Rajkot, Gujarat, India
Our Products
Two Layer Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
| Blown Film Line Plant Model | Screw Size (mm) | Screw L/D Ratio | Feed Section Type | Max LayFlat Width | Thickness Range (Micron) | Max Production Capacity | Total Connected Load | Blown Film Line - Dimension Of Plant | ||
| (mm) | (kg/hr) | (kw) | L | W | H | |||||
| OESCOBL 40-40 | 45-45 | 28:1 | Smooth Feed | 750 | 20 to 100 | 55 | 48 | 25 | 20 | 16 |
| OESCOBL 50-50 | 50-50 | 28:1 | Smooth Feed | 900 | 20 to 100 | 80 | 58 | 30 | 20 | 18 |
| OESCOBL 65-65 | 65-65 | 28:1 | Smooth Feed | 1200 | 20 to 100 | 120 | 65 | 35 | 23 | 20 |
| OESCOBL 45-45 | 45-45 | 30:1 | Groove Feed | 800 | 20 to 100 | 90 | 64 | 25 | 20 | 18 |
| OESCOBL 50-50 | 50-50 | 30:1 | Groove Feed | 1200 | 20 to 100 | 125 | 75 | 30 | 25 | 24 |
Ocean Extrusion offers PP/HDPE monofilament plant a highly reliable option to produce superior quality of monofilament yarns which are then applied to make plastic ropes, brushers, nets, mesh used in surgery, and many more products. PP/HDPE monofilament mach de is equipped with high quality components for higher production capacity. Production of monofilament line is also possible at low power consumption and most advantageous production speed.
| PLANT MODEL | SCREW SIZE (MM) | Screw l/d ratio |
FEED SECTION TYPE | NO. OF LINES | STATION WINDERS | MAX PRODUCTION CAPACITY | TOTAL CONNECTED LOAD(KW) | MAIN DRIVE (HP) | Polymer To be Proopsspd | Dimension of plant (feet) | ||
| L | W | H | ||||||||||
| OESMF 50 | 50 | 28:1 | Smooth Feed | 80 | 6 | 40 | 42.6 | 10 | PP/HDPE | 60 | 20 | 8 |
| OESMF 65 | 65 | 28:1 | Smooth Feed | 140 | 10 | 60 | 57 | 15 | PP/HDPE | 70 | 20 | 8 |
| OESMF 75 | 75 | 28:1 | Smooth Feed | 240 | 14 | 90 | 69.8 | 25 | PP/HDPE | 70 | 20 | 8 |
| OESMF 75 | 75 | 28:1 | Smooth Feed | 280 | 16 | 100 | 70 | 25 | PP/HDPE | 70 | 6 | 8 |
| OESMF 90 | 90 | 28:1 | Smooth Feed | 400 | 24 | 150 | 111.6 | 50 | PP/HDPE | 90 | 20 | 8 |
| OESMF 51 | 50 | 28:1 | Smooth Feed | 200 | 12 | 90 | 63.8 | 20 | PP/HDPE | 70 | 20 | 8 |
Raffia fiber is one of the popular ingredients considered for making packaging components. Investing in raffia tape stretching plant would remain a profitable and affordable option. Raffia tape stretching machine is equipped with latest technology of fabricated components which suits best to produce packaging products including fertilizer bags, raffia tape stretch line for safe and moisture free packing of cement, rice, chemicals, fertilizers, etc. This machine can also make raffia fabric tapes to make ropes and yarns.
| Features : Raffia Tape Stretching Plant | ||
|
| Raffia Tape Stretching Plant MODEL for Plastic Extrusion | Tape Plant OES 70-150 | Tape Plant OES 75-200 | Tape Plant OES 80-250 | Tape Plant OES 90-350 | Tape Plant OES 100-400 | Tape Plant OES 100-450 | Tape Plant OES 120-550 |
| SCREW Die (MM) | 70 | 75 | 80 | 90 | 100 | 110 | 120 |
| L/D Ratio | 32:1 | 32:1 | 32:1 | 32:1 | 32:1 | 32:1 | 32:1 |
| Die Width (MM) | 800 | 900 | 1100 | 1300 | 1300 | 1500 | 1600 |
| Max. Output PP (KG/Hr.) HDPE |
150 135 |
200 170 |
250 230 |
350 - |
400 - |
450 - |
550 - |
| Mani Drive | 45KW | 56KW | 75KW | 110KW | 110KW | 150KW | 150KW |
| NO of Cheese Winder | 130 Nos. | 150 Nos. | 180 Nos. | 220 Nos. | 220 Nos. | 255 Nos. | 270 Nos. |
| Max. Line Speed (MPM) | 280 | 280 | 350 | 350 | 350 | 350 | 350 |
| Total Connected Load With inverter Winder |
149.77 KW | 181.37 KW | 206.07 KW | 293.72 KW | 303.52 KW | 371.15 KW | 408.45 KW |
| Tape Plant Dimension with Winders (MM) | 25152 (L) 3925 (W} 5280 (H) |
2575(L) 3925(W) 5280(H) |
27435(L) 3925(W) 5280(H) |
28825(L) 3925(W) 5380(H) |
28825(L) 3925(W} 5380(H) |
31370(L) 3925(W) 5380(H) |
31885(L) 3925(W) 5380(H) |
| Plastic Recycling Plant such as Plastic Reprocess Plant, Die Face Cutter, Air Cooled Recycling Machine, Water Ring Die Face Cutter. Die Face Cutter Reprocess Plant is the process of recovering scrap or waste PLASTIC and reprocessing the material into useful products. This helps to reduce the high rates of plastic pollution. Die Face Cutter Reprocess Plant includes taking any type of plastic sorting it into different polymers and then chipping it and then melting it down into pellets after this stage it can then be used to make items of any kind such as plastic chairs and tables. Soft Plastics are also recycled such as polyethylene film and bags. Another barrier to recycling is the widespread use of dyes, fillers , and other additives in plastics. The polymer is generally too viscous to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags , allowing them to be recycled more often. The percentage of plastic that can be fully recycled, rather than down cycled or go to waste can be increased when manufacturers of packaged goods minimize mixing of packaging materials and eliminate contaminants. The Association of Plastics Recyclers have issued a Design Guide for Recyclability. | |||
|
| Model | Screw Size | Material | Output | Connected Load | Dimension | ||
| OEPLDC-80 | 80 MM | LD | 100 KG/HR | 36 KW | 40X6X18 | ||
| OEPLDC-90 | 90 MM | LD | 150 KG/HR | 42 KW | 45X6X20 | ||
| OEPLDC-100 | 100 MM | LD | 200 KG/HR | 50 KW | 45X6X20 |
| Product Range:20 Litres to 100 Litres 25 Litres (Accumulator Type) Blow Molding Machine | |||
| Machine Features: | |||
| Perfect melt Quality with Higher Output. Extruder with up/down Movement Manual (Standard) / Motorized (optional). Inbuilt Thrust Helical Gear Box for Required torque. A.C. Motor with VFD for Variable Speed of Extruder.Accumulator type FIFO parison Die.Higher Production with Lower Power Consumption Pneumatic Parison Stretching Unit for Rectangle Jerry Canes. On/Off type Multi Points Hydraulic Parison Thickness Control. | |||
|
| MACHINE MODEL | UNIT | OEPLBM-25 | OEPLBM-50 | OEPLBM-75 | OEPLBM-100 |
| EXTRUDER | 65M | 75L | 90S | 90M | |
| Screw Diameter | mm | 65 | 75 | 90 | 90 |
| Length/Diameter Ratio | l/d | 24:1 | 26:1 | 21:1 | 24:1 |
| Maximum Plasticizing Capacity HDPE | kg/hr | 90-100 | 130-135 | 155-170 | 180-200 |
| Barrel Heating Load | kw | 13 | 19 | 35 | 40 |
| Screw Speed Range HDPE | rpm | 10-100 | 12-120 | 10-100 | 10-100 |
| Thyristor Controlled AC Motor AT 1500 RPM | kw | 18.5 | 37.5 | 37.5 | 45 |
| ACCUMULATOR CAPACITY | kg | 2 | 6 | 9 | 9 |
| Die Heating Load | kw | 16 | 22 | 28 | 28 |
| MOULD DIMENSION | |||||
| Height (Maximum) | mm | 600 | 750 | 875 | 1000 |
| Width | mm | 850 | 850 | 900 | 950 |
| Thickness (Minimum) | mm | 2x155 | 2x225 | 2x225 | 2x225 |
| CLAMPING UNIT | |||||
| Clamping Force (Maximum) | mt | 14.25 | 17.25 | 50.25 | 60.25 |
| Daylight (Maximum) | mm | 800 | 1100 | 1250 | 1350 |
| Mould Opening Stroke | mm | 2x150 | 2x330 | 2x450 | 2x450 |
| Daylight (Minimum) | mm | 2x150 | 2x220 | 2x220 | 2x220 |
| HYDRAULIC UNIT | |||||
| Opening Pressure | kg/cm2 | 150 | 150 | 150 | 150 |
| Drive Power, Hydraulic Pump | kw | 15 | 18.5 | 37.5 | 37.5 |
| Oil Tank Capacity | ltr | 350 | 350 | 850 | 850 |
| INSTALLED TOTAL ELECTRIC POWER APPROX. | kw | 63 | 97 | 139 | 149 |
| MACHINE INSTALLATION | |||||
| Floor Space (LxWxH) (Approx) | m | 5.0x5.0x4.0 | 5.5x5.5x4.5 | 6.5x6.5x5.0 | 7.5x6.5x5.0 |
| Net Weight (Approx) | mt | 8.5 | 9 | 9.5 | 10.5 |
| Utilities | |||||
| Air Consumption | lpm | 350-550 | 350-550 | 350-550 | 350-550 |
| Air Pressure | kg/cm2 | 8-10 | 8-10 | 8-10 | 8-10 |
| Water Consumption at 28 C | lpm | 100-120 | 100-120 | 140-160 | 140-160 |
| Water Pressure | kg/cm2 | 3-4 | 3-4 | 3-4 | 3-4 |
| MAXIMUM VOLUME FOR SINGLE CAVITY | 25 | 50 | 75 | 100 |
Ocean Extrusions Pvt Ltd introduces a line capable of sorting, grinding, washing and cleaning with drying post consumer plastic waste. The end use of the plastic waste is supposed to be either in the field of injection molding textile fiber, monofilament or sheet with different thickness for thermoforming. The complete line is for an accurate clearing of plastic material specially suited for LLDPE, LDPE, PP, Etc.
OEPLs washing line are build with the best materials for less wearing of the bodies of the machine and consequentially less maintenance and less lost in time. Also the experience of OEPL has developed with a better price.
OEPLs engineering department can give to their customers the support on finding also a customized solution, because OEPL know that every country has his own traditions and his own post consumer material to treat. For this we will be glad to give you the right solution for your business.
The LD/PP film washing line is used to crush, wash and dry the waste plastic PE/PP films, for example, package films, Agricultural films, plastic mulch, plastic films bags and woven bags. By the processing of PE/PP film washing line, the dirties such as sands, soil and mud can be washed out well. And the clean films can be used for plastic pelletizing directly.
1 high working efficiency, less energy consumption; high automation, less man power.
2 heavy crusher with 10pcs rotary blades efficient cutting
3 By multiple friction washing and rinsing washing, the dirty such oil contamination and mud can be washed out fully.
4 reasonable flowchart design for convenient operation and lower maintenance cost.
5 whole solution for sewage water recycling.
6 the rinsing tank, screw feeders, pipelines are made of stainless steel.
At present, we have the standard models with capacities from 200kg/hr to 1000kg/hr for the plastic pe/pp film washing line, But the final proposal maybe some different because of the different materials conditions.
| Product capacity | 300kg/h | 500kg/h | 1000kg/h | 1500kg/h |
| Workshop(L*W*H) | 40m*7.5m*6m | 42m*10m*6m | 70m*12m*6m | 75m*15m*6m |
| Needed worker | 3-4 persons | 5-6persons | 7-8persons | 10-12persons |
| Water supply
(recycle use) |
2-3ton/h | 3-5ton/h | 7-10ton/h | 10-15ton/h |
| Final product |
Moisture: max 1% Bulk density: 0.3G/CM3 Particle size: 10-18mm Metal content: max.20ppm Floatable contamination: less than 200ppm Total impurity: 100-320ppm |
|||
| Stretch Film Making Machine (Cast Line) produced on chill roll lines have become an indispensable product in the packaging industry. They provide versatile and high-quality options for safe and economic packaging of products. To manufacture multi-ply packaging materials of 15 to 150 microns thickness, such as Stretch films, Cling films, Barrier films, Masking films, CPP films and Blister films. The Stretch Film Making Machine (Cast Line) process is gaining increased popularity and enjoying sustained growth worldwide. New lines are being installed in a significant number and the market segments penetrated by this technology are on the rise. This article identifies the main components of a cast extrusion line and presents the fundamental aspects that require consideration when approaching cast film technology. |
| Applications |
|
| Benefits/Limitations of Cast Film Extrusion Machine |
| In cast extrusion the edges of the film are trimmed due to dimensional irregularities and/or poor layer distribution. As a result, the process can be negatively affected if the trimmed material cannot be recycled. Recent flat die system technology has minimized this problem by significantly reducing the amount of wasted material in extrusion processes. This subject will be covered to some extent in a subsequent section and the rigidity of the EVOH limits the thickness of the EVOH layer. The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages: Good tensile strength Superior anti-pricking ability High transparency Good ductility and anti-impact strength Stable sticky sides etc. Outstanding Features of Stretch Cling Film Machine Higher output with stable quality stretch film, superior than the same suppliers more than 30%. Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output. Good water cooling effect and imported die steel to ensure making even and good ductility stretch film. Swing system installed to adjust the film thickness and evenness. The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly. PLC controlled, fully automatic. Packaging Condition of Stretch Cling Film Machine: 1) Packed fully with EPE foam, blanketry and stretch film. 2) Wire netting fastened at the bottom of the container. |
| Ocean offers various models for palletizing plant to make granules form resin in various range in screw diameter 75mm, 90mm and 100mm with / without vent system screw and barrel, die and pattletizer. This plastic reprocess machine is used to process PET and polyethylene plastic waste to recover the scraps and byproducts at the end of plastic fabrication. PET reprocess plant and PE reprocess plant are the two extrusion machineries with plastic extruder are widely used in plastic extrusion process. Reducing plastic wastes by recycling process is a great help to save environment. There are list of re process plant than can be chosen from and PP/HDPE reprocess machine is one among the best choices. PP/HDPE reprocess plant can be fed with plastic and raffia wastes and this plastic reprocess machinery stays a cost effective solution that can be applied to make quality ropes, molded components and yarns. This equipment is compatible to accept ingredients including BOPP waste, HDPE wastes and polypropylene residues as well. |
| Plant Model |
Screw Size (mm) | Screw Size L7d Ratio | Feed Section Type | MAX PROD CAPACITY (KGS/HOUR) | TOTAL CONNECTED LOAD (KW W/OGRINDER) | POLYMER | MAIN DRIVE (HP) | DIMENSION OF PLANT (FEET) |
||
| L | M | H | ||||||||
| OESRP100 | 80 | 24:1 | Smooth Feed | 100 | 36 | PET | 25 | 40 | 6 | 18 |
| OESRP100 | 90 | - | Smooth Feed | 150 | - | PET | 40 | 45 | 6 | 20 |
| OESRP100 | 100 | - | Smooth Feed | 200 | - | PET | 50 | 45 | 6 | 20 |
| Ocean has developed High-tech Box Strapping Plant to produce straps from PP / HDPE / PET, suitable for manual and heat-sealing straps. Ocean also offers plants for single line, two lines, three lines and four lines straps with width of 6mm, 9mm, 12mm, 16mm and 19mm. Also offers Co-Extrusion Plants for two layer or lining on straps with high production range from 35kg to 150 kg/hrs capacity. PP/PET box strapping plant is a perfect solution for packaging requisites in industries which make use of box strapping technology. PP box strapping plant is suitable for higher productivity and pp box strapping machine stays effective in producing different models and different dimensions of box strapping and pp box strapping line. PET box strapping machine is yet equipment that stays useful in making PET box strapping line which is them applied in production of box strapping. This material is a significant option while stuffing products like pipes, wooden crates, strapping of building materials, etc. PP-HDPE-PET Box strapping plant is used to manufacture manual straps, semi auto heat sealable straps and fully auto heat sealable straps for packaging applications is known as box strapping plant. Box strapping plant is available in various models like PP box strapping plant, PET box strapping plant and HDPE box strapping plant. PP box strapping plant is used in manufacturing PP straps. HDPE box strapping plant is used in manufacturing of HDPE straps and PET box strapping plant is used for manufacturing of PET straps. Plastic extrusion generates plastic sections of continuous length through plastic extruder. Plastic granules are melt by required elements through plastic extruder to form a furnished products. This process is carried out through various components of plasticextruderlike tubular barrel, plunger with the barrel, revolving screw and hopper |
| PLANT MODEL | SCREW SIZE (MM) | STRAP SIZE (MM) | MAX PRODUCTION CAPACITY (KG/HR) | TOTAL CONNECTED LOAD | DIMENSION OF PLANT | ||
| \t\VV / | L | W | H | ||||
| SEMI AUTO (HEAT SELABLE) STRAPPING PLANT | |||||||
| OESBX 50 | 50 | 9,12,16 Single Lines | 35 | 50 | 80 | 5 | 8 |
| OESBX 65 | 65 | 9,12-lwo Lines 16,19-single Lines | 60 | 65 | 90 | 6 | 8 |
| OESBX 75 | 75 | 9,12-three Lines 16,19-two Lines | 75 | 85 | 100 | 6 | 8 |
| FULLY AUTO STRAPPING PLANT | |||||||
| OESBX 50 | 50 | 9,12-16-single Lines | 35 | 60 | 90 | 6 | 10 |
| OESBX | 70 | 9,12-two Lines 16, 19-single Lines | 60 | 90 | 100 | 6 | 10 |
| PET BOX STRAPPING PLANT | |||||||
| OESPBX 75 | 75 | 9,12-Two Lines 15,19-Single Lines | 100 | 145 | 90 | 15 | 20 |
| OESPBX 80 | 80 | 9 - Three Lines 12, 15 - Two Lines, 19- Single Line | 150 | 175 | 95 | 15 | 20 |
rotogravure printing machine is used in flexible packaging manufacturing and printing process including polyester, nylon, bopp, foil, low and high density polyethylene polypro plane and paper with two sided printing facilities with high speed hot air dryers.
rotogravure printing machine is used in flexible packaging manufacturing and printing process including polyester, nylon, bopp, foil, low and high density polyethylene polypro plane and paper with two sided printing facilities with high speed hot air dryers. The high speed rotogravure printing machine has the great flexibilities and high resolution color combination at faster rate. The rotogravure printing machine is well designed for precision engineering for best industry standard requirements of valued clients with technical excellence, easy machine operations with good efficiency and performance, high durability and reliability with standard parts made from sturdy materials.
rotogravure printing machine is designed to support flexible packaging film manufacturing industry. Rotogravure print plant is an expert supplementary solution that can be added to the existing flexible packaging film plant as it can print on variety of materials including paper, flexible films, aluminum foils, etc. Rotogravure printing line is a suitable choice to print on lamination lines made of different ingredients. Investing on this supplementary machine is a favorable opportunity to reduce the cost of secondary packaging requirements.
note: the information of rotogravure printing machine is provided for the purpose of guideline & indication only and doesn't form any kind of commitments.
Ocean has developed "T" die string (sutli) plants/suitable for pp synthetic jute. Due to 'T' die system, machine gives high production of sutli. Cheese winder is provided in different width of coil as per the requirement of coil width of 40mm, 50mm, 600mm, 100mm, 150mm and 200mm. You can chhoose from screw dia of 40mm, 50m, 60mm, 75mm. The principal application of plastic string (sulti) is for loose packaging, tieing the corrugated boxes, small packaging, tieing of bags as a substitute of jute sutli and twisted rope making
With Synthetic string plant bulk production of plastic string can be done. Plastic string is applied for exterior loose packaging. Sutli machine or synthetic string machine is a reliable choice of machine that can produce twisted plastic strings and synthetic string lines which are then applied in the place of conventional jute strings. Synthetic string lines produced from sutli plant are much stronger than other conventional materials. This equipment is a cost effective option for making large quantity of strings and line materials.
| Plant Model | Screw Size (Mm) | Screw Size L7d | Feed Section Type | Die Width (Mm) | No. Of Station Winder | Max Production Capacity | Total Connected Load | Polymer To Be Processed | Dimensions Of Plant (Feet) | |||
| Ratio | T W II luvl | Kg/hr. | (Kw) | L | W | H | ||||||
| OES 40 | 40 | 28: | 1 | Smooth Feed | 250 | 8 | 20 | 25 | PP | 40 | 8 | 8 |
| OES 50 | 50 | 28: | 1 | Smooth Feed | 350 | 12 | 35 | 31 | PP | 45 | 8 | 8 |
| OES 65 | 65 | 28: | 1 | Smooth Feed | 500 | 18 | 60 | 43.5 | PP | 60 | 10 | 8 |
| OES 75 | 75 | 28: | 1 | Smooth Feed | 700 | 24 | 100 | 66 | PP | 70 | 12 | 10 |
| OES 90 | 90 | 28: | 1 | Smooth Feed | 900 | 36 | 140 | 91 | PP | 90 | 20 | 10 |
Slitter rewinder machine is a special device created for slitting different kinds of flexible packaging film materials including PET, PE, PVC, paper rolls, etc. Slitter rewinder plant is equipped with high rewind and unwind control panel and it is motor driven. This machine requires less manual support and the independent roller installed with rewinder control system remains effective for flawless rewinding. Similarly, slitter rewinder line can also be produced at affordable investment.
| Slitter Rewinder Machine - PLANT MODEL | WORKING | UNWINDER | REWINDER | WORKING |
| WIDTH | DIAMETER | DIAMETER | SPEED | |
| (MM) | (MM) | (MM) | (MTR) | |
| OESDHM DSM 0018 | 500-2000 | 800-1000 | 1000 | 150-200 |
| OESDHM DSM 0019 | 500-2000 | 800-1000 | 650 | 150-200 |
| OESDHM DSM 0020 | 500-2000 | 800-1000 | 450 | 150-200 |
Technical Specification
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(kw) |
L |
W |
H |
|||||
|
OESCOBL 50-50 |
50-50 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
Plastic Extrusion Machinery Manufacturer & Exporter, having core expertise in comprehensive range of Extrusion Machinery for Plastic including Plastic Extruder such as Multi Layer Blown Film Plant, Mono Layer Blown Film Plant, Two Layer Blown Film Plant, Air Bubble Sheet Plant, Raffia Tape Stretching Plant, Extrusion Coating Lamination Plant, Co-Extrusion Blown Film Plant, PP-TQ Blown Film Plant, PVC Blown Film Plant, PPHDPE Monofilament Plant, Synthetic String (Sutli) Making Plant, PP Box Strapping Line, HDPE Box Strapping Line, PET Box Strapping Line, HDPE Blow Molding Machine, PPLD Reprocessing Granules Making Machine, PPLD Waste Washing Line, Die Face Cutter Reprocess Plant, Mother Baby Reprocess Plant, PET Reprocess Granules Making Machine, PET Waste Washing Line, Cast Stretch Film Making Plant. Ocean extrusions Pvt. Ltd. is a well known trusted name for providing customized solutions of Plastic Extrusion Machinery.
