Other Products / Services #4864129

The Gripshaw is a simple home built device similar to a hand pulled rickshaw. It can be used with a Steadicam or handheld camera to make lengthy tracking shots and Sit down/Stand up chase situations more interesting!

The Mo-Sys Lambda is a highly precise motion control head.Navigate through its simple, intuitive touch-screen and program a series of moves in mere seconds. Its that easy.An all-in-one motion control & remote head designed for filmmaking that is industry-renowned for its strength, precision, and versatility.Its modular design means you can add a 3rd axis for roll capability.

• One of the strongest heads on the market with a payload of 50kg (110 lbs), making it suitable for 3D camera rigs
• Zero backlash, no delay unlike ordinary worm gear drives
• High resolution drive for smooth operation and crisp responsiveness
• Quick set-up due to a unique plug & play design and simple Mo-Sys bus cabling system
• Simple, intuitive touchscreen control
• Unrivalled ease of adjustment
• Can be underslung, getting the lens closer to the floor than a geared head.
• With the slip ring fitted option, the Lambda head is capable of continuous, multi-turn 360 degree rotation in all axes without the worry of cable wraps.

• Frame accurate recording and repetition in sync with the camera
• Simple, intuitive touch screen control
• Unique plug & play set up
• Full interface to full production
• Upgradeable by email (upgrade kit required)
• Moves can be downloaded to a laptop by USB
• Optional real time motion capture output for VR
• Simple cabling using Mo-Sys bus in a daisy chain network

The Scorpio Arm is a complete Camera Car. Camera movements are executed from a Mercedes ML 350, remote controlled from inside, creating images that are more stable, dynamic compared to other systems.The arm operator, head operator, focus puller and DOP, communicate among themselves and with the precision driver with wireless head phones, and view the images from 5 high resolution monitors (HD and SDI).The design of our arm allows putting the camera at a height, maintaining the Centre of Gravity closer to the car than any other Russian arm or Scorpio arm built so far internationally.Its digital control allows pre-recorded positions, set limits, movement memory and makes the system efficient and reliable.

• Gyro stabilization in the TILT axis
• Versatile arm configurations: 12, 14 and 18
• Limits, speed control and damping control are available from the control desk
• Controlled from joystick situated inside the car
• Send the position of each axis constantly like a Motion Capture
• Record and repeat all movements of each axis like a Motion Control
• Go to a fixed position with switch for safety purpose
• Max. Weight with maximum payload and standard configuration (12): 365kg

Measuring distance just became easier with the CINE TAPE MEASURE System. This versatile ultrasonic system continuously calculates the distance between a subject and the cameras film-plane. By continuously measuring distance during a shot, small or subtle subject movements are no longer a problem. With non-stop measurements, focusing a camera lens is simplified which saves time, avoids retakes and reduces production costs.The control displays accurate distance measurements from the constant stream of data that is received by the sensors.The CINE TAPE MEASURE System is a small, rugged, lightweight, and quiet ultrasonic range finder. It is compatible with all lenses, film cameras and video cameras. In addition, it is easy to set up and use, making it the first choice of professional filmmakers.

Cine Tape Measure ControlCINE TAPE MEASURE CONTROL is the brain of the system. A simple one-time Film-Plane offset adjustment programs the relationship of the film plane to the sensor position. When the control detects a subject, the green Sense LED glows and the calculated distance is shown on the LED display in either feet-inches or meters-centimeters. Adjustable brightness levels for the large red LED display offers comfortable viewing under different lighting conditions. The digital Sensitivity adjustment feature fine-tunes the system range, which is also helpful with different subject reflectivity. The Close Focus feature sets the minimum sense distance. Objects within this area are disregarded. All of the functions are set and stored digitally, which safeguards against accidental changes and provides accurate repeatability between units.Sensor AssemblyThe innovative SENSOR ASSEMBLY consists of two small cone-shaped horns, a miniature pan tilt mechanism, a mounting stud, and an electrical connector. The horns send and receive ultrasonic signals that are used to calculate the distance measurement. Mounting the SENSOR ASSEMBLY onto a camera package is simple with the combo stud. With its pan and tilt adjust/lock knobs, aiming the horns towards the subject is quick and straightforward. The SENSOR ASSEMBLY interfaces to the control via a short detachable Sensor Cable. A spring-loaded holder permits laser pens to be attached parallel to the sensors, providing a visual reference during calibration.

The Mo-Sys Lambda is a highly precise motion control head.Navigate through its simple, intuitive touch-screen and program a series of moves in mere seconds. Its that easy.An all-in-one motion control & remote head designed for filmmaking that is industry-renowned for its strength, precision, and versatility.Its modular design means you can add a 3rd axis for roll capability

We believe in eciency and organised equipment on set.It is necessary to reduce labour and man hours spent on basics like transportation.Storage solutions on set, improved access to gear and optimised assemblyprocess are all a breeze to handle with Customised carts.All our gear such as Steadicam, Remote Heads, Drones and Crane weights istransported from vehicle to set to in customised handcarts and trolleys. Assembly and storage on set and shifting within the set is also a one man operation!These versatile Carts are available for both sales and rentalto Production houses, and rental houses that like to function eciently.

One of the strongest heads on the market with a payload of 50kg (110 lbs), making it suitable for 3D camera rigsZero backlash, no delay unlike ordinary worm gear drivesHigh resolution drive for smooth operation and crisp responsivenessQuick set-up due to a unique plug & play design and simple Mo-Sys bus cabling systemSimple, intuitive touchscreen controlUnrivalled ease of adjustmentCan be underslung, getting the lens closer to the floor than a geared head.With the slip ring fitted option, the Lambda head is capable of continuous, multi-turn 360 degree rotation in all axes without the worry of cable wraps.