MAKE : NRG GLOBAL

HSN CODE : 90261020

TYPE : MAGETIC FLOAT TYPE

NAME OF THE FLUID : LIQUID

Temperature : Max 100 deg C

Pressure : 2-3 kg/cm2

Sp Gr / Density : 0.3 2.0

Viscosity : 0.7-10 Cp

WETTED PARTS (MOC) : SS 304

FLOAT : 2 NOS SS 316 OF 40 MM DIA

FLOAT STOPPER : SS 304

STEM PIPE : SS 304 OF 14 MM dia

CONNECTION SIZE : 1.5 ASA 150 # RF

CONNECTION MOC : SS 304 FLANGE

ENCLOSURE / HOUSING : ALLUMINIUM DIE CAST WEATHERPROOF

SWITCH : IMPORTED REED SWITCH

SWITCH CONTACT : NO , nc, com POTENTIAL FREE CONATCT 110 Vac 5 Amp

CABLE ENTRY : ET

NRG GLOBAL INSTRUMENTS MAKE TUBULAR LEVEL INDICATOR

• The Indicator is fitted between two end blocks through gland packings. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge.
• Guards are provided in the form of Tie-rods for 360 visibility or C- channels around the gauge to protect it from accidental blows.
• Glass removal for replacement possible w/o dismantling the gauge.
• 100% PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6 kg/cm service pressure.
• It is available in single length of 2000mm c/c distance. We can extend the length by coupling 2 or more through coupler.
• We are providing Air Vent plug at top & drain plug at bottom for taking sample.
• We can also provide inbuilt isolation valve or offset constructed isolation valve on request.
• The connection provided will be Flanged/Screwed/TC joint.

INTRODUCTION

NRG make Float & Board Level Indicators are designed for an accurate, reliable & trouble free float operated technique used in large non -pressurized storage tanks

Direct Indication

The Float & Board Level Indicators consists of a float connected to a pointer through a rope via a set of pulleys. The pointer glides over a calibrated gauge board, positioned parallel to the tank. The float accurately follows liquid level variations in vertical direction. The horizontal float movement is as such, the pointer in TOP POSITION when tank is EMPTY and in BOTTOM POSITION when FULL.

.NRG GLOBAL MAKE FLOAT & BOARD LEVEL INDICATOR

MAKE : NRG GLOBAL

HSN CODE : 90261020

TYPE : FLOAT & BOARD

FLUID : LIQUID

TEMPERATURE : 160^O C

PRESSURE : 10 Kg/Cm2

SPECIFIC GRAVITY / DENSITY : 0.8 -2.0 KG/M3

VISCOSITY (OP / MAX) : 0.7 20 Cp

MOC OF THE TANK : MS./SS/HDPE/FRP

CONNECTION FLANGE : MS SLIP ON TYPE

FLANGE SIZE : 25 nb ASA 150 # RF

SCALE : ALLUMINIUMPOWDER COATED HAVING SCREEN PRINTED AND 150 MM WIDTH

AND 1 MTR LONG WITH WHITE BACKGROUND AND BLACK MARKING WITH PVC LAMINATED

ZERO PLATE : ALUMINIUM POWDER COATED

LEAST COUNT : 10 MM

INDICATION IN : CM

FLOAT : SS 304 HAVING 12 DIA

FLOAT WIRE : SS 304 HAVING 2.5 MM DIA MULTITHRED

PULLEY & PIN : SS 304

PULLEY HOUSING : ALLUMINIUM DIE CAST DUST PROOF

TBRACKET FOR SCALE JOINT : MS T TYPE AT EVERY METER POWDER COATED

TOP BRACKET : MS L TYPE POWDER COATED

CHECKNUT AND CHECKNUT PIPE: MS

CENTER CONNECTING PIPE : MS TELESCOPIC PIPE HAVING ADJUSTABLE UP TO 700 MM LONG

AIRROW (INDICATOR) : MS POWDER COATED WITH PP ROLLER WITH RED REDIUM MARKING

ANCHOR PLATE : N.A.

ANCHOR HOUSING : N.A.

ANCHOR SPRING : N.A.

FASTENER : GI PLATED

HIGHT TO BE MEASURE : 6.0 MTR

ØNRG MAKE Electromagnetic Flow Meter  

                        MAKE                                      : NRG

                        HSN CODE                               : 90261020

                   LIQUID OF MEDIA                : WATER

                   Operating Pressure Max       : 15 KG/cm²  

                        Operating Temperature        : 40C  

                   MOC                                   : SS304

                   Electrode                             : SS 316

                        Flow Tube                            : SS 304 + ptfe lined

                   Lining                                  : Teflon (PTFE).

                   Working Conductivity             : Must be More than 5 Micro s./cm.

                   Process Connection                : Flange ASA 150# 

                   Mounting                            : In Line Horizontal.

                   Mounting Type                       : Integral

                   Input Supply                           : 230v Ac. 

                   Display                             : 9 Character X 2 Line LED With Blue Backlight.

                   Flow Rate                          : 4 Digits LED.

                   Total Flow                         : 9 Digits LED.

                   Enclosure                          : Flameproof Box  (4” Digisafe With 2NOS ¾”ET Entries )

                   Accuracy                            : +/-0.5% of F.S.

                   Output. Std.                      : 4 to 20mA.WITH RS 485

                    FLOW RANGE                     : 7 – 70 M3/HR

                    SIZE                                : 2.5” NB ASA 150 # RF

MAKE : NRG GLOBAL

HSN CODE : 9026

TYPE : U TUBE

Name of the Fluid : WATER

Temperature : 400 DEG C

Pressure : 1 KG/CM2

Specific Gravity / Density : 1.0

Viscosity : 1 Cp

M. RANGE : 250 - 0 - 250 MM WC

END BLOCK : SS304

End Connection : BSP-F

Tube Material : BOROSILICATE GLASS TUBE

Packing/O-Ring Material : NEOPRENE RUBBER

GLAND : SS304

BODY : SS304 BUFFING POLISH

BODY COVER : GLASS

Scale : SS304 ENGRAVED

Scale MARKING : IN MM WC

LEAST COUNT : 1 MM

Accuracy : 1% F.S.D.

MOUNTING : WALL MOUNTED

MAKE : NRG GLOBAL

HSN CODE : 90261020

TYPE : DOUBLE WINDOW

Name of the Fluid : LIQUID

Temperature : 230 DEG C

Pressure : 5 KG/CM2

MOC (WETTEC PARTS) : SS316 FABRICATED FROM SCH 10 PIPE

End Connection : SS316 FLANGE END

ROTOR : SS316

BASE PLATE : SS316

COVER PLATE : SS316

GLASS : BOROSILICATE TOUGHENED GLASS HAVING 12 MM THICK

Packing : VITON

FASTNERS : SS304

Process Connection : 32 NB ASA 150 # RF

VISIBLE VIEW : 50 MM

F/F HIEGHT : 180 MM

MAKE : NRG GLOBAL

HSN CODE : 90261020

TYPE : GLASS TUBE ROTAMETER

Name of the Fluid : METHANOL

Temperature : 60 DEG C

Pressure : 2-3 KG/CM2

Specific Gravity / Density : 0.780 KG/M3

Viscosity : 1.0 CP

M. RANGE : 0 5500 LPH

MOC (WETTEC PARTS) : SS316

End Connection : SS316 FLANGE END

Process Connection : 2 ASA 150 # RF

Float Material : SS316

Float Retainer : PTFE

Tube Material : GERMAN TAPER BOROSILICATE GLASS TUBE

Packing/O-Ring Material : PTFE

GLAND : CS

BODY / COVER : MS POWDER COATED

Scale : ACRYLIC ENGRAVED

Scale Length : 50 250 mm Approx.

Rangebility : 10:1

Scale Marking : In LPH

Accuracy : 2% F.S.D.

Inlet Conn. Orientation : BOTTOM

Outlet Conn. Orientation : TOP

FASTNERS : S.S.304

F/F HIEGHT : 500 MM

NRG MAKE make Magnetic Level Indicator provides clear, high clarity indication of liquid level. Typically, Magnetic Level Gauge consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Indicator is principally designed as an alternative to glass level gauges. We offer Magnetic Level Gauge having top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bi-colour Rollers. Magnetic level indicators are tailor made to various types of construction and sizes.

Magnetic Level Gauge operates on the principle of magnetic field coupling to provide fluid level information. Float chamber is typically constructed with non-magnetic pipe having process connections that matches to the vessel connections. Float size and weight is determined by the process fluid, pressure, temperature and the specific gravity of the process fluid. Float contains magnets to provide 360o magnetic flux field.

MAKE : NRG GLOBAL

HSN CODE : 90261020

TYPE : MAGETIC FLOAT TYPE

NAME OF THE FLUID : LIQUID

Temperature : Max 100 deg C

Pressure : 2-3 kg/cm2

Sp Gr / Density : 0.3 2.0

Viscosity : 0.7-10 Cp

WETTED PARTS (MOC) : SS 304

FLOAT : 2 NOS SS 316 OF 40 MM DIA

FLOAT STOPPER : SS 304

STEM PIPE : SS 304 OF 14 MM dia

CONNECTION SIZE : 1.5 ASA 150 # RF

CONNECTION MOC : SS 304 FLANGE

ENCLOSURE / HOUSING : ALLUMINIUM DIE CAST WEATHERPROOF

SWITCH : IMPORTED REED SWITCH

SWITCH CONTACT : NO , nc, com POTENTIAL FREE CONATCT 110 Vac 5 Amp

CABLE ENTRY : ET

NRG GLOBAL INSTRUMENTS MAKE TUBULAR LEVEL INDICATOR

• The Indicator is fitted between two end blocks through gland packings. The indicator is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in the gauge.
• Guards are provided in the form of Tie-rods for 360 visibility or C- channels around the gauge to protect it from accidental blows.
• Glass removal for replacement possible w/o dismantling the gauge.
• 100% PTFE bush as packing to ensure positive leak tightness for full vacuum as well as 6 kg/cm service pressure.
• It is available in single length of 2000mm c/c distance. We can extend the length by coupling 2 or more through coupler.
• We are providing Air Vent plug at top & drain plug at bottom for taking sample.
• We can also provide inbuilt isolation valve or offset constructed isolation valve on request.
• The connection provided will be Flanged/Screwed/TC joint.

INTRODUCTION

NRG make Float & Board Level Indicators are designed for an accurate, reliable & trouble free float operated technique used in large non -pressurized storage tanks

Direct Indication

The Float & Board Level Indicators consists of a float connected to a pointer through a rope via a set of pulleys. The pointer glides over a calibrated gauge board, positioned parallel to the tank. The float accurately follows liquid level variations in vertical direction. The horizontal float movement is as such, the pointer in TOP POSITION when tank is EMPTY and in BOTTOM POSITION when FULL.

.NRG GLOBAL MAKE FLOAT & BOARD LEVEL INDICATOR

MAKE : NRG GLOBAL

HSN CODE : 90261020

TYPE : FLOAT & BOARD

FLUID : LIQUID

TEMPERATURE : 160^O C

PRESSURE : 10 Kg/Cm2

SPECIFIC GRAVITY / DENSITY : 0.8 -2.0 KG/M3

VISCOSITY (OP / MAX) : 0.7 20 Cp

MOC OF THE TANK : MS./SS/HDPE/FRP

CONNECTION FLANGE : MS SLIP ON TYPE

FLANGE SIZE : 25 nb ASA 150 # RF

SCALE : ALLUMINIUMPOWDER COATED HAVING SCREEN PRINTED AND 150 MM WIDTH

AND 1 MTR LONG WITH WHITE BACKGROUND AND BLACK MARKING WITH PVC LAMINATED

ZERO PLATE : ALUMINIUM POWDER COATED

LEAST COUNT : 10 MM

INDICATION IN : CM

FLOAT : SS 304 HAVING 12 DIA

FLOAT WIRE : SS 304 HAVING 2.5 MM DIA MULTITHRED

PULLEY & PIN : SS 304

PULLEY HOUSING : ALLUMINIUM DIE CAST DUST PROOF

TBRACKET FOR SCALE JOINT : MS T TYPE AT EVERY METER POWDER COATED

TOP BRACKET : MS L TYPE POWDER COATED

CHECKNUT AND CHECKNUT PIPE: MS

CENTER CONNECTING PIPE : MS TELESCOPIC PIPE HAVING ADJUSTABLE UP TO 700 MM LONG

AIRROW (INDICATOR) : MS POWDER COATED WITH PP ROLLER WITH RED REDIUM MARKING

ANCHOR PLATE : N.A.

ANCHOR HOUSING : N.A.

ANCHOR SPRING : N.A.

FASTENER : GI PLATED

HIGHT TO BE MEASURE : 6.0 MTR

NRG MAKE Electromagnetic Flow Meter

MAKE : NRG

HSN CODE : 90261020

LIQUID OF MEDIA : WATER

Operating Pressure Max : 15 KG/cm

Operating Temperature : 40C

MOC : SS304

Electrode : SS 316

Flow Tube : SS 304 + ptfe lined

Lining : Teflon (PTFE).

Working Conductivity : Must be More than 5 Micro s./cm.

Process Connection : Flange ASA 150#

Mounting : In Line Horizontal.

Mounting Type : Integral

Input Supply : 230v Ac.

Display : 9 Character X 2 Line LED With Blue Backlight.

Flow Rate : 4 Digits LED.

Total Flow : 9 Digits LED.

Enclosure : Flameproof Box (4 Digisafe With 2NOS ET Entries )

Accuracy : +/-0.5% of F.S.

Output. Std. : 4 to 20mA.WITH RS 485

FLOW RANGE : 7 70 M3/HR

SIZE : 2.5 NB ASA 150 # RF

MAKE : NRG GLOBAL

HSN CODE : 9026

TYPE : U TUBE

Name of the Fluid : WATER

Temperature : 400 DEG C

Pressure : 1 KG/CM2

Specific Gravity / Density : 1.0

Viscosity : 1 Cp

M. RANGE : 250 - 0 - 250 MM WC

END BLOCK : SS304

End Connection : BSP-F

Tube Material : BOROSILICATE GLASS TUBE

Packing/O-Ring Material : NEOPRENE RUBBER

GLAND : SS304

BODY : SS304 BUFFING POLISH

BODY COVER : GLASS

Scale : SS304 ENGRAVED

Scale MARKING : IN MM WC

LEAST COUNT : 1 MM

Accuracy : 1% F.S.D.

MOUNTING : WALL MOUNTED

MAKE : NRG GLOBAL

HSN CODE : 90261020

TYPE : DOUBLE WINDOW

Name of the Fluid : LIQUID

Temperature : 230 DEG C

Pressure : 5 KG/CM2

MOC (WETTEC PARTS) : SS316 FABRICATED FROM SCH 10 PIPE

End Connection : SS316 FLANGE END

ROTOR : SS316

BASE PLATE : SS316

COVER PLATE : SS316

GLASS : BOROSILICATE TOUGHENED GLASS HAVING 12 MM THICK

Packing : VITON

FASTNERS : SS304

Process Connection : 32 NB ASA 150 # RF

VISIBLE VIEW : 50 MM

F/F HIEGHT : 180 MM

MAKE : NRG GLOBAL

HSN CODE : 90261020

TYPE : GLASS TUBE ROTAMETER

Name of the Fluid : METHANOL

Temperature : 60 DEG C

Pressure : 2-3 KG/CM2

Specific Gravity / Density : 0.780 KG/M3

Viscosity : 1.0 CP

M. RANGE : 0 5500 LPH

MOC (WETTEC PARTS) : SS316

End Connection : SS316 FLANGE END

Process Connection : 2 ASA 150 # RF

Float Material : SS316

Float Retainer : PTFE

Tube Material : GERMAN TAPER BOROSILICATE GLASS TUBE

Packing/O-Ring Material : PTFE

GLAND : CS

BODY / COVER : MS POWDER COATED

Scale : ACRYLIC ENGRAVED

Scale Length : 50 250 mm Approx.

Rangebility : 10:1

Scale Marking : In LPH

Accuracy : 2% F.S.D.

Inlet Conn. Orientation : BOTTOM

Outlet Conn. Orientation : TOP

FASTNERS : S.S.304

F/F HIEGHT : 500 MM

NRG MAKE make Magnetic Level Indicator provides clear, high clarity indication of liquid level. Typically, Magnetic Level Gauge consists of three major components: Float Chamber, Float and Indicator System. Magnetic Level Indicator is principally designed as an alternative to glass level gauges. We offer Magnetic Level Gauge having top-bottom, top and side mounted construction with two types of indicator system i.e. Capsule and Bi-colour Rollers. Magnetic level indicators are tailor made to various types of construction and sizes.

Magnetic Level Gauge operates on the principle of magnetic field coupling to provide fluid level information. Float chamber is typically constructed with non-magnetic pipe having process connections that matches to the vessel connections. Float size and weight is determined by the process fluid, pressure, temperature and the specific gravity of the process fluid. Float contains magnets to provide 360o magnetic flux field.