIN 472, DIN-6799, IS-3075 Type-E
Circlips are widely used in Automobile, Machinery Assembly, Gear Assembly and Electronics :
Size Available :
Grades :
Range :
Specification
| Available Materials | Available Materials and Finish |
|---|---|
| Stainless Steel | Zinc Plating |
| Carbon Steel Grade 8 | Hot Dipped Galvanized |
| Mild Steel | Trivalent Zinc |
| Spring Steel | Chrome & Nickel |
| Brass and Copper | Blackodized |
| Other Special Materials Available on Request | Other Special Finishes Available on Request |
OHP Fasteners Pvt. Ltd. Clevis Pins are a type of fastener that will allow the rotation or swivel of the connected parts about the axis of the pin linkage. A clevis pin, sometimes referred to as a link pin or hinge pin, consists of a head, shank and cross drilled hole. When using a fastening, such as a clevis pin, the hole which is at the opposite end of the pin to the head is inserted through the items to be linked, and then a cotter pin, R clip or similar retaining fastener is inserted through the hole to fix the clevis pin in place.
Like a set screw, a clevis pin is often used to prevent two other pieces from moving relative to each other, A clevis pin is less adjustable, in that it can hold two parts in exactly one relative position (because holes must be drilled in both parts) A clevis pin is also more secure, as it is less apt to work loose due to vibration., this is why clevis pins are often found in agricultural machinery. Clevis Pins are currently supplied in imperial and metric sizes to ISO 2341B DIN 1444B, in stainless steel 202, 304 , 316 , MS , Corbon Steel , Aluminium , Copper Brass, and bright zinc coated steel.
Clevis Pins are available to buy online, or for large enquiries please call our sales desk. We maintain large stocks on a vast variety of clevis pins and always welcome pins to drawing too.
All drawings for these items are available in the Boneham catalogue.
Key Features
Sizes Available :
Specifications
| Available Materials | Available Materials And Finish |
|---|---|
| Stainless Steel202,304,304l,309,310,316,321,347l,904l | Zinc Plating |
| Carbon Steel Grade 8 | Hot Dipped Galvanized |
| Mild Steel | Trivalent Zinc |
| Spring Steel | Chrome & Nickel |
| Brass And Copper | Blackodized |
| Other Special Materials Available On Request | Other Special Finishes Available On Request |
OHP Fasteners Pvt. Ltd. Internal Circlips has a large free diameter and gap width, consequently it fits more tightly into the groove and provides higher and more uniform thrust load capacity. Lugs with holes are provided for rapid fitting or removal with circlip pliers.
Our range of circlips are used for restraining the axial movement of components or shafts. These are also used particularly where space restrictions are applicable and also in small mechanisms. Further, our range is suitable for Tractors, Two-wheelers, Four-wheelers, heavy & light commercial vehicles, auto engines, transmission etc.
Standard Material : Carbon Spring Steel, Stainless Steel 304, 309, 310, 316, 410, 420, 430, 904L
Standard Finish : Phosphate and Oil Finishing
The External Circlips, supplied by us, are reckoned for their durability and long service life. OHP Fasteners Pvt. Ltd. External Circlips The most common form of axially fitted circlips for bores with grooves. The circlip has a large free diameter and gap width, consequently it fits more tightly into the groove and provides higher and more uniform thrust load capacity.
We are manufactures of Solid Rivets and Semi Tubular Rivets in Copper (Cu), Aluminum (Al), Brass, Stainless Steel (SS) and Mild Steel (MS) with shank diameter conforming to relative bass.
We manufacture bus body rivets, rivets used in railway coach building and rivets for clutch plates and brake liners and other Automobile parts. We also cater Umbrella industry, Home Appliances Industry, Leather Luggage/Bags Industry, Stationary Industry, Hardware Industry, Baby Products manufactures, File Industry, Batch-Clips manufacturer, Torch industry, Electrical parts manufacturers/assemblers, Car-Wiper Industry, Cycle Industry, Switchgears Industry, Utensils Industry, Measure tapes and tools manufacturers, etc.
Specifications
| Available Materials | Available Materials And Finish |
|---|---|
| Stainless Steel202,304,304l,309,310,316,321,347l,904l | Zinc Plating |
| Carbon Steel Grade 8 | Hot Dipped Galvanized |
| Mild Steel | Trivalent Zinc |
| Spring Steel | Chrome & Nickel |
| Brass And Copper | Blackodized |
| Other Special Materials Available On Request | Other Special Finishes Available On Request |
