Our Products
Electrical & Electronic Testing Devices
2 Products availableLoad Cell
2 Products availableSensors
2 Products availableMeasuring Instruments & Equipment
1 Products availableDisplay Accessories
1 Products availableTransmitter Device
1 Products availableIndustrial Machinery
1 Products availableBreaker Panels
1 Products availableLeading Manufacturer, Supplier & Retailer of Digital Controller, weigh feeder controller and crane load controller.
We are one of the leading manufacturers and suppliers of Digital Controllers in the market. Our user friendly Digital Controllers accept mV or mA input from a variety of sensors such as load cells, torque cells, pressure sensors, temperature sensors, etc. It can also accept a pulse input and display linear position, or angular position, or rpm, etc. We offer Digital Controllers in a variety of specifications and can also customize them according to clients specifications.
Attributes :
Applications :
Specifications :
General Technical Specifications :
Sensor excitationx | ± 5V DC |
---|---|
Sensor drive capacityv | 2 nos. 350 . sensors (Optional up to 8 nos.) |
Sensor connectiono | 4 wire or 6 wiresors |
Input signal range | 0 to 30 mV (other input options on request, such as 0-100 mV, 0/4-20 mA, 0-5 VDC or 0-500 ) |
Internal resolutionr | 20,000 or 40,000 counts (selectable) |
Display resolution | 1,000 to 15,000 counts (as per application) |
Display full scale | 65,535 counts |
Non- linearity | +0.05 % of F.S. |
Zero temperature co-efficientr | +0.01% RO/oC/h |
Span temperature co-efficientr | +0.01% RO/oC/h |
Drift of no-load output with temperature | +0.05 % of F.S. |
Drift of no-load output after 1 hour | +0.05 % of F.S. |
Drift of full scale output after 1 hour | +0.01 % of F.S. |
Calibrationr | Full digital software calibration through keyboard |
Settings | Set Points, Digital Filter, Baud Rate and Analog Output Settings by software through keyboard |
Weight display | 5 digit 7 segment LED 12.7mm with negative sign2 |
Indicationsa | Tare, Gross, Peak & Set Points, through LEDs |
Keys | Micro keys |
Re-transmission outputss | RS232C, RS485 (MODbus protocol), 0/4-20 mA, 0-5/10 VDC (Any of the above at a time) |
Operating temperature rangep | 0 oC to +50 oC |
Storage temperature rangee | -10 oC to +70 o Co |
Operating voltageg | 110 VAC ±10% 50 Hz, 230 VAC ±10% 50 Hz, 12 VDC ±10% |
We are a prominent Manufacturer and Supplier of Weigh Feeder Controller, which is fabricated using advanced technology that ensures high performance and durability. Weigh Feeder Controller helps the user to handle the equipment with ease and it helps measure the Flow of solid material on belt conveyors with or without closed loop flow. Weigh Feeders offered by us displays the above values and also controls the feed rate to the desired value, by automatically adjusting the belt speed with a closed loop control. These systems are available over a wide range of flow rates, right from a few grams per second to hundreds of tons per hour, as per user requirement.
Weigh feeder controller consist set of 2 compact panels :
Technical Details :
Features :
Indication : Belt speed instead of Encoder speed control.
Additional Information:
Payment Terms : L/C
Delivery Time : 4 weeks
Technical Specifications :
Load cell excitation | ± 5 VDC |
---|---|
Load cell drive capacity | 2 nos. 350 . load cells (Optional up to 8 nos.) |
Load cell connection | 4 wire or 6 wire |
Input signal range | 0 to 30 MV |
Sampling rate | 1 per second |
Internal resolution | 20,000 counts |
Display resolution | 1,000 to 5,000 counts, |
Encoder excitation | + 5 VDC |
Encoder Input | + 5 VDC TTL pulse input from optical encoder |
Accuracy | ± 2% or better (depending on installation) |
Calibration | Full digital software calibration through keyboard |
Display | 5 digit 7 segment 13 mm height LED for Flow Rate, 6 digit 7 segment 8 mm height LED for Total Weight, 4 digit 7 segment 8 mm height LED for Flow Settings, 3 digit 7 segment 8 mm height LED for Motor Speed |
Indications | Flow Rate, Total Weight, Net Weight, Encoder Speed, Set Flow Rate (as % of FS), Motor Speed (as a function of Supply Frequency in Hz) |
Keys | Tactile feedback keys |
Controls | Motor On/Off, Control Auto/Manual, Motor Speed in Manual Model |
Operating temperature range | 0 oC to +50 oC |
Storage temperature range | 0 oC to +70 o C |
Operating voltage | 230 VAC +10%, 50 Hz (Optional : 110 VAC) |
We are engaged in Manufacturing and Supplying Crane Load Controller, which is ideally used for overhead material handling and weighing applications. Crane Load Controller is engineered with precision to serve the needs of different industries. This Crane Load Controller is well known for compact design and high performance.
Advantages :
Applications :
Technical Details :
Technical Specifications :
Sensor excitation | ± 5V DC |
---|---|
Sensor drive capacity | 2 nos. 350 . sensors (Optional up to 8 nos.) |
Sensor connection | 4 wire or 6 wiresors (Optional up to 8 nos.) |
Input signal range | 0 to 30 mV (other input options on request, such as 0-100 mV, 0/4-20 mA, 0-5 VDC or 0-500) |
Internal resolution | 20,000 or 40,000 counts (selectable) |
Display resolution | 1,000 to 15,000 counts (as per application)s |
Display full scale | 65,535 counts |
Non- linearity | +0.05 % of F.S. |
Zero temperature co-efficient | +0.01% RO/oC/h |
Span temperature co-efficient | +0.01% RO/oC/h |
Drift of no-load output with temperature | +0.05 % of F.S. |
Drift of no-load output after 1 hour | +0.05 % of F.S. |
Drift of full scale output after 1 hour | +0.01 % of F.S. |
Calibration | Full digital software calibration through keyboard |
Settings | Set Points, Digital Filter, Baud Rate and Analog Output Settings by software through keyboard |
Weight display | 5 digit 7 segment LED 12.7mm with negative sign2 |
Indications | Tare, Gross, Peak & Set Points, through LEDs |
Keys | Micro keys |
Re-transmission outputs | RS232C, RS485 (Modbus protocol), 0/4-20 mA, 0-5/10 VDC (Any of the above at a time) |
Operating temperature range | 0oC to +50 oC |
Storage temperature range | -10oC to +70oCo |
Operating voltage | 110 VAC ±10% 50 Hz, 230 VAC ±10% 50 Hz, 12 VDC ±10%A |