Our Products
Packaging Seals And Caps
2 Products availablePipe & Tube Fittings
2 Products availableBushings
2 Products availableWe offer a complete product range of cable holding clamp, EHT Wire Clamp for Tv Monitors, Adhesive Backed Adjustable Cable Clamp, Adhesive Backed Flat Ribbon Cable Clamp and FIR Tree Push Clamp
It is designed to protect EHT wires from heat in Tvs and Monitors. Its keeps high voltage wires away from other components. Its flexible leg design eases wire insertion and inner leg surrounding wire allows for a positive fit.
It is a one piece pressure sensitive adhesive clamp designed to reduce the time spent on electrical and electronic wiring installation and to provide a system which is absolutely foolproof, simple, safe and permanent in operation. It is widely used for securing wires and cables, or fixing and holding capacitors and electronic components of various sizes, diameters and shapes. The Ladder style fastening method can be released and easily refastened. It Can be mounted in two ways, using adhesive tape backing or screw - in. Available for Cable bundle diameter ranging from 5 to 35 mm.
Novoflex Part No. |
Mounting Method |
Cable Dia Range (mm) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
Screw Hole dia (mm) |
Standard Packing |
ACC1 (A) | Adhesive | 5 to 21 | 21 | 30 | 12 | 80 | 3.6 | 100 nos. |
ACC1 (S) | Screw | 5 to 21 | 21 | 30 | 12 | 80 | 3.6 | 100 nos. |
ACC1 (P) | Push Mount | 5 to 35 | 21 | 30 | 11 | 126 | 6.3 | 100 nos. |
ACC2 (A) | Adhesive | 5 to 35 | 21 | 30 | 12 | 126 | 3.6 | 100 nos. |
ACC2 (S) | Screw | 5 to 35 | 21 | 30 | 12 | 126 | 3.6 | 100 nos. |
A practical, fast way to mount any size of flat ribbon cable. These adhesive backed, or screw mounted clips securely hold flat or ribbon cables. Cables can be removed for rerouting or replacement if desired. Can accommodate stacked cables too. Its flexible tension range can hold more than one ribbon cable.
Novoflex Part No. |
Mounting Method |
A (mm) |
B (mm) |
C (mm) |
D(Dia) (mm) |
Standard Packing |
FRC (A) | Adhesive | 20.50 | 30.40 | 25.10 | 3.50 | 100 nos. |
FRC (S) | Screw | 20.50 | 30.40 | 25.10 | 3.50 | 100 nos. |
This Fir Tree push clamp is uniquely designed to secure cables / pipes to chassis' by just pushing the clip through a hole dia of 6.8 mm and a panel thickness range of 0.7 - 11 mm without the aid of any fixing tool. Once clamped down, the internal locking feature engages to provide very strong retention force to offset both direct vertical and side to side load forces. The extended Fir Tree allows for a wide range of panel thickness. The staggered Fir Tree branch design provides low insertion forces and high extraction forces.
APPLICATION :The clip finds application in wire harness, automotive trucking and heavy equipment manufacturing industries.
Novoflex Part No. |
Nominal Overall Length L (mm) |
Panel Thickness (mm) |
Push Hole Dia (mm) |
Max Cable Bundle - Dia (mm) |
Standard Packing |
FTC - 01 | 41 | 41 | 100 Nos. |