Salient Feature

• Pipe Line Strainers Design code Mfg. Std. (NVIL).
• Free Flow Area Minimum Three times across Sectional area of Inlet Pipe.
• Fine Finish & Smooth Contours to reduce the Pressure drop in Strainer.
• Bolted Body With Cover.
• Removable filtering Screen elements.
• Drain Plug is provided in Larger Size to Drain the Foreign particles accumulated in the strainer.
• Face to Face Dimensions As per NVIL.
• Flanged Ends Dimensions Confirms to ANSI B 16.5/ ANSI B 16.1 / BS 10 - Table-"D" & "F" / PN-16 / PN-40 / JIS / IS.
• Screwed Ends to BSP / BSPT / NPT.
• Socket Weld Ends to ANSI B 16.11.

Option

• Wire mesh liners.
• Optima element materials.
• ANSI 125# can be given at specific request of the user.
• On request with Drain plug.
• On request with discharge valves.
• Lifting Hook Arrangement.
• On Request With Vent Design.
• Fabricated Strainers available on Request.

SIZE :1" (25MM) to 36" (900MM).

CLASS :-125# / 150# / 300# / 600# / PN-40 / PN-16 / Table - "E" & "F".

Salient Feature

• Meet design requirement standard of ASME B 16.34 / BS 5351 /API 6D / ISO -14314 andtesting requirement standard BS 6755 / API 598 / ISO 5280 /API 6D.
• Fire safe testing comforts to API 607 /API 6FA and BS 6755.
• Fire safe design: - valves' fire safe is designed in accordance with API 607. when non-metal sealing
• material are decomposed by plant fire the ball comes into contact with the edge of the metal seat ofthe body or connecter by the line pressure in the upstream to shut off the line fluid to minimize internal leakage through the valve bore (port).
• Soft seating recommended for service temperature up to 220'c. Metal to metal seating offered for higher temperature.
• PTFE seats are located in grooves well protected against damage and cold flow of seal under pressure. The metal lip acts as a secondary metallic seat in fine safe design.
• Anti static devices ensures electrical continuity between ball, stem & body.
• Flexible lip-seats compensate for wear and changes of pressure.
• Anti blow out stem construction.
• Long operation life with low torque design.
• Zero leakage from gland side due to PTFE"V"- shape gland packing.
• A bottom back seals enabling repacking when the valves are under pressure.
• Trunnion mounted ball provide for more then 4" size in higher class.
• Specially designed die-formed graphite packing controlled clearances between stem and gland for guaranteed low emission meets 100 PPM maximum Fugitive emission levels.
• Ball is heart of ball valves. Low operating due to mirror finish surface of ball controlled Sphericty up to 0.02 mm.
• Bearing pads fix the ball and absorb total thrust of the medium relieving the down stream sealing of the load.
• A valve with trunnion supported ball having two floating & spring loaded seats, In closed position they provide blockage of flow from both end when the cavity Pressure is drained.
• Flange end dimensions conforms to ASME B 16.5/ API 605/ BS 3293 /DIN.
• Face to face end dimensions conforms to ASME B 16.10 / API 6D.Face to face end dimensions conforms to ASME B 16.10 / API 6D.
• Butt welding end dimensions conforms to ASME B 16.25.

Option

• Electro less Nickel coated ball are also available on request.
• Locking arrangement design in request.
• Gear, electric actuator or pneumatic actuator available.
• Extended gland designed provided for low temperature and cryogenic services (cold box and non cold box applications) to conform to requirement of BS- 6364.
• Sealant injection design available on customer request.Ring joint facing available in higher class.

New Developed

• Metal to Metal High Pressure Ball Valve on request.
• Ball Valve 1500# 2500# Class Design on request.

• The valves are designed to ensure that ball port fully aligns with body throat port in fully open position.
• The blow out proof over size steam operated the valve safety even at high differential pressure a seal enabling replacement of gland packing even when valve may under pressure.
• Bi- directional shut off
• Ball is a heart of ball valves. Owing to the accurate manufacturing the ball is extremely spherical. Its mirror finish surface increase the sealing life and low operating torque.
• High flow capacity with negligible pressure loss.
• Unique flexible lip seats exert continues sealing pressure automatically compensate for wear and for changes in temperature & pressure, and provide extremely high cycle life.
• Full port valve offers and resistance to flow operation is always easy, even when valves are operated infrequently.
• The valve wrench (handle) is always parallel the flow passage of the valve.
• Joints between bodies and body connectors in the case of flanged valve do not affect normal bolting or unbolting connection pipe works.
• Body design provides adequate resistance against any permanent distortion under hydrostatic test and working condition.
• Screwed end valves intended for assembly with pipe threads according to IS-554/BSP thread.
• Flanged end valves are supplied undrilled unless other wise specified by the customer at the time of placing order with us along with standard in which drilling is desired

Option

• Design available with mounting pad conforming to ISO for easy actuator adaptation.
• Electro less nickel plating ball are also available on request.
• Locking arrangement
• Gear box, electric or pneumatic actuator design available
• Single Piece, Two piece design available on request
• We can offer valves under X-ray quality on request

Salient Feature

• Pipe Line Strainers Design code Mfg. Std. (NVIL).
• Free Flow Area Minimum Three times across Sectional area of Inlet Pipe.
• Fine Finish & Smooth Contours to reduce the Pressure drop in Strainer.
• Bolted Body With Cover.
• Removable filtering Screen elements.
• Drain Plug is provided in Larger Size to Drain the Foreign particles accumulated in the strainer.
• Face to Face Dimensions As per NVIL.
• Flanged Ends Dimensions Confirms to ANSI B 16.5/ ANSI B 16.1 / BS 10 - Table-"D" & "F" / PN-16 / PN-40 / JIS / IS.
• Screwed Ends to BSP / BSPT / NPT.
• Socket Weld Ends to ANSI B 16.11.

Option

• Wire mesh liners.
• Optima element materials.
• ANSI 125# can be given at specific request of the user.
• On request with Drain plug.
• On request with discharge valves.
• Lifting Hook Arrangement.
• On Request With Vent Design.
• Fabricated Strainers available on Request.

SIZE :1" (25MM) to 36" (900MM).

CLASS :-125# / 150# / 300# / 600# / PN-40 / PN-16 / Table - "E" & "F".

Salient Feature

• Meet design requirement standard of ASME B 16.34 / BS 5351 /API 6D / ISO -14314 andtesting requirement standard BS 6755 / API 598 / ISO 5280 /API 6D.
• Fire safe testing comforts to API 607 /API 6FA and BS 6755.
• Fire safe design: - valves' fire safe is designed in accordance with API 607. when non-metal sealing
• material are decomposed by plant fire the ball comes into contact with the edge of the metal seat ofthe body or connecter by the line pressure in the upstream to shut off the line fluid to minimize internal leakage through the valve bore (port).
• Soft seating recommended for service temperature up to 220'c. Metal to metal seating offered for higher temperature.
• PTFE seats are located in grooves well protected against damage and cold flow of seal under pressure. The metal lip acts as a secondary metallic seat in fine safe design.
• Anti static devices ensures electrical continuity between ball, stem & body.
• Flexible lip-seats compensate for wear and changes of pressure.
• Anti blow out stem construction.
• Long operation life with low torque design.
• Zero leakage from gland side due to PTFE"V"- shape gland packing.
• A bottom back seals enabling repacking when the valves are under pressure.
• Trunnion mounted ball provide for more then 4" size in higher class.
• Specially designed die-formed graphite packing controlled clearances between stem and gland for guaranteed low emission meets 100 PPM maximum Fugitive emission levels.
• Ball is heart of ball valves. Low operating due to mirror finish surface of ball controlled Sphericty up to 0.02 mm.
• Bearing pads fix the ball and absorb total thrust of the medium relieving the down stream sealing of the load.
• A valve with trunnion supported ball having two floating & spring loaded seats, In closed position they provide blockage of flow from both end when the cavity Pressure is drained.
• Flange end dimensions conforms to ASME B 16.5/ API 605/ BS 3293 /DIN.
• Face to face end dimensions conforms to ASME B 16.10 / API 6D.Face to face end dimensions conforms to ASME B 16.10 / API 6D.
• Butt welding end dimensions conforms to ASME B 16.25.

Option

• Electro less Nickel coated ball are also available on request.
• Locking arrangement design in request.
• Gear, electric actuator or pneumatic actuator available.
• Extended gland designed provided for low temperature and cryogenic services (cold box and non cold box applications) to conform to requirement of BS- 6364.
• Sealant injection design available on customer request.Ring joint facing available in higher class.

New Developed

• Metal to Metal High Pressure Ball Valve on request.
• Ball Valve 1500# 2500# Class Design on request.

• The valves are designed to ensure that ball port fully aligns with body throat port in fully open position.
• The blow out proof over size steam operated the valve safety even at high differential pressure a seal enabling replacement of gland packing even when valve may under pressure.
• Bi- directional shut off
• Ball is a heart of ball valves. Owing to the accurate manufacturing the ball is extremely spherical. Its mirror finish surface increase the sealing life and low operating torque.
• High flow capacity with negligible pressure loss.
• Unique flexible lip seats exert continues sealing pressure automatically compensate for wear and for changes in temperature & pressure, and provide extremely high cycle life.
• Full port valve offers and resistance to flow operation is always easy, even when valves are operated infrequently.
• The valve wrench (handle) is always parallel the flow passage of the valve.
• Joints between bodies and body connectors in the case of flanged valve do not affect normal bolting or unbolting connection pipe works.
• Body design provides adequate resistance against any permanent distortion under hydrostatic test and working condition.
• Screwed end valves intended for assembly with pipe threads according to IS-554/BSP thread.
• Flanged end valves are supplied undrilled unless other wise specified by the customer at the time of placing order with us along with standard in which drilling is desired

Option

• Design available with mounting pad conforming to ISO for easy actuator adaptation.
• Electro less nickel plating ball are also available on request.
• Locking arrangement
• Gear box, electric or pneumatic actuator design available
• Single Piece, Two piece design available on request
• We can offer valves under X-ray quality on request