Product / Services
Post Buy Requirement
NE

NSK Electronics
Chickpet, Bangalore, Karnataka

Write a Review
Call Now Call Now

Our Products

  1. Sensors

    2 Products available

  2. Electric Circuit Components & Parts

    1 Products available

  3. Security Alarms & Devices

    1 Products available

  4. Router, Cables & Networking Devices

    1 Products available

  5. LED Displays

    1 Products available

  6. Inverters, UPS & Converters

    1 Products available

  7. Electronic Development Boards

    1 Products available

  8. Relays & Contactors

    1 Products available

Our Products

gsm security system

Gsm Security System
GSM Based Home Security System adopts voice dais of GSM network to send control command and receive alarm distantly. When a signal is perceived by detectors, the detectors will send an alarm signal to system right away. The system then sends alarm to its pre-set mobile phone numbers, and temporarily dials the pre-set telephonemobile phone numbers spontaneously.
View Complete Details
Ask Latest Price & Details
Converter Module

Converter Module
  • Color Blue + black
  • Material PCB + metal
The PCF8591 is a single-chip, single-supply low power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface, Three address pins A0, A1 and A2 are used for programming the hardware address, allowing the use of up to eight devices connected to the I2C-bus without additional hardware, Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus
View Complete Details
Ask Latest Price & Details
Channel Relay Board

Channel Relay Board
  • power supply. 12V AC
Remote operating range up to Visible distance.Each relays can Switch On or OFF.Receiver Indicates output status by LED.Receiver operates from 12V AC or DC power supply.Relay contact are brought out as ScrewTerminal.Applications Garage door controllers, Home Automation and Robotics.
View Complete Details
Ask Latest Price & Details
fire sensor

Fire Sensor
  • Maximum Range 1 m
  • Input Voltage +5VDC
The Fire sensor is used to detect fire flames . The module makes use of Fire sensor and comparator to detect fire up to a range of 1 meters. Allows your robot to detect flames from upto 1 M away,
View Complete Details
Ask Latest Price & Details
GSM/GPRS Modem

GSM/GPRS Modem
  • size 15.8*17.8*2.4 mm
SIM800A is a complete GSMGPRS solution in a LGA type which can be embedded in the customer applications. SIM800H support Quad-band 85090018001900MHz, it can transmit Voice, SMS and data information with low power consumption. With tiny size of 15.8*17.8*2.4 mm, it can fit into slim and compact demands of customer design. Featuring and Embedded AT, it allows total cost savings and fast time-to-market for customer applications.
View Complete Details
Ask Latest Price & Details
Slot Sensor

Slot Sensor
  • Slot width 3mm
  • Slot depth 7mm
  • Mounting hole spacing 19mm
MOC7811 is a slotted Opto isolator module, with an IR transmitter & a photodiode mounted on it. Performs Non-Contact Object Sensing. This is normally used as positional sensor switch (limit switch) or as Position Encoder sensors used to find position of the wheel. It consists of IR LED and Photodiode mounted facing each other enclosed in plastic body.
View Complete Details
Ask Latest Price & Details
LED Dot-Matrix Display

LED Dot-Matrix Display
  • configurations available 7×5, 8×8, 7×15
An LED dot matrix display consists of a matrix of LEDs arranged in a rectangular configuration. The desired character or graphics can be displayed by switching ON OFF a desired configuration of LEDs. Common display configurations available are 75, 88, 715, etc. LED dot matrix can be used in simple display applications where the resolution is not a big concern. The figure below shows the arrangement of LEDs in a typical 75 dot matrix display.Any individual LED or a group of LEDs in the matrix can be activated by switching the required number of rows and columns.
View Complete Details
Ask Latest Price & Details
Avr Development Board

Avr Development Board
  • Multiplexed Display 7Seg
A general purpose 40 pin avr development board with on board power supply circuit, RS232 port for serial interface with computer and other serial devices, reset switch, power status LED and a general purpose switch and LED.The bridge rectifier allows this board to be powered with both AC and DC power supply adapters.
View Complete Details
Ask Latest Price & Details
Pic Development Board

Pic Development Board
  • Power 5v, 12v
PIC Development Board for Microchip PIC Series For any 40 Pin series 16FXXX , 18FXXX (EX 16F877A - 40 pin).ICSP Socket for Programming through PICKIT2, On board Regulated Power- Optional Supply 5v, 12v supplies.With this board you can develop and prototype with any of Microchip's 40 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware, The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.
Browse Our Products list of NSK Electronics Bangalore, Karnataka
Product / Services
Post Buy Requirement
NE

NSK Electronics
Chickpet, Bangalore, Karnataka

Write a Review
Call Now Call Now

Our Products

  1. Sensors

    2 Products available

  2. Electric Circuit Components & Parts

    1 Products available

  3. Security Alarms & Devices

    1 Products available

  4. Router, Cables & Networking Devices

    1 Products available

  5. LED Displays

    1 Products available

  6. Inverters, UPS & Converters

    1 Products available

  7. Electronic Development Boards

    1 Products available

  8. Relays & Contactors

    1 Products available

Our Products

gsm security system

Gsm Security System
GSM Based Home Security System adopts voice dais of GSM network to send control command and receive alarm distantly. When a signal is perceived by detectors, the detectors will send an alarm signal to system right away. The system then sends alarm to its pre-set mobile phone numbers, and temporarily dials the pre-set telephonemobile phone numbers spontaneously.
View Complete Details
Ask Latest Price & Details
Converter Module

Converter Module
  • Color Blue + black
  • Material PCB + metal
The PCF8591 is a single-chip, single-supply low power 8-bit CMOS data acquisition device with four analog inputs, one analog output and a serial I2C-bus interface, Three address pins A0, A1 and A2 are used for programming the hardware address, allowing the use of up to eight devices connected to the I2C-bus without additional hardware, Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus
View Complete Details
Ask Latest Price & Details
Channel Relay Board

Channel Relay Board
  • power supply. 12V AC
Remote operating range up to Visible distance.Each relays can Switch On or OFF.Receiver Indicates output status by LED.Receiver operates from 12V AC or DC power supply.Relay contact are brought out as ScrewTerminal.Applications Garage door controllers, Home Automation and Robotics.
View Complete Details
Ask Latest Price & Details
fire sensor

Fire Sensor
  • Maximum Range 1 m
  • Input Voltage +5VDC
The Fire sensor is used to detect fire flames . The module makes use of Fire sensor and comparator to detect fire up to a range of 1 meters. Allows your robot to detect flames from upto 1 M away,
View Complete Details
Ask Latest Price & Details
GSM/GPRS Modem

GSM/GPRS Modem
  • size 15.8*17.8*2.4 mm
SIM800A is a complete GSMGPRS solution in a LGA type which can be embedded in the customer applications. SIM800H support Quad-band 85090018001900MHz, it can transmit Voice, SMS and data information with low power consumption. With tiny size of 15.8*17.8*2.4 mm, it can fit into slim and compact demands of customer design. Featuring and Embedded AT, it allows total cost savings and fast time-to-market for customer applications.
View Complete Details
Ask Latest Price & Details
Slot Sensor

Slot Sensor
  • Slot width 3mm
  • Slot depth 7mm
  • Mounting hole spacing 19mm
MOC7811 is a slotted Opto isolator module, with an IR transmitter & a photodiode mounted on it. Performs Non-Contact Object Sensing. This is normally used as positional sensor switch (limit switch) or as Position Encoder sensors used to find position of the wheel. It consists of IR LED and Photodiode mounted facing each other enclosed in plastic body.
View Complete Details
Ask Latest Price & Details
LED Dot-Matrix Display

LED Dot-Matrix Display
  • configurations available 7×5, 8×8, 7×15
An LED dot matrix display consists of a matrix of LEDs arranged in a rectangular configuration. The desired character or graphics can be displayed by switching ON OFF a desired configuration of LEDs. Common display configurations available are 75, 88, 715, etc. LED dot matrix can be used in simple display applications where the resolution is not a big concern. The figure below shows the arrangement of LEDs in a typical 75 dot matrix display.Any individual LED or a group of LEDs in the matrix can be activated by switching the required number of rows and columns.
View Complete Details
Ask Latest Price & Details
Avr Development Board

Avr Development Board
  • Multiplexed Display 7Seg
A general purpose 40 pin avr development board with on board power supply circuit, RS232 port for serial interface with computer and other serial devices, reset switch, power status LED and a general purpose switch and LED.The bridge rectifier allows this board to be powered with both AC and DC power supply adapters.
View Complete Details
Ask Latest Price & Details
Pic Development Board

Pic Development Board
  • Power 5v, 12v
PIC Development Board for Microchip PIC Series For any 40 Pin series 16FXXX , 18FXXX (EX 16F877A - 40 pin).ICSP Socket for Programming through PICKIT2, On board Regulated Power- Optional Supply 5v, 12v supplies.With this board you can develop and prototype with any of Microchip's 40 pin PIC microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware, The board have User buttons and status LEDs. The bridge rectifire allow this board to be powered with both AC and DC power supply adapters.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.