Noida Machine Tools

Sector 10, Noida, Uttar Pradesh

JLS India advance Technology GMI-Design (Noida Machine Tools) based of Microprocessor vacuum drying oven, the thermal processes occur in an airtight chamber where a desired level of vacuum has been applied using an external vacuum pump and Advance Technology. With a vacuum oven the entire application can take place under vacuum or a controlled atmosphere can be created through the introduction of an inert gas. When determining the process you will use for a vacuum oven bear in mind that you will need to size a pump to meet this application. This requires defining the appropriate chamber size, the level of vacuum desired, and how quickly you will need to reach that desired vacuum level.

• Standard Model Inside S.S. 304 with mirror polished & outside powder coated M.S.
• G.M.P. Model Inside S.S. 304 mirror polished & Outside S.S. 304 dull smooth buff.
• Temperature Range : upto 200 oC.
• Temperature Accuracy : 0.5 oC
• Temperature Uniformity : 5 oC on tray.
• Nichrome wire band heaters wound round the inner body.

JLS India Advance Technology GMI-Design Cold lab chambers are design with perfection to meet toughest condition of application an are built with temper sefty glass door.

• Digital/PID controller.
•  Capacity from 150Ltr. to 1500Ltr.
• Turbo fan circulation and defrosting.
• Castor wheels.
• PUF insulation
• CFC Free.
• For Customise demand please Contact.

An Incubator Shaker performs orbital shaking below temperature controlled conditions. Cell culture, biological science, medicine etc. square measure square measureas wherever these units are extensively utilized. we have a tendency to manufacture and provide brooder shakers in kind of configurations; cold or heated, benchtop or floor mounted and double layer etc. These shaking brooder units square measure totally made-to-order and conjointly on the market with big selection of accessories and choices to accommodate specific application parameters. To a lot of regarding our brooder shaker value and alternative necessary details, please mail North American country your question, our executives can assist you with everything you wish.

• Versatile usage
• Ergonomic Design
• Energy Efficient
• CFC free cooling
• Long life
• Low Maintenance
• Calibration And Protocol Documentation

The standard model of our orbital shaker has a plat form size of 500mm x 500mm and it can withhold 16-20 flasks of 250ml or 500 ml. However this can be modified to suit the individual customer’s requirements.

The economical and diligent shaking system of our setup shaker features a orbital shaking movement that is hopped-up by a reliable crompton greaves motor of appropriate power and power.

JLSs open air shakers square measure usually designed to suit , researchers application demands in cultivating microorganism, tissue cultures and cell cultures. The constant agitation with uniform amplitude provides the optimum element transfer to the cultures, leading to higher and consistent yield.

These research laboratory scale exterior shakers square measure on the market in three totally different variants to settle on from. supported clamp holding capability and speed, Noida Machine Tools exterior shakers addresses the user scientists necessities in the Scientific Instruments.

• Ergonomically designed with minimal footprint
• Triple-eccentric counterbalanced drive for uniform agitation with 25.0 mm shaking orbit.
• Maintenance free lubricated ball bearings for noiseless operation
• Caster wheels for easy mobility
• FRP exterior with anti-vibration mount for smooth running
• Optional timer function for speed.
• Powerful Permanent Magnet DC drive with digital LED display of speed

The apparatus Shaker series is meant for continuous operation and is capable of handling significant workloads with a robust, brushless induction drive. Heat distribution technology ensures that temperatures area unit exactly maintained throughout the chamber with accuracy and uniformity. Inconsistencies because of stratification area unit reduced and therefore the elect temperature is unendingly preserved throughout the chamber among zero.25%. Noise and vibration area unit decreased by a sophisticated, laptop designed motor isolation system.

This orbital shaker brooder comes equipped with refrigeration facility. It options twenty five to four hundred rev speed management ampoule easy input device with electric switch controls. chip primarily based pelvic inflammatory disease controller offers superior temperature accuracy and fan circulation ensures glorious uniformity of temperature. Brushless DC motor provides long maintenance free operation. This benchtop cold brooder shaker utilizes solely pollutant free refrigerant.

The apparatus options multiple chambers and is fitted with a display and motor vehicle standardization inflammatory disease chip controller. Its four chambers square measure controlled individually, and every may be operated till its own specific conditions

• Combination of refrigerated incubator and shaker.
• Table top design occupies less bench space
• Large capacity of flasks in a small foot print
• Tempered viewing glass
• Audio / visual alarm for over speed & temperature
• Microprocessor based PID controller
• Forced air circulation for temperature uniformity
• Automatic restart after power failure & chamber closing

JLS's 'Hermetically-sealed compressor uses CFC-free refrigerant. Refrigerated Incubator Shaker Cooling coils are placed between foamed-in-place PUF insulation and inner side of stainless steel chamber eliminating any chances of FROST FORMATION on the evaporator which leads to choking of COMPRESSOR/CONDENSING UNIT.

JLS India microbiological and cell culture laboratories require highly sterile working environment for performing research activities and laminar air flow cabinets are the best solution for them. Often called laminar air flow chambers or laminar air flow workstations, these cabinets are designed to keep contents of the work zone safe from particulates that are sensitive to such contamination.

Horizontal Laminar Flow workstations are designed to protect the product within the work area from airborne particulates in the ambient air. The regulated efflux of custom made laminar airflow supplies the work zone with ISO Class 5 air cleanliness to offer the best product production by a clean bench in the industry. The Horizontal Laminar Flow workstations pushes the air through a HEPA filter and directs the filtered air horizontally over the work surface at a constant speed, toward the operator.

• Durable & cost effective
• Fluorescent tube light
• No gaps and joints to prevent accumulation of germs.
• Air filters made up of mini plated non-woven fabric.
• Balanced motor static as well as dynamic
• Microprocessor based controls
• Built in U.V. Germicidal Light

JLS India Freezing and Cooling equipment are backed up by 20 years of strong hard core exprience. Application includes vacuum, Nano technologies, Spectrophotometry.The precision of thermoelectric & Refrigerant type./

Recirculating chillers are ideal for applications requiring heat removal across a wide temperature range. Offering five cooling capacities with a temperature range from -15C to +35C, the Merlin chiller platform provides powerful cooling in a reliable and compact design. With a wide variety of options including a choice of pumps, communication packages, and Low-Level/Low-Flow indicators, Merlin recirculating chillers can be configured to meet a wide range of applcation requirements.

• Digital Controler with indicator/PID controls.
• Small Footprint
• Temperature control with high accuracy
• PUF Insulation CFC Free.
• Leakage Detection Function, touch Screen
• Leakage current monitoring

Chiller is one of the most important equipment of an etching & CVD equipment to keep the temperature of wafer & chamber stable at certain level.

JLS India advance Technology GMI-Design (Noida Machine Tools) based of Microprocessor With long term industry experience and understanding in this domain, we are engaged in manufacturing and exporting a comprehensive array of ice flaking machine, Ice Flakers, laboratory ice flaking machine, 50kg / 80/ 90 / 100 kg ice flaking machine, ice making machine and ice maker.

JLS India Technology Ice Flakers are the most suitable Ice Flake Machines Ice Making Machine used in laboratories worldwide. With the use of international quality standard material and advanced manufacturing and designing technology, our units prove to be highly reliable and durable flake ice makers available on the market today. These systems are supplied to all over India and exported to Asian, African and Middle East countries with economical price and excellent warranty.

• Continuous ice flake output
• CFC free refrigerant
• Noiseless operation
• Energy Efficient
• Caster wheels for easy mobility
• Simple installation
• Ice Flake output:- 25 to 196 kg / day or more
• Safety features:- Over loading protection / water shortage auto detection

JLS India is a leading Indian manufacturer of muffle furnaces for laboratory use with temperature range 800C to 1800C. As required, we provide both readymade (ready stock) and customized muffle furnace systems to our customers worldwide. These laboratory muffle furnace and Tube furnace units are utilized in general purpose heating in laboratories, ashing tests on wool, rubber, fibers or fabrics, heat treatment requirements for gears and various research facilities in chemistry and physics.

• Sturdy construction for long term use
• Compact in design and space saving
• Safe and trouble free performance
• Microprocessor PID controller
• Over temperature and short circuit breaker
• Ventilation or chimney at the back
• Uniform heating inside chamber

Noida Machine Tools meet unique needs of every application, our muffle furnaces, Tube Furnace or box furnaces are available in temperature range from 800C to 1400C (800C, 1100C, 1200C and 1400C), in addition, we also design and manufacture high temperature muffle furnace up to 1800C (1500C, 1600C, 1700C, and 1800C).

These systems are microprocessor controlled programmable muffle furnaces that offer easy and safe operation even at high temperature. These systems are designed with your safety in mind. Multi-layered insulation keeps external surfaces (cabinet) cool to the touch. Door safety switch (optional accessory) stops power to heating elements when door is opened.

JLS India Technology GMI-Germany Design Fully Automatic Autoclaves are an industry standard, and used in almost all Pharma companies, Biotech, Research, etc. JLS India Advance Technology of Fully Automatic Autoclaves are years ahead of any other brand in terms of performance, quality and features.

• NMT Fully Automatic Autoclaves are Double or Triple walled inner and outer made of thick gauge Stainless Steel.
• JLS Indias Fully Automatic Autoclaves have Foot Lifting arrangement.
• JLS Indias Fully Automatic Autoclaves are electrically operated, suitable for rapid sterilization under steam pressure.
• JLS India Technology Autoclave has Solenoid valve system for our Fully Automatic Autoclaves
• Our Fully Automatic Autoclaves Sterilization under saturated Steam Pressure at 15 PSI.
• JLS India Technology GMI-Design Autoclaves have S.S. Basket for sterilizer of Fully Automatic Autoclaves
• JLS Autoclaves have Fully Automatic Autoclaves works on Single Phase supply
• JLS India Automatic Autoclave Lid is made of thick gauge stainless steel with pressure gauge,

• steam release valve
• Two safety valves
• JLS India Technology Autoclave has Automatic low water level cut off for our Fully Automatic Autoclaves.
• Alarm safety
• Advance printed in optional

JLS India Horizontal Autoclaves Cylindrical, manufactured by Noida Machine Tools are smart investment for hospitals, Research Institute and laboratories, where large volume of sterilization is required. Designed ergonomically, our range of high pressure horizontal autoclave sterilizers is ideal for academic facilities, biotech industries, pharmaceutical industries, hospitals, research centers and food and beverage industries. These units efficiently meet stringent sterilization requirements and well suited for sterilizing hospital dressings and surgical instruments, rubber and plastic goods, glassware and utensils etc.

We manufacture both rectangular and cylindrical horizontal autoclave systems, which can be further customized in order to match specific requirements of our customers. The scope of customization includes construction material, inner tank volume, valves and printer options. These units can also be constructed with vacuum drying option; for this purpose a provision of vacuum (through vacuum pump) in the chamber is applied. Our each horizontal autoclave unit provides highly satisfactory performance and competitive price guarantee

• Available in rectangular and cylindrical shapes
• Double and triple walled construction
• Inner tank capacity up to 240 liters or more
• Single and double doors
• Automatic pressure locking device
• Immersion type heating element
• Low water cut-off device
• Automatic vacuum breaker

The standard range comes with internal tank volume range from 78 to 360 liters, however on specific requirement of customer, depend on usage these can further upgraded up to maximum 600 liters. Customers who require below 78 liters horizontal autoclave models these can also be designed on order.

JJLS India Standard models of Vertical autoclave units manufactured by Noida Machine Tools are available with chamber volumes of 22 liters to 175 liters that accommodate two and three drums accordingly. These systems are designed for meeting effective sterilization requirements in bacteriological and research laboratories, hospitals and clinics and food and beverage units.

These systems are fully customizable and provided with large scope of customization; to meet individual budget, we can equipment your vertical autoclave with a number of optional accessories such as temperature chart recorder, digital temperature indicator, PID Controller and provision to attach a dot matrix printer.

• Tank volume 20 to 175 liters.
• Equipped with joint less silicon rubber gasket
• Double, triple wall & GMP construction
• Radial or wing nut type door locking
• Water level indicator
• Digital temperature indicator
• Sterilizing Temperature:- 121C to 134C (150C - Optional)
• USB interface for data transfer (Optional)

There are some small articles and objects that need to be sterilized and with small autoclave sterilizers manufactured by Noida Machine Tools, these practices become easy. These units are suitable for wrapped / un-wrapped / liquid / utensils etc. They are widely used in hospitals, blood banks, bio-medical laboratories, Research Institute, that produce infectious waste medical waste. These units can efficiently treat all types of infectious waste, clinical instruments and other materials.

Designed with extremely user-friendly controls, operating temperature up to 121C, these systems are efficiently suited for 4-6 minutes rapidly sterilizing. These machines are safe for operators as well as objects to be sterilized. These small autoclave systems are durable and possess fully stainless steel structure.

• Suitable for small sterilizing applications
• Front and top loading type
• Chamber volume 8 to 24 liters
• Carrying handle for lifting and moving
• Over temperature protection.
• Over pressure protection
• Fully stainless steel construction

JLS India Technology GMI-Germany Design A cooling bath, Cooling viscosight bath, in laboratory chemistry practice, is a liquid mixture which is used to maintain low temperatures, typically between 13 C and 196 C. These low temperatures are used to collect liquids after distillation, to remove solvents using a rotary evaporator, or to perform a chemical reaction below room .

A cooling bath is a mixture used in a laboratory when low temperatures are needed. The simplest and cheapest cooling bath is an ice/water mixture, which maintains a temperature of 0 C. For lower temperatures, three main types of cooling baths are topic.

• Temp. Control Range: from 5C above ambient to 100C
• Timing Range : 1min99h59min
• Temp. Control Accuracy: 0.3
• Display Accuracy: 0.1
• Heating Time: 15 min (from 20C to 100C)
• Heating Parts: Heater
• Standard Blocks: See " Dry Bath Blocks for MK

We are Manufacturer, exporter and supplier of 10 digital V with set of glassware vertical, 10 digital V-C with set of glassware vertical, coated, 10 digital with dry ice condenser, 10 digital with dry ice condenser, coated, Digital Rotary Evaporator Vertical Type etc.

JLS India Technology GMI-Germany Design Refrigerated Fluid Chiller System cools various fluids such as water, water/glycol or oil down to, or below, the ambient temperature. These provide Stable and reliable cooling for many common heat removal applications, including laser etching, AA furnaces, ICP, rotary evaporators, vacuum systems, reaction vessels, plasma etching and condenser cooling.

Whether integrated into a machine or used as an auxiliary cooler, this system will tackle any cooling task and guarantees quality with utmost precision. .

• Equipped with solenoid valve, pressure controller for safe, Silent and efficient refrigeration.
• Liquid level indication sight window and pressure gauge help you observe the circulating and cooling process going the way as expected
• Over temperature protection
• Air cooled condenser
• RS232 interface for PC-connection (Optional)
• USB ports (optional)
• CFC free refrigeration unit
• Real time data acquisition system (optional),

Temperature range of our recirculatory chiller models is -10C to 40C.

JLS India design and manufacture glass micropipette and adjustable micropipette that are used in educational, research, diagnostic and clinical pathology labs. The tip cone of micropipettes is fully autoclavable which keeps it sterile for each use. These are also in accordance with the industry trends and the international quality standards.

JLS Indias are producing of world category Micropipette. Our technologically advanced vary of product ar capable of providing even the foremost minute findings and observations to the user. we have a tendency to ar a team of tough technocrats and scientists to style the world's best vary of product for our valued shoppers. By leverage our full potentials, we have a tendency to ar capable of planning tailor created product as per the precise necessities of the shoppers. we have a tendency to ar authorised with ISO 9001, metal and EU certification.

JLS India we manufacture a wide range of Environmental Stability Test Chamber that are manufactured with leak proof material under strict quality control system. These have been appreciated for their durability and available in various standards sizes, however to suit the varied requirement of the clients, we can also customize these chambers. Our range includes humidity ovens and stability chambers.

• Digitally controlled interface
• Coming with wheel support for mobility
• Humidity control from 55% to 90% (+/- 5%).
• Outside mild steel powder coated as well as puff insulation support
• Inner compartment featuring stainless steel adjustable shelves
• Two doors support with inner full length transparent door
• System supporting PID with pt. 100 sensor

The Constant Temperature and Humidity Test Chamber from JLS India are environmental test chambers, designed to simulate constant climatic conditions for testing a wide variety of products for their quality, performance, shelf life and stability. These equipments are most commonly employed for testing electrical devices, electronic parts and components, instruments, biological samples, food items and other manufactured and processed goods and find widespread usage in scientific research organizations, semiconductor industries, material research institutes and other industrial and manufacturing units.

These equipments also come equipped with a wide range of programming and documentation options through interfaces and are adapted for PC and network connectivity. The JLS India Uniform Temperature and Humidity Test Chamber are designed in accordance with international standards of quality and safety and are available in a wide variety of sizes and configurations. They are available in both standard and customized models and come equipped with CE certification.

• Safe and reliable operation
• Energy efficient design
• Versatile usage
• Clear LCD display with touch screen controllers
• High quality and lowest price power leakage protection feature

The JLS India Plant Tissue Culture Chamber are specifically designed equipments that provide a highly controlled and sterile environment for various laboratory and commercial tissue culture applications. These cell culture chambers are available as both stand-alone units as well as two-level units to allow simulation of different growing environments within the same equipment.

The Plant Tissue Culture Test Chamber from JLS India are available as easy to install, cost-effective units, designed for economical and energy efficient operation. They are available in various standard sizes and can also be customized for specific applications. They are designed according to international standards and conform to the highest standards of quality and safety. The Chamber also known as Tissue Culture Chamber and Tissue Culture Test Chamber.

• Welded seams
• Environment friendly powder coat finish
• Magnetic door gaskets
• Air diffuser with slow vertical airflow
• Fixed lamp banks

JLS-India Make in INDIA introduced world's best Fermentor/Bioreactor system suitable for a wide range of research, education and industrial applications. Cell Culture or Microbial Fermentation.Rectangular bottom autoclavable laboratory scientific fermentor/bioreactor Comes in two models: Most economic (Laboratory Basic) or highest flexibility (Research Advanced) A number of easy-to-use, pre-configured versions are available for both microbial culture and cell culture.

• Microbial culture - growth of bacteria, yeast and fungi
• Cell culture - growth of animal, insect and plant cells
• Suitable for laboratories without steam supply as it can be electrically sterilized in the absence of steam
• Superior design for optimal heat & mass transfer for high cell density
• Transition from shaker or tissue culture flask
• Small scale protein expression
• Inclusive Notebook PC for operation and data storage
• Interchangeable culture vessels with 1.2 L, 2.5L or 5L 7 ltrs working volume

JLS India Horizontal and Vertical Laminar Flow Clean Workstations utilize the newest technologies in laminar airflow design, materials and manufacturing processes. The clean workstation can be used where clean airflow per ISO is required for the preparation of inject able drugs, IV solutions, tissue culture, optics, microelectronics.

Noida Machine Tools Vertical Laminar Air Flow are conceptualized to provide a work area completely bathed in high efficiency perfect air, which is free from any kind of particulate contamination or impurities. These units are ideally suited in all the applications, requiring protection of biological specimens or products from the possible contamination during the process or test. Our Laminar Air Flow Bench is fast gaining popularity in other fields, such as pharmaceutical production, electronic industries and various other manufacturing applications.

Laminar air flow uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.

laminar air flow are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

• Durable & cost effective
• Fluorescent tube light
• No gaps and joints to prevent accumulation of germs.
• Air filters made up of mini plated non-woven fabric.
• Balanced motor static as well as dynamic
• Microprocessor based controls
• Built in U.V. Germicidal Light

Mini Centrifuge Digital, Brushless manufacturer, Mini Centrifuge ( Non Digital ), Compact Laboratory Centrifuge Digital, (General Purpose), Revolutionary General Pupose Lab. Centrifuge Digital, Revolutionary Microprocessor Besed Deluxe Centrifuge, Revolutionary Microprocessor Laboratory Centrifuge Brushless, Laboratory Centrifuge Brushless Premium Model Max. Speed 6000, Laboratory Centrifuge Medium-High Seed Max. Speed 10000, Micro Centriuge Machine Digital, 16000 R.P.M, Hematocrite Centrifuge Digital, High Speed Laboratory Centrifuge Machine. 20000 rpm, Laboratory Centrifuge Universal Brushless 20000 rpm.

JLS India Centirfuge is fitted microprocessor based 2 line 16 character LCD pannel for 0-59 minutes countdown timer, digital rpm meter and programmable speed controller.

• 12 micro tubes of 2ml/1.5ml also supplied with adopters for 0.2/05ml micro tubes
• 24 or 30 micro tubes optional avialable

JLS India Serum Centrifuge Machine Bench Top is most useful for pathological labs. Brushless Maintenance free A.C. Motor without carbon. Maximum speed 3000 rpm(without load) and 2850 rpm on load. Manual Speed control. Square mild steel body duly finish in powder coating. See thru Acrylic lid with lock. Supply Completed with 8x15ml angle head.

• Brush less AC Motor-(without carbon). (Non need to change the carbons are required in other centrifuge
• Low in Noise
• Can run continously upto 8 hrs.
• Fitted with anti vibration pads.
• Maintenance free Budget Prices
• Warranty: 5 years for motor

JLS-INDIA introduced world's best Fermentor/Bioreactor system. The BIOSTAT D50/D100 is a pre-designed and configured turnkey system incorporating the most commonly requested functions and features; The equipped with a digital measurement and control system, including probes for temperature, pH, dissolved oxygen foam and four built-in peristaltic pumps.

• Complete, turnkey pilot-scale system for microbial and cell culture processes
• Open stainless steel frame design
• Jacketed stainless steel vessels, in either 50L or 100Lworking volumes
• Cooling Jacket:
• Large-scale industrial fermentors are almost always constructed of stainless steel. A fermentor is a large cylinder closed at the top and the bottom and various pipes and valves are fitted into it. The fermentor is fitted externally with a cooling jacket through which steam (for sterilization) or cooling water (for cooling) is run.
• Automatic in-situ sterilizations
• Micro-DCU controller in an IP54 stainless steel cabinet.

• The fermentor (bioreactor) types used extensively in industries are the stirred tank fermentor, airlift fermentor, and bubble column fermentor
• Please contact us for further product information and literature