Post Buy Requirement
NP
Add Review

Our Products

  1. Testing Equipment 11 Products available
  2. Tachometers 8 Products available
  3. Measuring Instruments & Equipment 5 Products available
  4. Gas Analyzers 4 Products available
  5. Automotive Body Coach Building 3 Products available
  6. Signs

    2 Products available
  7. Machine And Precision Tools

    2 Products available
  8. Audio Recorders, Mixers & Transmitters

    1 Products available
  9. Puzzles & Educational Games

    1 Products available
  10. Others Products 18 Products available

Testing Equipment

We offer a complete product range of Road Test Equipment, Roller Break Tester, Car Break Tester, Motercycle Speed Tester and Truck Break Tester

Road Test Equipment

Road Test/Measuring Equipments.A small unit with suction cup contains a light sensitive sensor as well as signal processing circuitry. The sensor responds only to a sudden increase in light intensity which will occur when the brake light comes on. Slow changes of light intensity will not trigger any start signal. Direct sunlight is shielded off by the black suction cup. In short: With the test start unit sticking on the stop light, a sudden increase of light intensity inside the brake light case will generate a short pulse which is recognized by the system as closure of a normally open contact like a pedal switch contact.
MountingMake the suction cup stick to the cars brake light such that it intercepts the brake lights rays. In case the stop light glass should be very much curved or rounded, an adhesive tape may be used in addition. A dark adhesive tape may also increase light contrast registered by the sensor. Make sure the connecting cable is firmly attached to the car body by means of adhesive tape. Lead this thin cable to inside the car through the padding rubber of the cars door. Connect the cable to theBRAKE or ext. START/STOP connections of the Peiseler test system.

Road Test Equipment Testing Solution for
  • Speed
  • Acceleration
  • Braking distance
  • Braking time
  • Distance traveled
  • Test time
  • RPM
  • Fuel Consumption
  • Wheel Slip
  • Monitoring of transportation.
    View Complete Details

    Roller Break Tester

    Gruppo rulli prova freni per moto. TECHNICAL FEATURES:
  • Power engine 3, 7 Kw
  • Max force 3 KN.
  • Test speed 5 Km/h
  • Operating tension 400 V
  • Roller dimensions IZJ 205x300 mm long.
  • Friction value 0, 8 dry and 0, 7 wet
  • Rollers weight: 200 Kg
  • Dimensions roller group 800x620x250 mm COMPLETE WITH :-
  • Command box
  • Electronic boards
  • ARCNET system
  • ARCNET kit PC
  • Special cable for emergency switch
  • Operating system min. Windows 95
  • Infrared remote control
  • 4 weighing sensors
  • Connection cables 15 mt
  • Frame
    View Complete Details

    Car Break Tester

    ROLLER 2000 is a professional line for checking the braking efficiency, suspensions and side-slip of medium light-vehicles. The structure of the brake tester, which itself weight of 450 Kg, consists of top quality components and is able to withstand weights of 2500 Kg per axle. This is another reason why ROLLER 2200 represents a guarantee for anyone wantingto test vehicles. TECHNICAL FEATURES:
  • Brake force measurement range: 0 - 6000 N . Max test load: 4000 kg
  • Max test: 2500 kg
  • Test speed: 5 km/h
  • Motor power: 3.7 KW for motor ( thriphase J . Operating voltage: 3x 230/400 V, 50 Hz
  • Fuses: 3 x 25 A
  • Roller dimension: 0 205 x 700 mm lenght
  • Track: minimax 800/2200 mm
  • Friction valve of roller: 0.7 dry and wet
  • Fully-galvanized structure
  • Fully automatic testing procedure SUSPENSION TESTER TECHNICAL FEATURES:
  • Motor: 2.5 KW for motor (triphaseJ
  • Operating voltage: 3x230/400V, 50 Hz . Frequency of voltage: 0.25 Hz
  • Measurement: 0-100%
  • EUSAMA measurement
  • Weighing cells: 4
  • Track: minimax 800/2200 kg
  • Capacity per axle: minimax 200/1800kg
    View Complete Details

    Motercycle Speed Tester

    Speed-tester Road Runner mod. 5051 is a unit conceived to simulate the conditions of road load for the revision check of two, three and four wheels motorbikes and motorcycles belonging to the international categories L 1, L2, L3. L4 and L5. Its main function is to simulate, inside a workshop, the vehicle running on road at the constant speed required by the regulation to survey the exhaust gases. On road ride simulation is carried out thanks to a rollers device: on of the rollers is electrically braked with pre-established characteristic braking power/car speed.[MECHANIC TECHNICAL FEATURES
  • Height: 290 mm
  • Width: 1200 mm
  • Length: 650 mm
  • Superficial covering: painted plate
  • Top cover: cold galvanized
  • Practicable cover: removable with handle
  • System to contain the wheel of the vehicle tested: through lateral teflon wheels
  • Rollers number: 2
  • Rollers diameter: 192 mm
  • Rollers working length: 400 mm
  • Rollers centres distance: 300 mm
  • Test max. speed: 80 Km/h
  • Max. load admitted for wheel: 5000 NMETROLOGIC FEATURES
  • Speed measure full scale: 80 Km/h
  • Speed measure accuracy: ::t 1 Km/h per velocita > 20 Km/h
  • Space measure accuracy: :t 2 %
  • Time measure accuracy: :t 0, 1 5
  • Power MIN definition for calculations: 5 Watt. Speed MIN definition for display: 1 Km/h. Space MIN definition for display: 100 m. Power absorbed MAX error (speed between 20 and 59 Km/hJ: :t10% of theoretic value according to power/speed curve. Power absorbed MAX error (speed between 60 and 80 Km/hJ: :t20% of theoretic value according to power/speed curve. Working temperature: from 0 to 40 COPTIONAL ACCESSORIES:. RH and left fans 5061. Mechanic vice complete with belt for wheel blocking 5071. Pneumatic vice complete of safe operationpneumatic kit for wheel. Blocking 5072. Penumatic kit for safe start up 5073
    View Complete Details

    Truck Break Tester

    4WD Brake Roller group TECHNICAL FEATURES:
  • Campo di funzionamento: Per camion. bus, furgoni Operating Range: Trucks. Buses, vans and all passenger cars, max. axle load 18 t
  • Tyre size 10"-24"
  • Connection: 3 x 230/400 V, 50Hz Fuses 3 x 50A, slow-acting [other power supply on request)
  • Roller set [split] Max axle load 18 t Motor drive 2 x 11 KW AY Test Speed 2.6 km/h and 5, 2 km/h Roller Diameter 280 mm Roller length 1000 mm
  • Rollers dimensions with under-floor split roller sets [LxWxHJ 1 300 x 11 60 x 600 mm
  • Track width min./max. variable 900/2900 mm
  • Roller friction coefficient dry/wet 0, 8/0, 6
  • Display Unit Range of display, with automatic switching 0-8 KN, 0-40 KN 6-digits LCD displays [HJ 100 mm [L x W x HJ 600 x 880 x 380 mm Dimensions of display cabinet (W x H x OJ 600 x 850 x 380 mm FUNCTIONS:-
  • OMS measurement system
  • Double Speed and high performance motors: 2, 6 + 5, 2 Km/h
  • Test Load: 18 T.
  • Easy to use
  • The infrared remote control allows one operator to carry out all tests in a fully independent way
  • Easy Exit Thanks to this electromagnetic blocking device. the rollers exit is possible with any trucks, bus or tractors of any loads and in any atmospheric conditions,
  • Analogical-Digital display Led indicating the threshold of unbalance, LCD display with 6 positions, double pointer for left and right wheel
    View Complete Details

    Digital Battery Tester

    12 V DIGITAL BATTERY TESTER FUNCTIONS
  • Battery test
  • Starting system test
  • Recharging system test: TETECHNICAL FEATURES
  • Power supply: 12 V
  • Width: 120 mm
  • Height:215mm
  • Depth: 2B mm
  • Weight: 350g
    10005 USB/RS232 ADAPTORIt allows the connection of diagnostic units equipped by or serial port only to PC exclusively provided with USB port.
    KIT BLUETOOTHBlue-In 10001/96 Kit Bluetooth 9600 baud rate Blue-In. 1 0001/192 Kit Bluetooth 19200 baud rate TECHNICAL FEATURES:-
  • Mains Voltage: + 5 Vdc
  • Power Consumption: 70 mA
  • Max distance in open space: 100 m
  • Baud rate: 9600, N, B.1 or 19200, N.B.1
  • Dimensions: 5B x33 x 16 mm
  • 10001/96 connectable to items:B020, 9010. 700NET, B040. B050, B060, B070, B071, 9011
  • 10001/192 connectable to items: 5BOO, 5B20, 5B21 For a correct working also the dongle for the PC Blue-Out mod. 10000 is available. KIT BLUETOOTH FOR PC 10000 is equipped with:-
  • USB keys,
  • CD with the software necessary for the operation, . Detailed instructions for a correct installation
  • Operating system: Windows 9B II edition or following . Max distance in open space: 100 m.
    View Complete Details

    Dynamic Power Tester

    We are offering dynamic power tester.
    View Complete Details

    Diagnosis Engine Tester

    ENGINE TESTER FOR SPECIFIC DIAGNOSIS- - - -PC based Engine Analyser able to carry out the following functions:
  • Double trace oscilloscope with memory.
  • Primary and Secondary (raster parade and single cylinder)
  • Oscilloscope two channels
  • Start up and recharging diagnosis
  • Advance with Timing Light and magnetic captor
  • Dynamic compression
  • DIS ignitions
  • Bargraphics
  • Data Bank included
  • To be used with PC operating in Windows 98 or upper versions TECHNICAL FEATURES:
  • Mains Voltage: 230 Vac with power supply included
  • Mains Frequency: 50Hz (:!:20f0)
  • Power Consumption: 0, 5 W max
  • Dimensions (device only): 31 OX150X85 mm . Weight (device only): 1 kg approx. FUNCTIONS:-
  • LAB SCOPE:
  • Sampling rate: 2 million samples per second
  • Band width: (-3d B) DC - 60KHz
  • Sweep rate: 100 J.1s/div to 10 s/div.
  • Voltage range: :!: 125 mV/div. to :!:50 V/div.
  • Accuracy: 0.50f0
  • Time base: 100 J.1s/div. to 10 s/div.
  • Trigger with auto reset capability IGNITION:
  • RPM range: 100 to 9999 min-1 (resolution of 1 RPM) . Primary voltage: 0 to 750V
  • Secondary display ranges:
  • 9 kV to +45 kV
  • 5 kV to + 25 kV
  • 1.2 kV to + 6 kV
  • Time base: 1.0 ms/div. to 10ms/div.
  • Burn time 0 to 10ms (0, 1 ms resolution)
  • Dwell range
  • Degrees: 0 to 360, 1 resolution
  • Percent: 0 to 1000f0, 10f0 resolution
  • Burn kV: 0 to 6 Kv ENVIRONMENTAL OPERATING SPECIFICATION
  • Operating temp. 0 to 45C
  • Storage temp. -5 to 50C
  • Operating and storage humidity 20 to 85 Ofo
  • Dust, water and grease resistant
    View Complete Details

    Diesel Tacho Tester

    Diesel Timming Tacho Tester The DF-7712 is designed to measure injection timing of diesel engine and is the first device which is developed as the most eliable timing tachotester in the world.
  • Engine Applicability
    2 cycle and 4 cycle diesel engine.
  • Measure Range Engine Revolution :1209, 990 RPM (Min. RPM changes in 10 RPM increments.)

    Diesel Tacho Tester
  • Measure Range01, 500 r.p.m 06, 000 r.p.m (Accurancy within 3% of full scale)
  • Applicable Engine
    4 Cycle diesel engine
    View Complete Details

    Spark Plug Tester

    Spark Plug TesterWhen it comes to the search of best Spark Plug Tester Manufacturer, N.P. Electronics appears as an most deserved name. Our company also leads the market among biggest Spark Plug Tester suppliers with a vast array of Spark Plug Tester.
    View Complete Details

    Roller Power Tester

    Roller Power tester two wheels drive with electromagnetic braking device. TECHNICAL FEATURE:-
  • Power measurement: 0/500 HP
  • Test speed: 0/300 km/h
  • Drive power: 0/10.000 N
  • Axle charge: 3.500 kg
  • Lift: pneumatic
  • Power supply: 380 V three-phase - 50 Hz
  • Length: 3.400 mm
  • Width: 1.025 mm
  • Height: 410 mm
  • Weight: 1.470 kg
  • Rollers length: 700 mm
  • Min. track: 800 mm
  • Max track: 2.200 mm
  • Wheel min. diameter: 12 inches
  • Rollers diameter: 400 mm
  • Rollers axle base: 525 mm OPTIONAL ACCESSORIES:-
  • Cooling ventilation system 6110 COMPLETE WITH:
  • Rollers group
  • Command box
  • Infra-red remote control
  • Infra-red receiver
  • Out-put with serial cable
  • Personal Computer
  • 17" Monitor
  • Ink-jet printer
  • CD with installation software and the instructions manual FUNCTIONS:
  • Power measurement up to 500 HP
  • Max test speed: 300 km/h
  • Sweep test
  • Power test with established thresholds for RPM
  • Probe to survey tyres temperature
  • Power test with established thresholds for speed
  • Road simulation with automatic calculation according to the CX value and weight.
  • Front section for surveys on level road and slopes at different percentages.
  • Tachograph test to check the exact value of the on board instrument [tachograph) and of the covered kilometers
  • Lambda probe reading to check the carburation
  • Engine revolutions reading through electronic and automatic survey . Pressure and power sensor for turbo engines
  • Incorporated Barometric station to adjust the power according to DIN, CE, ISO and SAE regulations
  • Storage on disk of surveyed data
  • Data management to compare test
  • Thanks to the infrared remote control all functions can be carried out on board
  • Management of modular speed of the ventilation group access.
    View Complete Details
    Tell Us What are you looking for? Will call you back

    Contact Us