Double skin construction suitable for outdoor installation. The casing panels shall be made of pre-painted steel sheet externally & plain GSS sheet internally injected with CFC free sandwich PUF material 40 kgm3 density which is non-combustible in nature. The framework shall be mmore...
As the name implies, Evaporative Cooling works by evaporating water in the air stream. In order for the water to evaporate, the water must absorb heat. Hence, evaporative cooling involves heat & mass transfer which occurs when water and unsaturated air come in contact, and no heamore...
The indirect cooling module (ICM) is a pre-cooler used in 2-Stage or IndirectDirect evaporative cooling. The ICM cools the air without adding any additional moisture. It accomplishes this by circulating water through a sensible heat exchanger, while a fan draws air through the hemore...
The core part of Roots Air Systems evaporative air cooler is the high efficiency evaporative cooling pad. Natural multi-layer corrugated cellulose material, which utilizes the physical phenomenon of water evaporation absorbing heat, evaporation area affecting evaporation effectivmore...
Close-coupled, chilled water cooling for medium to large data centers Explore InRow RC in 3D animation. The InRow Chilled Water unit closely couples the cooling with the IT heat load. This prevents hot air recirculation, while improving cooling predictability and allowing for a pmore...
Floor mounted fan section are available from 2000 CFM to 35000 CFM. Ceiling suspended fan section are available from 1200 CFM to 4000 CFM (Direct Driven) and 3000 CFM to 6000 CFM (Belt Driven) Calculations of cooling loads and air flow requirements for each control zone. Psychrommore...