Ahmedabad, Gujarat, India
Our Products
| SR NO | DESCRIPTION | PART NO | M.O.C. | |||
| 1 | LIQUID CHAMBER | 5001 | P.P. | |||
| 2 | AIR COVER | 5002 | GFPP | |||
| ALU. | ||||||
| 3 | SUCTION BEND | 5003 | P.P. | |||
| 4 | DISCHARGE BEND | 5004 | P.P. | |||
| 5 | SUCTION DISCHARGE TEE | 5005 | P.P. | |||
| 6 | HOLDING PLATE | 5006 | M.S. | |||
| 7 | LOCK NUT | 5007 | NEOPRENE | |||
| TEFLON | ||||||
| 8 | DIAPHRAGM | 5008 | NEOPRENE | |||
| VITON | ||||||
| NITRILE | ||||||
| EPDM | ||||||
| BUTYL | ||||||
| TEFLON | ||||||
| SANTOPRENE | ||||||
| 9 | BACKUP DIAPHRGM FO TEFLON | 5009 | NITRILE | |||
| 10 | NRV BALLS | 5010 | TEFLON | |||
| NEOPRENE | ||||||
| 11 | BALL SEAT | 5012 | P.P. | |||
| 12 | SEAT "O" RING | 5013 | NEOPRENE | |||
| VITON | ||||||
| 13 | TEE "O" RING | 5015 | NEOPRENE | |||
| VITON | ||||||
| 14 | TEE CLAMPS | 5016 | M.S. | |||
| S.S. | ||||||
| 15 | SUCTION DISCHARGE CLAMP | 5017 | M.S. | |||
| S.S. | ||||||
| 16 | CHAMBER CLAMP | 5018 | M.S. | |||
| S.S. | ||||||
| 17 | MOUNTING PADS | 5021 | NEOPRENE | |||
| 18 | BALL CAGE | 5024 | P.P. | |||
| 19 | CHAMBER CLAMP BOLTS | CB3 | S.S. | |||
| 20 | SUCTION DISCHARGE CLAMP BOLT | CB4 | S.S. |
| SR. NO | DESCRIPTION | PART NO | M.O.C. | |
| 1 | SHAFT BLOCK | 5551 | GFPP | |
| 2 | MAIN SHAFT | 5552 | STEEL | |
| 3 | PILOT BUSH | 4053 | BRASS | |
| 4 | PILOT SHAFT | 4054 | S.S. | |
| 5 | PISTON RING | 5568 | PLASTIC | |
| 6 | AIR COVER GASKET | 5555 | GRAPHITE | |
| 7 | PISTON BLOCK COVER GASKET | 5556 | GRAPHITE | |
| 8 | PISTON BLOCK GASKET | 5557 | GRAPHITE | |
| 9 | PISTON BLOCK COVER | 5559 | GFPP | |
| 10 | PISTON BLOCK CAP CIRCLIP | 5560 | STEEL | |
| 11 | PISTON BLOCK CAP | 5561 | HDP | |
| 12 | PISTON BLOCK | 5562 | GFPP | |
| 13 | PISTON | 5563 | ALUMINIUM | |
| 14 | PISTON BLOCK CAP "O" RING | 5564 | NEOPRENE | |
| 15 | PILOT BUSH "O" RING | 4065 | NEOPRENE | |
| 16 | EXHAUST | 5566 | GFPP | |
| 17 | PISTON "O" RING | 5567 | NEOPRENE | |
| 18 | AIR NIPPLE | 5569 | BRASS | |
| 19 | SHAFT BLOCK "O" RING | 4071 | NEOPRENE | |
| 20 | PILOT BUSH RING | 4072 | BRASS | |
| 21 | MAIN SHAFT BUFFER | 5573 | NEOPRENE | |
| 22 | PILOT SAHFT BUFFER | 5574 | NEOPRENE | |
| 23 | AIR COVER BOLT | LN3 | STEEL | |
| 24 | P.B. HOLDING BOLT | LN4 | STEEL |
This Models Has high motor rating of 7.5kW has become a standard for vacuum ejectors for its Discharge head of 4 kg/cm.
| MODEL | SUCTION | DELIVERY | IMPELLR DIA | HP | RPM | CAPACITY in m³/hr HEAD in mm | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ASH-40 | 50 | 40 | 190 | 12.5 | 2900 | 40 25 | 35 30 | 30 35 | 25 40 | 10 45 | 0 50 |
PART LIST FOR ASH Series-40 PUMP
| SR.NO | PART NAME | M.O.C | PART NO |
| 1 | Volute casing | Polypropylene | 40-1 |
| 2 | Back Plate | Polypropylene | 40-2 |
| 3 | Impeller | Polypropylene | 40-3 |
| 4 | Adopter | Cast Iron | 40-4 |
| 5 | Leg | Cast Iron | 40-5 |
| 6 | Cage Ring | Cast Iron | 40-6 |
| 7 | Adopter Ring | Cast Iron | 40-7 |
| 8 | Suction Flange | Polypropylene | 40-8 |
| 9 | Adopter Flange | Polypropylene | 40-9 |
| 10 | Locating Flange | Hylem | 40-10 |
| 11 | Diflector | Polypropylene | 40-11 |
| 12 | Drip Tray | Polypropylene | 40-12 |
| 13 | Bolt For Clamp | P.P - S.S. | 40-13 |
| 14 | Bearing Housing | Cast Iron | 40-14 |
| 15 | Bearing Cover | Cast Iron | 40-15 |
| 16 | Hard Ware | M.S Cad PI. | 40-16 |
| 17 | Bare Shaft | SS 410 | 40-17 |
| 18 | Shaft Sleeve | Ceramic | 40-18 |
| 19 | Bearing (Inboard) | Steel | 40-19 |
| 20 | Bearing (Outboard) | Steel | 40-20 |
| 21 | Circlip | Steel | 40-21 |
| 22 | Star Washer | Steel | 40-22 |
| 23 | Lock Nut | Steel | 40-23 |
| 24 | Oil Seal(40X25X10) | Neoprene | 40-24 |
| 25 | Oil Seal(72X35X10) | Neoprene | 40-25 |
| 26 | O' Ring | Neoprene | 40-26 |
| 27 | Stationary (Mech.Seal) | Ceramic | 40-27 |
| 28 | Rotary (Mech.Seal) | GFT | 40-28 |
| 29 | Sleeve Gasket | PTFE | 40-29 |
| 30 | Constant Level Oiler | ABS Plastic / Allu | 40-30 |
| 31 | Cage Ring Hard Ware | SS 304 | 40-31 |
| 32 | Cover | Cast Iron | 40-32 |
| 33 | Cover bush | Cast Iron | 40-33 |
