N. K. Machines Pvt. Ltd. Indore, Madhya Pradesh

We are the eminent Horizontal Wire Enamelling Plant Manufacturer and Supplier in Indore, Madhya Pradesh, India. These Horizontal Wire Enamelling Plants are the Machines through which the enamel is applied on the surface of Copper / Aluminum. In Horizontal Enamelling Plants the ovens are horizontally mounted, the hot air flows with induced draft only (with Air Blower Control). Normally for the thicker wires & strips – longer ovens are required for better soaking time and hence are produced in vertical enamelling plants. If thicker Wires / Strips are processed in Horizontal Ovens then following problems may occur : The Wires / Strips will have SAG Problem due to heavy cross sectional weight Because of SAG the Wires / Strips will not run in the centre of the Oven The Enamel Applied will not be uniform on the Surface and will be oval Finer wires can be processed in horizontal ovens since all the above problems are minimized for finer wires. Horizontal Wire Enamelling Plant Are The Combination Of Drawing of Wires / Rolling of Strips through – Wire Drawing Machine/ Strip Rolling Machine Feeding the bare copper / Aluminium Wires – Strips – from Pay Offs Softening of the Wires / Strips through - Preannelers Application of Enamel on the surface – Varnish Application System Baking the Enamel Film in - Ovens Re - Application of Enamel on the surface – Varnish Application System Re - Baking the Enamel Film in - Ovens Above item 3 & 4 are repeated and the repetition No is called – No of Passes Pulling of the Finished Wires / Strips from the oven on – Take Up Winding of finished Wires / Strips – Winding Units Layer wise winding on spools – Traversing Units Controlling of all the plant through – Control Panel In some of the Imported Enamelling Plants the Wire Drawing Machines are the part of Enamelling Plants and are connected In-Line with Enamelling Plants. Used For Producing Super Enamelled Copper Wires from 0.5 MM to 0.07 MM (25 SWG TO 45 SWG) Specifications SWG Range Oven Length No. of Lines Preanneler Length Oven No. of Passes 25 to 38 3 .5 Mtrs. 8 /12 /18 3.5 Mtrs. Com/ Indv 8 / 10 30 to 40 2.5 Mtrs 12 /18 3 Mtrs. Com/ Indv 8 40 to 47 3 Mtrs. 12 2 Mtrs. Com/ Indv 8

We have come up with highly functional Vertical Wire Enamelling Plants for the clients. These Vertical Wire Enamelling Plants are used to apply enamel on the surface of copper / aluminum. In Vertical Wire Enamelling Plants, where the ovens are vertically mounted the hot air flows in upward direction with natural draft (Hot air always goes up) and with induced draft (with Air Blower Control). Our Vertical Wire Enamelling Plants are easy to operate and maintain. Also, these Vertical Wire Enamelling Plants can be obtained at market leading prices. Vertical Wire Enamelling Plant Are The Combination Of Drawing of Wires / Rolling of Strips through – Wire Drawing Machine/ Strip Rolling Machine Feeding the bare copper / Aluminium Wires – Strips – from Pay Offs Softening of the Wires / Strips through - Preannelers Application of Enamel on the surface – Varnish Application System Baking the Enamel Film in - Ovens Re - Application of Enamel on the surface – Varnish Application System Re - Baking the Enamel Film in - Ovens Above item 3 & 4 are repeated and the repetition No is called – No of Passes Pulling of the Finished Wires / Strips from the oven on – Take Up Winding of finished Wires / Strips – Winding Units Layer wise winding on spools – Traversing Units Controlling of all the plant through – Control Panel Used For Producing Super Enamelled Copper / Aluminium Wires from 6 MM to 0.5 MM (6 SWG - 25 SWG) Specifications SWG Range No. of Zones No. oF Lines Preanneler Length Common Oven No. of Passes 6 to 14 3 and 1/2 1/2 8 Mtrs. Common 12 15 to 24 3 4 /6/ 8 /10/ 12 7 Mtrs. Common 8 20 to 30 2 and 1/2 4 /6/ 8 /10/ 12 5 Mtrs. Common 8 8 to 24 3 8 /12 7 Mtrs. Duel 8 / 12