This is a structural material with cross section of 90 degree angle. The dimension is determined by the length and the thickness of the two sides. If the lengths of the two sides are equal, it is equal angle, otherwise it is unequal. It is used in all construction activity. Sizes available are as follows:

1. Equal Angles : 20 * 3 upto 200 * 20 mm

2. Unqual Angles: 45 * 30 * 5 upto 150 * 115 * 12 mm

Also available M.S.'T' Angles in different sizes.

Flats are basically thin strips of mild steel with the thickness of the strip varying commonly from 3mm to 25mm.

Sizes are also available: 12 * 3 upto 200 * 50mm

As the name suggests, this product has a circular cross section. It is referred in terms of the diameter of the circle.

Sizes available: 75 * 40mm

Channel has a cross section as shown in the picture. It is referred by the dimension of the horizontal part to the vertical part.

Sizes available: 75 * 40mm upto 400 * 100mm Also available is the Tele Channel (41 * 32mm).

Mild Steel Pipes is a term generally used to designate a long hollow body used for conducting gases or liquids such as water, fuel, gas, steam, oil etc. Pipes are also used for erection, scaffolding, drainage, water supply and other structural & mechanical uses.

Beams are generally used for structural purposes, supports to heavy plant, equipments & general Fabrication works. Beams are referred by the dimensions of the web & Flange of the beam. Generally available in length varying from 10 to 12 meters.

Plates are generally used for Fabrication, structural purposes, for making tasks, Pressure Vessels etc. and generally fall in the categories of either carbon steel or Alloy Steel. Plates are available in standard width of 1250mm which may go upto 3000mm. Thickness available from 5mm upto 80mm.

This is a structural material with cross section of 90 degree angle. The dimension is determined by the length and the thickness of the two sides. If the lengths of the two sides are equal, it is equal angle, otherwise it is unequal. It is used in all construction activity. Sizes available are as follows:

1. Equal Angles : 20 * 3 upto 200 * 20 mm

2. Unqual Angles: 45 * 30 * 5 upto 150 * 115 * 12 mm

Also available M.S.'T' Angles in different sizes.

Flats are basically thin strips of mild steel with the thickness of the strip varying commonly from 3mm to 25mm.

Sizes are also available: 12 * 3 upto 200 * 50mm

As the name suggests, this product has a circular cross section. It is referred in terms of the diameter of the circle.

Sizes available: 75 * 40mm

Channel has a cross section as shown in the picture. It is referred by the dimension of the horizontal part to the vertical part.

Sizes available: 75 * 40mm upto 400 * 100mm Also available is the Tele Channel (41 * 32mm).

Mild Steel Pipes is a term generally used to designate a long hollow body used for conducting gases or liquids such as water, fuel, gas, steam, oil etc. Pipes are also used for erection, scaffolding, drainage, water supply and other structural & mechanical uses.

Beams are generally used for structural purposes, supports to heavy plant, equipments & general Fabrication works. Beams are referred by the dimensions of the web & Flange of the beam. Generally available in length varying from 10 to 12 meters.

Plates are generally used for Fabrication, structural purposes, for making tasks, Pressure Vessels etc. and generally fall in the categories of either carbon steel or Alloy Steel. Plates are available in standard width of 1250mm which may go upto 3000mm. Thickness available from 5mm upto 80mm.