Nynex Exports

Girgaon, Mumbai, Maharashtra

Finish :

• Seamless Welded Brushed Pickled Solution
• Annealed and Pickled up to O.D. 219.1mm
• Polished Grit 120 – 600 Mirror Polished

Range : 1/2″NB TO 48″NB IN SCH: 20, 30, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

 

Form :

• Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg. Equal, Unequal Tee & Barred Tee.
• Eccentric Reducer & Concentric Reducer. Caps & Crosses.
• Long & Short Stub End.
• Swage Nipple & Barrel Nipple.

 

Standard : ASTM / ASME A/SA 234, ASTM / ASME SB 336

 

Grade : UNS 2200 (Nickel 200 Elbow) , UNS 2201 (Nickel 201 Elbow) , UNS 4400 (Monel 400 Elbow) , UNS 8020 (ALLOY 20 / 20) CB 3 , UNS 8825 Inconel (825 Elbow) , UNS 6600 (Inconel 600 Elbow) , UNS 6601 (Inconel 601 Elbow) , UNS 6625 (Inconel 625 Elbow) , UNS 10276 (Hastelloy C 276 Elbow)

Form : Elbow – 90 Deg. & 45 Deg, Tee – Equal & Reducing, Union, Cross, Coupling – Full & Half, Socket Reducing, CAP, Plug-Hex & Square, Nipples (Hex/Reducing), Bushing, Sockolet, Weldolet, Thredolet, Elbolet, Nipolet

Standard : ASTM / ASME SB 564

Grade : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750

Range : 15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS.

Form : Seamless / Erw / Welded in Round & Square.

Stainless Steel :

• ASTM / ASME SA 312 GR. TP 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316TI , 316H , 316 LN , 317 , 317L , 321 , 321H , 347 , 347 H , 904L .
• ASTM / ASME SA 358 CL 1 & CL 3 GR . 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316H , 321 , 321H , 347 .

Duplex Steel : ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.

Range : 15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS

Form : Seamless / Erw / Welded in Round & Square.

Carbon Steel :

• ASTM / ASME A 53 GR. A , B
• ASTM / ASME 106 GR. A , B , C .
• API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70.
• ASTM / ASME A 691 GRA , B , C

Alloy Steel :

• ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
• ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.

Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS

Type : Seamless / Erw / Welded/ Fabricated

Standard : ASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751

This range is used in :

• Petrochemicals Plants
• Oil Refineries
• Fertilizers Plants
• Sugar Mills
• Chemical Plants
• Pharmaceuticals
• Textile Machinery

Type : Seamless / Erw / Welded/ Fabricated

Form :  Round, Square, Rectangular, Hydraulic etc.

 

Details :

• Length -Single Random, Double Random & Cut Length
• End - Plain End, Beveled End, Threaded

The salient features are as follows :

• Hot Dipped Galvanizing
• Epoxy & Fbe Coating
• Electro Polish
• Draw & Expansion

Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23

Type : Seamless / Erw / Welded/ Fabricated

Range : 15 NB UP TO 600 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 etc.

Form :

• Round, square, rectangular, hydraulic etc.
• Length Single Random, Double Ranidom & Cut Length
• End Plain End, Bevelled End, Treaded

Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23

Range : 15 NB up to 1500 NB in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS available with NACE MR 01-75

Standard : ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

Types : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint

Features :

• Dimensional accuracy
• High strength
• Durability
• Corrosion resistance
• Excellent finish

Range : 0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s.

Stainless Steel : ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430

Duplex Steel : ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760

Sheet and Plates Range : 5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75s.

Nickel Alloy :

• Astm / Asme Sb 162 Uns 2200 ( Nickel 200 ) / Uns 2201 (nickel 201 )
• Astm / Asme Sb 127uns 4400 (monel 400 )
• Astm / Asme Sb 424 Uns 8825 (inconel 825)
• Astm / Asme Sb 168uns 6600 (inconel 600 ) / Uns 6601 ( Inconel 601 )
• Astm / Asme Sb 443 Uns 6625 (inconel 625)
• Astm / Asme Sb 574 Uns 10276 ( Hastelloy C 276 )
• Astm / Asme Sb 462 Uns 8020 ( Alloy 20 / 20 Cb 3 )

Sheet and Plates Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS

Type : Seamless / Erw / Welded/ Fabricated

Standard : ASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751

This range is used in :

• Petrochemicals Plants
• Oil Refineries
• Fertilizers Plants
• Sugar Mills
• Chemical Plants
• Pharmaceuticals
• Textile Machinery

Sheet and Plates Specifications :

• Hot and coll rolled, Gr1Gr23
• Thickness - 0.3mm – 60mm
• Length - 6000mm
• ASTM B265, ASTM 4911, F67, F136
• Material - Titanium and titanium alloys
• Pure Titanium Grade - GR1, GR2, GR3, GR4
• Titanium Alloy Grade - GR5 (6% Al, 4%V)
• GR6 (5% AL, 2.5%Sn)
• Gr.7 (Titanium + Pd)
• Gr.9 (3% Al, 2.5%V)
• Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn)
• Gr.11 (Titanium + Pd)
• Gr.12 (0.3% Mo, 0.8% Ni)

We are factory specializing in the manufacture and export Tantalum and Niobium prodcut for more than ten years, Including foil tube , rod, wire, sheet, plate, , rod, strip, target and so on We can supply the best quallity and low price. Tantalum sheets, Tantalum- tungsten alloy sheets(Ta2.5W, Ta10W)

 

Specifications :

• Tantalum sheet, tantalum plate, tantalum foil
• Grade - RO5200, Ro5400, RO5252, RO5255
• Standard - ASTM B708-98
• Purity - 99.95%min or 99.99%min conformity with ASTM B 708 98

We are backed by a modern transportation facility that ensures safe delivery of the orders at required destinations. We are a quality-centralized firm and make use of only high quality material for manufacturing the offered lot. Also, we ensure that the material is sourced from the reliable places.

With the assistance of advanced machines, equipment and quality packing material, we pack the products in safe and rapid manner. In addition, we make sure that the entire lot is checked before dispatch. We stock our product for wholesale distribution and supply as we have state-of-the-art storage facility along with the most advanced inventory management system and upgraded machines.

Perforated Metal Check List :

• Material type and grade
• Hole shape
• Hole size
• Pitch dimension
• Pitch configuration
• Size of sheet or coil
• Gauge of material
• Number of sheets
• Free area
• Margins or un perforated areas
• Ancillary work, e.g. Bolt Hole, Notching, Forming etc