Heat Exchangers #164242

Our Shell Tube Heat Exchanger finds application in diverse industries. The Shell Tube Heat Exchanger manufactured by us is capable of handling high temperature and pressure application and therefore it is preferred by most of the industries.FeaturesHigh performanceCompact and light weightLow maintenance costLow installation costHigher temperature differentialsFlexible designEasy selectionApplicationsHeating SystemsChilled Water SystemsGround Water SystemsResidential UseDistrict Heating SystemsMaximum Working PressuresDetails of Construction DN 150 DN 225 DN 300 Max. MinMax. MinMax. MinShell Side Glass Shell 2.0 bar.g Vacuum 1.0 bar.g Vacuum 0.7 bar.g Vacuum Steel Shell 3.5 bar.g Vacuum 3.5 bar.g Vacuum 3.5 bar.g Vacuum Tube Side Glass Tubes Single Pass 2.0 bar.g Vacuum 1.0 bar.g Vacuum 0.7 bar.g Vacuum Glass Tubes Single Pass 2.5 bar.g Vacuum 2.5 bar.g Vacuum 2.5 bar.g Vacuum Maximum Differential Pressures Between Tube Side and Shell SideDN 150 DN 225 DN 300 ZONE 1 3.5 bars 3 bars 2.8 bars ZONE 23.1 bars 2.7 bars 2.3 bars ZONE 32.8 bars 2.4 bars 2 bars ZONE 42.1 bars 1.8 bars 1.4 bars

We offer Coil Type Heat Exchanger which is widely used for efficient heating of the oil with continuous filtration system in various industries. It is manufactured using premium quality raw material and is equipped with latest technology.FeaturesSwift, even external heating of cooking oilResistance to heat and rustRobustly constructedCompact vertical design saves floor spaceRemovable stainless steel coilApplicationsHeating SystemsChilled Water SystemsGround Water SystemsResidential UseDistrict Heating SystemsSpecificationsCat Ref. DN d/DN1 L L1 L2 Type Actual H.T.A Free Cross Area Cm2 Max Coolant Rate Kg/hr. Jacket Cap LiterHE1.5/2 401660010085A 0.24.5 7501HE2/3.5 501660010090A 0.30 51300 1.25 HE3/3.5 801660010090A 0.35513002HE4/5 10019600100120A 0.530 24004HE4/6 100197501.00 120A 0.630 24006HE6/10 15025600100150B 0.75226009HE6/15 15025850100150B 1.25 52260011HE9/25 22525800100180B 2.00 125330018HE12/25 30025600125250B 1.6175 570025HE12/40 30025900125250B 3.1175570035HE16/40 40025600125265B 3450620060HE16/50 40025700125265B 3.80 450620070HE18/60 45040750150325C 4.20 8204800100HE18/80 45040900150325C 5.58206200110

• Coil Type Glass Heat Exchanger
• Glass Boiler
• Glass Immersion Heat Exchanger
• Product Cooler
• Hose Connector
• Shell And Tube Type Glass Heat Exchanger

There are two types of glass heat exchangers, coil type and shell and tube type.

The overall heat transfer co-efficient of borosilicate glass equipment compare favourably with many alternative process plant construction materials. This is because the smooth surfaces of the glass improve the film coefficient and reduce the tendency for fouling.
Two basic types of glass heat exchanger are described in this chapter, Coil type and Shell and Tube type. Shell and tube type heat exchangers are available with glass or Mild Steel (MS) Shells in combination with glass tube as standard. The shell, end bonnets can be supplied in other material of construction eg, CS, SS, PTFE lined, FRP, glass lined etc, depending on the process condition. The tube can also be supplied in Silicon Carbide.
Shell & Tube Heat Exchanger consists of a cylindrical shell which uses a glass tube bundle. Tubes are fixed in the tube sheet. Each tube is individually sealed by PTFE 'O' ring in the tube sheet at both ends.
Following are the advantage of using Shell & Tube heat exchangers :Larger Heat Transfer Area in single unitLow pressure dropEasy Tube Replacement.Tube can be Plugged in case of Breakage.
Glass coil type heat exchangers are available as condensers, boilers or immersion type units with heat transfer areas up to 8m2. There are no internal sealing problems as the coil is welded to the shell making a one piece unit.