Post Buy Requirement

Chemical Machinery & Plant

We are leaders in the market for providing best range of falling film absorber, Bromine Recovery Plant and Standard Typical Units

Falling Film Absorber

  • SIZE (mm) 80, 100
This is achieved in a Falling Film Absorber which is essentially a shell & tube heat exchanger in which both, gas to be absorbed and absorbing liquid, flows co-currently downward with extraction of heat by circulation of coolant in the shell. The absorbing liquid is circulated through a tank till desired concentration is achieved. The liquid flows at such a rate that the tubes do not flow full of the liquid but instead, descends by gravity along the inner walls of the tubes as a thin film. Obviously, this produces a much greater linear velocity for a given rate flow than could be obtained if the tube flowed full.The equipment works as a number of water cooled-wall columns in parallel and each tube is provided with distribution system on top to effect uniform distribution of both liquid and gas and also formation of a thin liquid film on the inner surface of the tube.
View Complete Details

Bromine Recovery Plant

The feed is acidified with 30% HCl acid and acidified feed is fed to the scrubber by pump to scrub uncondensed chlorine from vent condenser and return back to the reaction column. In some cases the part feed is preheated using effluent from the reaction column prior to the entry of reaction column and part feed is fed to the scrubber to conserve energy. Chlorine and Steam are also fed to the reaction column.In the reaction column the feed is reacted with chlorine gas & bromine is liberated instantly. This liberated bromine is stripped out of the solution by live steam. The bromine and water vapor stream leaves the top of the column and enters the condenser. Condensate falls into the Phase Separator where it forms two phases, the light aqueous phase (water) being returned to the column , while the heavy phase(Bromine) being feed the purification column. Cooling Water & Chilled Water is used as cooling media in heat exchanger provided at the top of the column to condense water vapor & Bromine.
View Complete Details

Standard Typical Units

  • Simple Distillation Unit
  • Reaction Distillation Unit
  • Fractional Distillation Unit
  • Reflux Reaction Cum Distillation Unit
  • Multi-Purpose R&D Unit
  • Mobile Vessel
  • Jacketed Cylindrical Mixing Reactor
  • Mixing Reactor
  • Storage Tank of Volume 100-500
  • Liquid-Liquid Extraction Unit
  • Solid Liquid Extraction Unit

Typical Units/ Assemblies are multi-purpose units having flexibility of utility. These units have been standardised by incorporating all basic & essential features such as heating, stirring, condensation, fractionation, cooling etc. for multipurpose use. Therefore, though termed "Package Units" from constructional viewpoint they actually serve as "Flexi Units" from utility point of view.

These units find use in educational institutions, R&D centers and industries. They can be conveniently and quickly modified according to specific process needs due to modular construction, Borosilicate glass offers additional benefits of universal corrosion resistance, visibility and cleanliness.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Chemical Machinery & Plant from Vadodara, Gujarat by Noble Glass Works P.l.
Post Buy Requirement

Chemical Machinery & Plant

We are leaders in the market for providing best range of falling film absorber, Bromine Recovery Plant and Standard Typical Units

Falling Film Absorber

  • SIZE (mm) 80, 100
This is achieved in a Falling Film Absorber which is essentially a shell & tube heat exchanger in which both, gas to be absorbed and absorbing liquid, flows co-currently downward with extraction of heat by circulation of coolant in the shell. The absorbing liquid is circulated through a tank till desired concentration is achieved. The liquid flows at such a rate that the tubes do not flow full of the liquid but instead, descends by gravity along the inner walls of the tubes as a thin film. Obviously, this produces a much greater linear velocity for a given rate flow than could be obtained if the tube flowed full.The equipment works as a number of water cooled-wall columns in parallel and each tube is provided with distribution system on top to effect uniform distribution of both liquid and gas and also formation of a thin liquid film on the inner surface of the tube.
View Complete Details

Bromine Recovery Plant

The feed is acidified with 30% HCl acid and acidified feed is fed to the scrubber by pump to scrub uncondensed chlorine from vent condenser and return back to the reaction column. In some cases the part feed is preheated using effluent from the reaction column prior to the entry of reaction column and part feed is fed to the scrubber to conserve energy. Chlorine and Steam are also fed to the reaction column.In the reaction column the feed is reacted with chlorine gas & bromine is liberated instantly. This liberated bromine is stripped out of the solution by live steam. The bromine and water vapor stream leaves the top of the column and enters the condenser. Condensate falls into the Phase Separator where it forms two phases, the light aqueous phase (water) being returned to the column , while the heavy phase(Bromine) being feed the purification column. Cooling Water & Chilled Water is used as cooling media in heat exchanger provided at the top of the column to condense water vapor & Bromine.
View Complete Details

Standard Typical Units

  • Simple Distillation Unit
  • Reaction Distillation Unit
  • Fractional Distillation Unit
  • Reflux Reaction Cum Distillation Unit
  • Multi-Purpose R&D Unit
  • Mobile Vessel
  • Jacketed Cylindrical Mixing Reactor
  • Mixing Reactor
  • Storage Tank of Volume 100-500
  • Liquid-Liquid Extraction Unit
  • Solid Liquid Extraction Unit

Typical Units/ Assemblies are multi-purpose units having flexibility of utility. These units have been standardised by incorporating all basic & essential features such as heating, stirring, condensation, fractionation, cooling etc. for multipurpose use. Therefore, though termed "Package Units" from constructional viewpoint they actually serve as "Flexi Units" from utility point of view.

These units find use in educational institutions, R&D centers and industries. They can be conveniently and quickly modified according to specific process needs due to modular construction, Borosilicate glass offers additional benefits of universal corrosion resistance, visibility and cleanliness.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us