Nivz Valves & Automation

Nikol, Ahmedabad, Gujarat

Nivz Pot Type Casted Body Basket strainer remove damage causing particulate matter from the process media, protecting system components such as flow meters, pumps, mechanical seals and spray nozzles. The particulate matter is captured in the strainer basket. The line is then temporarily shut down and the basket removed for cleaning or replacement.

Nivz Valves & Automation manufacturing Basket Type construction with suitable material. Basket filter provide ease of cleaning the element without interruption to the process. Simplex basket filters in cast construction are called pot strainers or bucket strainer. Filters are manufactured up to 8 NB (DN200) size and filtration down up to 5 micron. Low press drop, large dirt holding capacity, ease & low cost of maintenance are some special features of Flair Basket Filters.

These strainers reduce downtime for cleaning due to their construction of bolted cover and easy removal of screen. Self cleaning type basket filter also do manufacturing by Nivz Valves & Automation.

Nivz Valves a leading Pot Type Simplex Basket Strainer Manufacturer, Cast Steel Body Basket Strainer Exporter, Supplier, Stockist, Importer, Pot Type Strainer - Filters.

Salient Features of Pot Type Simplex Basket Strainer (Cast Body)

• Compact Size and Medium weight
• Large dirt holding capacity, long cleaning cycle time.
• Low pressure drop across the filter
• Adequate strength of element and housing
• Permits rapid servicing i.e. ease of cleaning or replacing the element
• Low cost Initial as well as service cost
• Component or parts suitable for and compatible with hydraulic fluid concerned.
• Interchangeability of component with another of same type.

A Strainer is basically mechanical product which has a provision to remove hard particle of pipe line subject to selection of perforated punched hole sheet or wire mesh degree of filtration, pipe line process media can be in form of liquid or gas. Baket Type strainer is a one types of filter strainer which uses to remove a foreign particle of industrial process line.

Inside element of strainer body element shape is like a basket so it called Basket Type Filters & Strainers.

Selection of Strainer is base on Net Filtration Area; however net filtration is more pressure drop less. General practice minimum 3 times filtration area is required to proper function of strainer and reduces cleaning time. For special viscous media filtration area will increase for satisfactory performance of strainer.

Nivz bucket type strainers remove damage causing particulate matter from the process media, protecting system components such as flow meters, pumps, mechanical seals and spray nozzles.

Basket type filter feature top removal of the screen. The screen is in the form of a basket, with a lifting handle, so that all particulate captured and retained by the screen can be easily removed for disposal.

The particulate matter is captured in the strainer basket. The line is then temporarily shut down and the basket removed for cleaning or replacement.

Advanced dynamic flow path and large filtration area elements ensure low pressure drops and reduced maintenance periods.

These strainers reduce downtime for cleaning due to their construction of bolted cover and easy removal of screen. They are ideal for very fine straining.

Nivz manufacture basket type strainer with high filration area which help to reduce pressure drop and less clearning period.

We have broad experience to Manufacture, Export and Supply of Industrial Y Type, Basket Strainer - Filter in application of Chemical, Oil, PNG, LPG, CNG, Gas, Petrochmical, Hot Oil, Lube Oil, Water, Air media with Differential Pressure Gauge.

We exported our manufacturing range of Basket type Strainers to country Saudi Arabia, United Arab Emirates, Iran, Egypt, Indonesia, Jordan, America, Australia, Zimbabe, Tanzania, Mobaza, Dar Es Salaam, Luxembourg, Lime Peru, Japan, Pakistan, Sri Lanka, Nigeria, Vietnam, Romania, Scotland, Kuwait, Malaysia, Qatar, Iraq, Thailand, Cuba, Singapore, Mexico, South Africa, Kenya, Yemen, Bahrain, Philippines, Zambia, Australia, Poland, New Zealand, Switzerland, Oman, Holland, Portugal and Belgium.

Nivz supply Gun Metal, Bronze, Brass, Duplex Steel, Super Duplex Steel, Alloy 20, Hast Alloy C, A 106 GR. B, IS 2062, A 516 GR. 60-70, Carbon Steel NACE MR0175 Standard Casted Body Strainer also do manufacuring and exporting by Nivz.

Basket Type Strainer cover options are Bolted Cover, Davit Arm, Hinged Cover and Quick Open Type in Fabricated Body Basket Strainer.

Nivz Valves & Automation manufacturing of basket type strainer in broad combination of body materials, pressure rating and screen mesh size.

Selection of wire mesh size is very important for a life of Y Strainer element and process equipment. Over fine mesh results frequent clogging, overload on wire mesh element, reduce life of element and pressure drop increase of pipe line. In case of course selection it damage costly equipment and meaningless to install strainer.

Nivz Valves & Automation is Fabricated Y Type Strainer Flanged End Manufacturer - Exporter, Supplier, Stockist, SS304L, 316L Super Duplex Steel, Alloy 20 Material Fabricated Body Y Type Strainer, Lower Pressure Drop Fabricated High Performance Fabricated Y Type Strainer, Bolted Cover and Drain Vent Arrangement Provision, Quick Open Type Strainer Manufacturers.

Nivz Valves An ISO 9001:2015 Certfied company Fabricated Y Type Strainer Manufacturer - Exporter, Supplier, Stockist, Importer and available in ready stock.

High Filtration Area with Pleated Wooven Type Duplex Basket Strainer manufacture and exporter to Singapore, Vietnam, Romania, Scotland, Saudi Arabia, United Arab Emirates, Thailand, Japan, Egypt, Kuwait, Indonesia, Muscat, Turkey, Philippines, Malaysia, South Africa, Kenya, Bahrain, Sri Lanka, Nigeria and many more.

Duplex Type Basket Strainer shaped like a basket and usually installed in a vertical cylinder. Duplex Basket Strainer is very easy to clean, since foreign particle is captured in the basket after change over the valve without getting plant shut-down. It can also sometimes offer more straining surface area than a plate strainer, improving flow rates, or decreasing pressure loss through the strainer.

Duplex Type Basket Filter elements are generally made from stainless steel (S.S. 304/316/304L/316L/Duplex Steel/Super Duplex Steel/Monel/Hast Alloy) for corrosion resistance & long life performance. Nivz Duplex Basket Strainer manufacture for Water, Lube Oil, CNG-LPG Gas, Air, Moisture, Chemical, Oil-Gas-Petrochemical Media Filters.

Nivz Valves a leading Duplex Type Basket Strainer Manufacturer, Exporter, Stockist, Supplier. Lube Oil Cooler Duplex Type Filter Supplier, Cooling Water, Oil, Gas Application Duplex Filter, Quick Open, Davit Arm Cover Duplex Basket Filter Strainers.

Duplex Type Basket Strainer Basket Element Construction:All Filter Baskets (Filter Elements) are fabricated from stainless perforated sheet. The relevant degree of filtration is provided by welding the appropriate grade of Stainless Steel mesh to the basket

Boltd Cover Y Type Strainer Manufacturing Size Range:DN25/25mm/1"/One Inch, DN32/32mm/1-1/4"/One and Quarter Inch, DN40/40mm/1-1/2"/One and Half Inch, DN50/50mm/2/Two Inch, DN65/65mm/2-1/2/Two and Half Inch, DN80/80mm/3/Three Inch, DN100/100mm/4/Four Inch, DN125/125mm/5/Five Inch, DN150/150mm/6/Six Inch, DN200/200mm/8/Eight Inch, DN250/250mm/10/Ten Inch, DN300/300mm/12/Twelve Inch, DN350/350mm/14/Fourteen Inch, DN400/400mm/16/Sixteen Inch, DN 450/450mm18/Eighteen Inch, DN500/500mm/20/Twenty Inch, DN550/550mm/22/Twenty Two Inch, DN600/600mm/24/Twenty Four Inch Size and big more large size of strainer can manufacture and supply on order basis.

A Strainer is basically mechanical product which has a provision to remove hard particle of pipe line subject to selection of perforated punched hole sheet or wire mesh degree of filtration, pipe line process media can be in form of liquid or gas. Y Type strainer is a one types of filter strainer which uses to remove a foreign particle of industrial process line.

As a design look of this Strainer is English Alphabet Y shape, so it is called a Y Type Strainer and the same also familiar by the name of Y Type Filter too. Selection of Strainer is base on Net Filtration Area; however net filtration is more pressure drop less. General practice minimum 3 times filtration area is required to proper function of strainer and reduces cleaning time. For special viscous media filtration area will increase for satisfactory performance of strainer.

Bolted Cover Y Type Strainer has inside perforated sheet duly wire mesh lined & spot welded cylindrical shape heavy duty element, if it cleans media above 200 Micron then called Strainer and Filtering finer than 200 micron it is a Filter. In both case body material of y strainer remain same just inside wire element change as per customer required degree of filtration or mesh size.

Selection of wire mesh size is very important for a life of Y Strainer element and process equipment. Over fine mesh results frequent clogging, overload on wire mesh element, reduce life of element and pressure drop increase of pipe line. In case of course selection it damage costly equipment and meaningless to install strainer.

Advantages of use Y Strainer is to save and increase a life of Pump, Pressure Equipment, Mechanical Seals, Expensive Control Valves, Pressure Reducing Valve, Flow Meter and gives foreign particle less final product. An advantage to Y strainer is, it can be mount in either vertical or horizontal but in both case cover portion must be on down side to collect foreign particle and easy to clean at time of cover opening.

Nivz each Bolted Cover design Y Strainer have provision of blow down plug at cover which allow to clean cylindrical screen element without removing from body and without disturbing a process.

Nivz Valves & Automation manufacturing of y type strainer in broad combination of body materials, pressure rating and screen mesh size.

Nivz Y Type Strainer Manufacturer - Exporter, Supplier, Stockist, Bolted Cover Y Strainer, Y Type Filter, SS304L, 316L, Duplex Steel, Super Duplex Steel, Alloy 20, Hastelloy C22, Hastelloy C276 Material Y Type Strainer in Flanged End, Quick Open, Low Pressure Drop Y Strainer. Our product range cover Duplex Steel - D2205 / 4A, A 890 GR 5A, 1.4470, 1.4462, CD4MCU, Hard Rubber Lined, Steam Jacketed & Fabricated body Y Type Strainer for high filtration area.