Monotech Engineers P Limited

Ghaziabad, Ghaziabad, Uttar Pradesh

The Hydraulic Shearing Machines are designed from ultrasonically tested IS 2062 grade steel structures. Robust construction gives more rigidity & strength to machines. These machines are capable to perform the accurate and precise cutting needs. The specially designed compact manifolds give smooth and silent operation.

Range: 3 mm to 25 mm  Length: 1250 mm to 7000 mm Hydraulics Shearing Machine.

Standard Feature Accessories:

• Main drive standard make motor
• Electrical control panel with three speed inch, single cycle, Auto mode of operation.
• Two front sheet supports
• Manual back gauge with micro-adjustment swing stoppers. pair of lifting chains.
• fine stroke adjustment rod with limit switches.
• One suitable 5 way die and blade.
• (segmented for full length, EN-9 not covered under warranty)
• Moveble console with emergency stop.
• Tonnage indicating - adjustment device.
• Manual centralized lubrication system with hand pump.
• Bending chart.

Features

• Mono Block Welded Steel Frame ultra tested-2062
• Steel plates rigid to provide Accurate bending.
• All pivots have hardened of ground pin bushes of five
• Piece guide slide lubricated by central hand pump
• Repetitive accuracy is within +0.03mm Ram travel parallelism with out using sensitive & complex servo Hydraulics.
• Most reliable Hydraulic components & sealing for international reputed design for 350 bar against operating pressire of 160 bar maximum.
• Three cycles operation inch, Single cycle&Auto for grater operator convenience.
• Three speed operation reduces ideal travel time which improves productivity.
• Bending force easily adjustable From front for forging tool of bending material.

NC Press brakes are economical and very reliable solution for industry demand. NC hydraulic press brakes are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen.

The Numeric Control is used for Two Axis Control:1. Ram Axis Y2. Back Gauge Axis X
The program gives facility to bend different bending degrees; different back gauge positions & different open positions. It has a facility to save different programs and same can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive.

Range: 20MT to 600MT  Length: 1250 mm to 4000 mm.

Product Features

• • It has a facility to program the assorted jobs includes complex bending sequence.
• • This facility helps to perform complicated bending job in a signal setting and repeatable production.
• • Dedicated controller with LCD monochrome screen & numeric keypad.
• • Bend angle & Depth Mode program.
• • 128 Programs x 16 bends per program can be stored.
• • Stroke control and stroke counter on screen.
• • Highly Precise press brake scale for accurate Y- axis positioning.
• • AC Servo drive for back gauge positioning.
• • Hardened ground Balls screwand linear motion bearing for better position accuracy and longer life.
• • Ram tilting to maintain banding accuracy over period.

CNC Press Brakes

CNC press brakes are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen. The CNC Control is used for Three Axis Control or more:

• Synchronized Ram Axes Y1 & Y2.
• Back Gauge Axis X.

Additional Axis Provided R axis Z1 & Z2

The program gives facility to bend different bending degrees; different back gauge positions & different open positions. It has a facility to save different programs and it can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive.
The machine can be equipped with some high-end optional accessories like:
• Back gauge Axis X1, X2, R & Z.
• Anti- Deflection units.
• Special profile Hardened Dies & Punch.

Product Features:

• • World class dedicated controller from Delemor Cybelec.
• • 3 or more axis control i.e. ram axis Y1, Y2 & Back gauge axis x.
• • Bend angle & Depth Mode program.
• • Highly Precise press brake scale for Y1, Y2 axis.
• • Close loop proportional hydraulics for ram synchronization.
• • Zero leak sealing of hydraulic cylinders.
• • Hardened & ground Multi Die & Punch.

The Hydraulic Shearing Machines are designed from ultrasonically tested IS 2062 grade steel structures. Robust construction gives more rigidity & strength to machines. These machines are capable to perform the accurate and precise cutting.The specially designed compact manifolds give smooth and silent operation.

Mechanical Press Brakes are used to bend sheets and metal plates. Monotech Engineers has carved a niche in manufacturing and supplying an exclusive range of press brakes. Fabricated using supreme quality raw material, these machines also comprise of safety interlock construction and has a bed that helps support the side walls for accuracy and alignment.

In order to fulfill the ever changing demands of our clients, we have been engaged in offering a quality range of Mechanical Power Presses. Manufactured using optimum quality raw material and advanced technology, the presses offered by us are known for their high performance and easy installation.

C Frame Mechanical Power Press

NC shearing machine has all the advantages of hydraulic shearing machine. The NC controller adds some more special advantage to machine. The fast and accurate multi position back gauge system is very efficient and accurate. The machine productivity and accuracy are much improved with NC controlled back gauge.

Range: 1 mm to 32 mm  Length: 1250 mm to 6000 mm.

Product Features

• Variable Rake Angle Design Machines.
• Better cutting accuracy in thin sheets at lower rake angle.
• Higher cutting capacity at maximum rake angle.
• Low noise & smooth operation gives higher efficiency of operator.
• Automatic Rake angle adjustment.
• Pre-calibrated easy blade gap adjustment.
• Multi-steps automatic back gauge program.
• AC Servo Drive & Timer belt for Back Gauge Movement.
• Hardened & ground ball screw with linear motion bearings.
• Stroke counting on screen.
• Fast production on smaller jobs.
• Front sheet support.
• Squaring arm with steel rule for front gauging.
• Hardened Transfer bars mounted on table.
• Hold down cylinders.
• Cutting area illuminated for clear view of blades.
• Four edgeHCHCr Blade suitable to cut MS & SS or any special material.

Mototech Engineers is a trusted manufacturer and supplier of high-quality CNC Shearing Machine designed with an in-built power pack and rapid blade gap adjustment. It’s easy to maintain, and have reliable hydraulic system. All our products are technologically advanced, are made by high-quality crude material, and sold only after passing stringent quality tests.