Verified
Write a Review
Our Products
Transmitter Device
2 Products availableTemperature Controller
2 Products availableWe offer a complete product range of Weight Indicator, Controller, Humidity Indicators, Humidity Indicators/Controllers, RPM Indicators and Energy Saving Devices TR Indicator
Additional Information:
Payment Terms : Western Union
Delivery Time : 1 week after the confirmation of the order
HC 2000 is a brainchild of Nippon Technologies. State-of -the-art micro controller design is a high performance solution for various HUMIDITY applications. It accepts two 4-20 mA inputs. One for Humidity and another for Temperature. Generally the signal comes from humidity transmitters. Typical applications
| Input | From Humidity/Temperature Transmitter. (Dry / Wet bulb input available on request) |
| Display | 2 sets of (4+4) digit diaplay. Upper for Temperature and lower for Humidity |
| Range | Humidity 0 to 96.0 % RH Temperature -20 to 80.0 ºC, depending on type of Transmitter. |
| Resolution | Relative Humidity 0.1 RH Temperature 0.1 ºC |
| Output | 2 Relays. A) Humidity Control: One relay for Humidification, second for relay for Dehumidification. B) Temperature Control: One relay for cooling (Comprosessor / Blower), Second relay for Heating (Heater) |
| Control Accuracy | ± 3 % for Humidity / ± 0.25 % for Temperature |
ENERCON2002 is used for monitoring the efficiency of compressors. For subzero temperature BRINE is used for cooling. The process parameters temperature, flow and density are used for measuring TR.
| Inputs | I. 4-20 mA form Volumetric Flow meters---(A) II. The temperature of inlet and outlet of compressor is measured Two R.T.D.'s(T1-T2)---(B) |
| Range | -40 to 0 °C |
| Supply | 90-260 VAC , 50 Hz |
| Logic | One constant is to be derived depending on density and viscosity of BRINE---(C ) A*B*C Is the TR of Compress |
2023-3F is 2-set pont indicator/controller in FLP housing. 2023-3F has 2 sets of press to set pushbuttons & potentiometers
2023-3F can be designed for Heater/Heater, Heater/Alarm, or Alarm / Alarm logic. Other details same as nippon 2020F and nippon 1010F .
| Model No. | Sensor | Range | Calibration accuracy |
Resolution ºC / ºF |
| nippon 1010F | Pt-100 |
-100.0 to 199.9 ºC -148.0 to 199.9 ºF |
0.25% | 0.1 |
| nippon 1010F | Pt-100 |
-100.0 to 600.0 ºC -148.0 to 1112 ºF |
0.25% | 1 |
| nippon 1010F | Iron / Constantan (J) |
-100.0 to 600.0 ºC -150.0 to 1112.0 ºF |
1% | 1 |
| nippon 1010F | Chrome / Alumel (K) |
-80.0 to 1200.0 ºC -112.0 to 1999.0 ºF |
0.7% | 1 |
|
Enclosure Certification |
Enclosure is certified by C.M.R.S., Dhanbad |
| Gas Group | IIA & IIB as per IS 2148/1981 |
| Degree Protection | IP 55 as per IS 2147/1962 |
| Material of Construction | Diecast alloy LM6 |
| Cable Entries | Maximum 2 Nos., 3/4" ET Standard and 1/2" B.S.P. / N.P.T. (Optional for indicators) |
| Display Window | +Made from toughened type 'A' clear glass as per IS 2206. |
| Mounting | Wall / structure, 2 holes. |
| Dimension | 200(H) X 140(W) X 90(H) dimensions in mm. (for indicators) |
| Weight | LM6-2Kg |
| Finish | Light Grey Epoxy, shade no. 631 as per IS-5 |
| Rating | 10 Amp, 500 Volts |
| Earthing | 1 terminal outside |
| Inputs | R.T.D.'s like PT-100, PT-50, 4-20mA, 0-1 VDC, & all types of thermocouples. |
| Range, accuracy, Resolution | Refer Table-A |
| Display | 3 1/2 digits, bright 7 segment L.E.D.'s (ht12.5mm) |
| Sensor Open | Display indicates "1" |
| Cold Junction Compensation | Automatic |
| Supply Voltage | Standard: 230 VAC ±10%, 50Hz, Optional: 110 VAC / 24 VDC. |
1010-3F is a small but versatile 3 1/2 digit, digital temperature indicator in flameproof housing. The instrument is suitable for hazardous area of class IIA & IIB as per IS2148/1981
1010-3F is having wide application in Chemical, Petrochemical, pharmaceuticals, Fertilizer & Oil plants where accurate temperature indication is required in highly inflammable atmosphere.
.
| Model No. | Sensor | Range | Calibration accuracy |
Resolution ºC / ºF |
| nippon 1010F | Pt-100 |
-100.0 to 199.9 ºC -148.0 to 199.9 ºF |
0.25% | 0.1 |
| nippon 1010F | Pt-100 |
-100.0 to 600.0 ºC -148.0 to 1112 ºF |
0.25% | 1 |
| nippon 1010F | Iron / Constantan (J) |
-100.0 to 600.0 ºC -150.0 to 1112.0 ºF |
1% | 1 |
| nippon 1010F | Chrome / Alumel (K) |
-80.0 to 1200.0 ºC -112.0 to 1999.0 ºF |
0.7% | 1 |
| Enclosure Certification | Enclosure is certified by C.M.R.S., Dhanbad |
| Gas Group | IIA & IIB as per IS 2148/1981 |
| Degree Protection | IP 55 as per IS 2147/1962 |
| Material of Construction | Diecast alloy LM6 |
| Cable Entries | Maximum 2 Nos., 3/4" ET Standard and 1/2" B.S.P. / N.P.T. (Optional for indicators) |
| Display Window | +Made from toughened type 'A' clear glass as per IS 2206. |
| Mounting | Wall / structure, 2 holes. |
| Dimension | 200(H) X 140(W) X 90(H) dimensions in mm. (for indicators) |
| Weight | LM6-2Kg |
| Finish | Light Grey Epoxy, shade no. 631 as per IS-5 |
| Rating | 10 Amp, 500 Volts |
| Earthing | 1 terminal outside |
| Inputs | R.T.D.'s like PT-100, PT-50, 4-20mA, 0-1 VDC, & all types of thermocouples. |
| Range, accuracy, Resolution | Refer Table-A |
| Display | 3 1/2 digits, bright 7 segment L.E.D.'s (ht12.5mm) |
| Sensor Open | Display indicates "1" |
| Cold Junction Compensation | Automatic |
| Supply Voltage | Standard: 230 VAC ±10%, 50Hz, Optional: 110 VAC / 24 VDC. |
6060 Is an accurate digital speed (R.P.M.) indicator for measuring R.P.M., rates per minute. etc It is widely used in centrifuges, stirrers, pharmaceutical and laboratory equipments, digital read outs, control panels, drives, textiles, chemicals plants. etc
Six point selection switch is available to select the channels. The selector switch is heavy duty & zero contact resistance.
Highly accurate & reliable
Glass Epoxy single board design
Thermocouples, RTD's & other inputs
Wide temperature range
| Model No. | Sensor | Range | Calibration accuracy |
Resolution ºC / ºF |
| nippon 1010A | Pt-100 (2,3 wire) |
-100.0 to 600.0 ºC - 148.0 to 1112.0 ºF |
0.25% | 0.1 |
| nippon 1010 | Pt-100 |
-100.0 to 199.9 ºC - 148.0 to 199.9 ºF |
0.25% | 0.1 |
| nippon 1010 | Pt-100 |
-100.0 to 600.0 ºC - 148.0 to 1112.0 ºF |
0.25% | 1 |
| nippon 1010 | Iron / Constantan (J) |
-100.0 to 600.0 ºC - 148.0 to 1112.0 ºF |
0.1% | 1 |
| nippon 1010 | Chrome / Alumel (K) |
-80.0 to 1200.0 ºC - 112.0 to 1999.0 ºF |
0.7% | 1 |
| nippon 1010 | Pt / Rh (R, S) |
-900.0 to 1600.0 ºC - 1652.0 to 1999.0 ºF |
0.5% | 1 |
| Specifications: | ||||||||||||||||||||
|
1010F is a small but versatile 3 1/2 digit, digital temperature indicator in flameproof housing. The instrument is suitable for hazardous area of class IIA & IIB as per IS2148/1981.
1010F is having wide application in Chemical, Petrochemical, pharmaceuticals, Fertilizer & Oil plants where accurate temperature indication is required in highly inflammable atmosphere.
Highly accurate & reliable
Glass Epoxy single board design
Attractive & small housing
| Model No. | Sensor | Range | Calibration accuracy |
Resolution ºC / ºF |
| nippon 1010F | Pt-100 |
-100.0 to 199.9 ºC -148.0 to 199.9 ºF |
0.25% | 0.1 |
| nippon 1010F | Pt-100 |
-100.0 to 600.0 ºC -148.0 to 1112 ºF |
0.25% | 1 |
| nippon 1010F | Iron / Constantan (J) |
-100.0 to 600.0 ºC -150.0 to 1112.0 ºF |
1% | 1 |
| nippon 1010F | Chrome / Alumel (K) |
-80.0 to 1200.0 ºC -112.0 to 1999.0 ºF |
0.7% | 1 |
| Specifications: | ||||||||||||||||||||||||||||||||||||
|
1016F is a 6 channel temperature indicator. Here 6 different channels are connected to 1 instrument. 6 way heavy duty switch is provided for selection of channels .
1016F is designed for 3 1/2 digit indicator. It has 7 cable entries. The dimensions are 360 mm (H) X 180 mm (W) X 150 mm (D).
1016F offers excellent space & cost saving. Customised 4 1/2 digit display available.
Highly accurate & reliable
Glass Epoxy single board design
Attractive & small housing
Nippon100L and Nippon2020L series is state of art Loop Power Indicators cum Controllers.The series is designed with robust microcontroller. Nippon100L and Nippon2020L series is software linearised indicator offering excellent accuracy on 4digit LCD. The range and decimal points are truly configurable
| Principle | Microcontroller Based | |
| Display | 4 Digits LCD Display and negative sign indication | |
| Range | Programmable -9999 to +9999 | |
| Decimal Point | Auto Ranging, programmable and intelligent shifting type | |
| Accuracy | 0.01 % of Full Scale | |
| Display Update Rate | 0.05 seconds | |
| Response Time | 0.5 seconds | |
| Input | 4-20mA | |
| Output | 4-20mA | |
| Loop Drop | 3 Volts | |
| No signal | No indication as no power to the circuit | |
| Setting | By soft-touch elegant, sturdy and user friendly membrane keys | |
| Set Points | 2 set Points with hysteresis | |
| Outputs | 2 TTL Outputs corresponding to Each Set point, Open collector o/p (1 Amp | |
| Logic | Load) with terminals for external supply load. | |
| Power Supply | Normal or Reverse Programmable for Each Set point | |
| Design | No Power Supply required | |
| Enclosure | Sturdy, Robust and Modular • 96H x 96W x 110D DIN Size • Flameproof Enclosure Wall mounting type, Certified by CMRS, Dhanbad • Flameproof Enclosure Pipe Mounting type, Certified by CMRS, Dhanbad • PCB for OEM applications |
|
1010F-1 is indicator with 1 inch (25mm) display in FLP housing. The large size display helps to monitor process from longer distance. Other specifications same as Nippon 1010F.
| Model No. | Sensor | Range | Calibration accuracy |
Resolution ºC / ºF |
| nippon 1010F | Pt-100 |
-100.0 to 199.9 ºC -148.0 to 199.9 ºF |
0.25% | 0.1 |
| nippon 1010F | Pt-100 |
-100.0 to 600.0 ºC -148.0 to 1112 ºF |
0.25% | 1 |
| nippon 1010F | Iron / Constantan (J) |
-100.0 to 600.0 ºC -150.0 to 1112.0 ºF |
1% | 1 |
| nippon 1010F | Chrome / Alumel (K) |
-80.0 to 1200.0 ºC -112.0 to 1999.0 ºF |
0.7% | 1 |
| Enclosure Certification | Enclosure is certified by C.M.R.S., Dhanbad |
| Gas Group | IIA & IIB as per IS 2148/1981 |
| Degree Protection | IP 55 as per IS 2147/1962 |
| Material of Construction | Diecast alloy LM6 |
| Cable Entries | Maximum 3 Nos., 3/4" ET Standard and 1/2" B.S.P. / N.P.T. (Optional for indicators) |
| Display Window | +Made from toughened type 'A' clear glass as per IS 2206. |
| Mounting | Wall / structure, 2 holes. |
| Dimension | 200(H) X 140(W) X 90(H) dimensions in mm. (for indicators) |
| Weight | LM6-2Kg |
| Finish | Light Grey Epoxy, shade no. 631 as per IS-5 |
| Rating | 10 Amp, 500 Volts |
| Earthing | 1 terminal outside |
| Inputs | R.T.D.'s like PT-100, PT-50, 4-20mA, 0-1 VDC, & all types of thermocouples. |
| Range, accuracy, Resolution | Refer Table-A |
| Display | 3 1/2 digits, bright 7 segment L.E.D.'s (ht12.5mm) |
| Retransmission | 4 - 20 mA or 0 - 1 VDC on request. |
| Sensor Open | Display indicates "1" |
| Cold Junction Compensation | Automatic |
| Supply Voltage | Standard: 230 VAC ±10%, 50Hz, Optional: 110 VAC / 24 VDC. |
Nippon Instruments (india) Pvt. Ltd. (nippon instruments (india) pvt. ltd.)
106, Shivsagar Ind. Estate opp Kotkar Road, Off Vishveshwar Road, Goregaon (East), Mumbai, Maharashtra - 400063
Share us via
View Contact Number 
