Compressed air dryer are removed in water separator. The resultant compressed air becomes dry to pressure dew point equal to its reduced temperature (generally around+2°C to +8°C). As long as the temperature of compressed air, as it travels through the system does not fall belomore...
Desiccant air dryers Heat exchangers maintain high degree of heat exchange efficiency and lower pressure drop through out life of dryer. Consistent degree of dryness over a wide range of flows and operating conditions.more...
Refrigerated air dryers as the temperature of compressed air, as it travels through the system does not fall below the dew point temperature produced in the dryer, no more water vapours will condense into troublesome liquid in downstream air lines. more...
Features : Cost effective, Compact design, Low maintenance, Easy to install, Less power consumption, Increased desiccant life, In-built safety measures.
We are offering drying of plastics enhances quality of molding. Moisture content in plastics adversely affects the quality of molding. Excessive moisture in resins leads to products with unacceptable sturdiness, silver streaks and holes. Dryers serve to remove moisture from resinmore...
The heatless type dryer is designed to take advantage of the natural tendency to dessicant to established equilibrium with their surrounding and can deliver super dry compessed air. these type of dryers are the most economical and dew poins upto (-)40 °c are easily achieved. more...
This is a simple alternative for medium & bigger capacities where Heatless Dryer become uneconomical due to heavy purge losses. In this type of dryer the regeneration is accomplished with a very small portion of dried air/gas, which is circulated in the tower duly filled withmore...
The Heat of Compression (HOC) dryers are No-Purge Loss type desiccant dryers based on adsorption principle. The hot air from the Compressor at min 120 deg C and higher temp, is used directly for regeneration of the desiccant. After regeneration, this air is cooled down to 40 deg more...
Our organization is engaged in offering a comprehensive range of heat reactivated type air dryers. These are extensively used when compressed air of very low dew point of (-) 60oc or (-) 80o deg c is required. Our range is designed in line with set industry standards, wherein themore...
We are offering refrigerated air dryer. The basic principle is the removal of moisture by cooling air to certain present temperature. The concept of efficient cooling is removal of heat only. The air first enters into the precooler where the incoming hot air is being cooled by oumore...
Our organization is engaged in offering a comprehensive range of heat reactivated type air dryers. These are extensively used when compressed air of very low dew point of (-) 60oc or (-) 80o deg c is required. Our range is designed in line with set industry standards, wherein themore...
We offers a wide range of refrigerated air dryer which is used to remove moisture from compressed air by reducing the temperature. In this dryer compressed air is passed through a heat interchanger where cold refrigerant at around 3°c is passed through the other side of the heatmore...
TVIPL offering best Solutions in the field of Compressed Air Filtration Systems and purification (drying) system. The main driving force behind for steady growth of the company is its dedicated team of qualified & well experienced e ngineers. Our product manufacturing range : Airmore...
Compressed air with saturated water vapor enters the dryer’s pre-cooling device, in which, the entered hot air is cooled down by the outgoing cold air partly, thus reducing the load on the system (this process is pre-cooling). Pre-cooled air enters the evaporator. Here, heat remore...
Compressed air leaving a compressor & after cooler is saturated with moisture, dust, oil (in lub, compressor & other particles) which is responsible for major problems. With this, we can attain trouble free & operationally safe production by dry & clean air. Moistmore...
Micro heat regenerated adsorption dryer works in a twin-tower alternative operation mode. Compressed air enters the dryer’s tower A through valve 1A (1B is closed), then is dehydrated and dried under the unique adsorption action of the adsorbent. Finished gas flows to the gmore...
Having the support of an expert team, we have successfully developed Refrigerated Air Dryers. These dryers worked on the principle of compressed air with saturated water vapor that enters the dryer's pre-cooling device. This air is cooled down with outgoing cold air, thus reducinmore...
Adsorption dryers (Heatless) are designed with the consistent efforts of our professional team and the vast knowledge that they owe. These dryers’ works on a twin-tower alternative operation mode when the compressed air enters the dryer’s tower A through valve 1A. The air is more...