Our Products
Industrial Steel
2 Products availableMetal & Alloy Wires
2 Products availableMetal & Metal Products
2 Products availableSteel Plates, Sheets, Bars & Rods
1 Products availableMetal Angle
1 Products availableSteel Round Bars
1 Products availableSafety Products
1 Products availableTricon
Our brand of construction steel is a high strength steel bar where the diameter of the reinforced bar is lowered without compromising in strength of the reinforcement leading to substantial savings in steel and cost.
Thermo Mechanically Treated bars (TMT bars) replaced CTD bars in the late 1990s as they were considered technically superior and also
convenient for the rolling mills. Post production cold twisting was a cumbersome, time consuming and labour intensive job and often a bottleneck in production.
“TRICON”, high strength deformed bars conforming to IS : 1786 - 2008, in Grade Fe 550 corresponding to DIN : 488 and BS : 4483 are
manufactured by using the well-established technology of simultaneous cold rolling and cold ribbing.
Details
Product | Description | Diameter | Lengths | Coating | Application |
---|---|---|---|---|---|
TRICONTM | High Strength deformed steel bars (ribbed) | 3.5mm to 10.45mm | 1m to 12m (As per customer specification) | Black | Used in general reinforcement of concrete structures,buildings etc. |
TRICONTM (Galvanised) | Galvanised (zinc coated) High Stength Deformed steel bars (ribbed) | 3.5mm to 5mm | 1m to 12m (As per customer specification) | 40gsm-400gsm of zinc coating | Used in general reinforcement of concrete structures, buildings etc. and fencing. The product offers superior corrosion protection increasing the life of the structures. |
Metal Liners is a railway component used as packing between the Elastic rail clip and the foot of the rail while laying tracks. Liners have high durability, dimensional stability and the ability to withstand different weather conditions.
Specifications - T 3738, T 3740, T 3741 & T 3742
High Tensile Galvanised Steel Wire or ACSR Core Wire may be supplied as single wire or also in seven strands. Manufactured, conforming to various International Standards to the specific requirement of customers.
Product Standards : ASTM B498 - 93 Class A Coating
Nominal Diameter | Size Tolerance | Ultimate Tensile Strength Minimum | Stress at 1% Extension Minimum | % Elongation Minimum | Zinc Coating Minimum | Wrapping Mandrel Dia | ||||
---|---|---|---|---|---|---|---|---|---|---|
From | To | + | - | Mpa | Kg/mm2 | Mpa | Kg/mm2 | GL = 250 mm | g/m2 | mm |
1.524 | 1.902 | 0.038 | 0.025 | 1450 | 148 | 1310 | 133 | 3 | 198 | 3d |
1.905 | 2.283 | 0.038 | 0.025 | 1450 | 148 | 1310 | 133 | 3 | 214 | 3d |
2.286 | 2.639 | 0.051 | 0.051 | 1410 | 144 | 1280 | 130 | 3.5 | 229 | 4d |
2.642 | 3.045 | 0.051 | 0.051 | 1410 | 144 | 1280 | 130 | 3.5 | 244 | 4d |
3.048 | 3.553 | 0.076 | 0.051 | 1410 | 144 | 1240 | 126 | 4 | 259 | 4d |
3.556 | 4.569 | 0.102 | 0.076 | 1380 | 141 | 1170 | 119 | 4 | 274 | 5d |
4.572 | 4.822 | 0.102 | 0.076 | 1380 | 141 | 1170 | 119 | 4 | 305 | 5d |
Product Standards : IS : 398 (Part II)
Nominal Diameter | Size Tolerance | Cross Sectional Area | Approx Weight | Breaking Load KN | Zinc Coating | ||
---|---|---|---|---|---|---|---|
mm | mm | mm2 | Kg/Km | Before Stranding | After Stranding | Minimum Weight of Coating g/m2 | No. of 1 Min Cudips mm |
1.50 | ± 0.03 | 1.767 | 13.78 | 2.46 | 2.34 | 190 | 2 |
1.57 | ± 0.03 | 1.936 | 15.10 | 2.70 | 2.57 | 190 | 2 |
1.96 | ± 0.04 | 3.017 | 23.53 | 4.20 | 3.99 | 210 | 2 |
2.11 | ± 0.04 | 3.497 | 27.27 | 4.60 | 4.37 | 210 | 2½ |
2.30 | ± 0.05 | 4.155 | 32.41 | 5.46 | 5.19 | 230 | 2½ |
2.59 | ± 0.05 | 5.269 | 41.09 | 6.92 | 6.57 | 230 | 3 |
3.00 | ± 0.06 | 7.069 | 55.13 | 9.29 | 8.83 | 240 | 3 |
3.18 | ± 0.06 | 7.942 | 61.95 | 10.43 | 9.91 | 250 | 3 |
3.35 | ± 0.07 | 8.814 | 68.75 | 11.58 | 11.00 | 250 | 3 |
3.53 | ± 0.07 | 9.787 | 76.34 | 12.86 | 12.22 | 250 | 3 |
4.09 | ± 0.08 | 13.140 | 102.48 | 17.27 | 16.41 | 275 | 3½ |
Product Standards : BS 50189 : 2000 Grade - Mechnical Properties (British Standard)
Nominal Diameter | Size Tolerance | Ultimate Tensile Strength Minimum | Stress at 1% Extension Minimum | % Elongation Minimum | No of Torsion | Wrapping Mandrel Dia | |||
---|---|---|---|---|---|---|---|---|---|
From | To | +/- | Mpa | Kg/mm2 | Mpa | Kg/mm2 | GL = 250 mm | g/m2 | mm |
1.50 | 1.75 | 0.03 | 1400 | 143 | 1170 | 119 | 3 | 18 | 1d |
1.75 | 2.25 | 0.03 | 1400 | 143 | 1170 | 119 | 3 | 18 | 1d |
2.25 | 2.25 | 0.04 | 1350 | 137 | 1140 | 116 | 3 | 16 | 1d |
2.75 | 3.00 | 0.05 | 1350 | 137 | 1140 | 116 | 3.5 | 16 | 1d |
3.00 | 3.50 | 0.05 | 1300 | 132 | 1100 | 112 | 3.5 | 14 | 1d |
3.50 | 4.25 | 0.06 | 1300 | 132 | 1100 | 112 | 4 | 12 | 1d |
4.25 | 4.75 | 0.06 | 1300 | 132 | 1100 | 112 | 4 | 12 | 1d |
4.75 | 5.00 | 0.07 | 1300 | 132 | 1100 | 112 | 4 | 12 | 1d |
Product Standards : IS : 398 (Part V)
Nominal Diameter | Size Tolerance | Cross Sectional Area | Approx Weight | Breaking Load Minimum | Zinc Coating | ||
---|---|---|---|---|---|---|---|
mm | mm | mm2 | Kg/Km | KN | Kg/mm2 | Minimum Weight of Coating g/m2 | No. of 1 Min Cudips mm |
3.53 | ± 0.07 | 9.79 | 76.34 | 12.86 | 1312 | 250 | 3 |
2.30 | ± 0.05 | 4.16 | 32.41 | 5.63 | 574 | 230 | 2½ |
2.54 | ± 0.05 | 5.07 | 39.52 | 6.87 | 700 | 230 | 2½ |
Zinc Coating : BS 443 : 1982
Nominal Diameter | Size Tolerance | Ultimate TensileStrength Minimum | |
---|---|---|---|
From | To | +/- | 1 Minute |
1.55 | 1.80 | 200 | 2 |
1.80 | 2.24 | 215 | 2 |
2.24 | 2.72 | 230 | 2½ |
2.72 | 3.15 | 240 | 3 |
3.15 | 3.55 | 250 | 3 |
3.55 | 4.25 | 260 | 3 |
4.25 | 5.00 | 275 | 3½ |
5.00 | 5.50 | 290 | 3½ |
Features:
Steel angles are L-shaped structural steel represented by dimensions of sides and thickness. For example, 50x50x6 denotes, both sides of angles are 50mm and thickness is of 6mm. Angles are of various sizes and may be of equal or unequal angles. They are primarily used in steel fabrication.
Specifications - Sizes manufactured by us ranges from 35x35x5 to 75x75x12.
Galvanised Barbed wires are primarily used as security barriers. Wires are available in various constructions as per customers’ designs. Most common used is 2 strand 2.50mm and 2.00mm.
Features:
MIG (Metal Inert Gas) welding wire is used in Gas Metal Arc Welding along with a shielding gas. MIG wire is produced adhering to the highest quality standards with ER70S-6 specifications. Some of the salient features that our MIG wire offers are as follows:
Steel rounds have a diverse application, they as used by forging industries, bright bar industries, auto-ancillaries, foundation and anchor bolts, pins, rollers, bushes, and many more engineering industries.
Specifications - Sizes manufactured by us ranges from 20mm to 45mm.
Hot-rolled strips offer extensive performance characteristics, versatility and economy, in addition to having dedicated properties for specific applications. We manufacture strips mainly to cater to the ERW Pipe industry. Our strips are also used for general engineering purposes like manufacturing cable supports, etc.
Fish plates are used in railway construction, it is a metal bar that is bolted to the ends of two rails to join them together in a track. The top and bottom edges are tapered inwards so the device wedges itself between the top and bottom of the rail when it is bolted into place.
We manufacture 8 types of fish plates as per designs of Indian Railways, however, we are equipped for custom made designs as per other specifications.
Hot rolled flats have their primary use in steel fabrication and general engineering purposes.
Specifications - Sizes up to 150 mm in width.
We manufacture stick welding electrodes of consistent quality conforming to international standards. Apart from having a versatile product range, we also aim to offer customized solutions to distinguish our products.