Mumbai, Maharashtra, India
Verified
Add Review
Our Products
5050-B, 5050 & 5050-6 are unique digital Presettable Counters with and without memory having wide applications in textile Industries for meter counting, Pharmaceutical - chemical - Food Industries for event counting, packing machinaries, machine tool engineering for stroke counting and many other areas where accurate counting is involved.
Instrument accepts signals from Photo Sensors, Proximity Switches, Limit Switches, Contact closures, Encoders, Voltage Pulses . etc. Instrument can work upto 2 KHZ. of switching frequency. The Incoming signal is filtered, conditioned, wave shaped with help of filters and choppers. The signal is fed to Synchronous counter I.C. which drives seven segment display. At the same time signal is compared with set value. At the set point relay change over takes place. The Relay can be operated in Delayed On, Delayed Off, Auto Reset modes as per the application.
| Range | 0-99, 999, 9999, 99 99 99 Counts. |
| INPUTS | Limit Switches, Proximity Switches, Photo Sensors, Encloder,Voltage Pulses, Contact Closures....etc... |
| MAXIMUM FREQUENCY | Upto 2 KHZ. |
| COUNTING ACCURACY | Cent - Percent. |
| DISPLAY | 3, 4 or 6 digit bright Seven Segment display. |
| LIMIT SETTING | By Thumbwheel Switches. |
| LOGIC | Delayed On, Delayed Off, Auto reset, Auto reset with timer. |
| MODE | Count Up. (Count Down on request) |
| OUTPUT | Relay (O.E.N.) Changeover rated at 230 V/6A. |
| SUPPLY | 30 VAC ±10 %, 50 Hz. |
| Box | 96 (H) X 96 (W) X 180 (D), mm DIN size box with modular system. Also available in 72 (H) X 72 (W) X 110 (D) mm |
"NIPPO FLOW" series is designed with help of State-of-art micro controllers. The instruments can measure Flow accurately, it accepts signals, from FLOW TRANSMITTERS and calculates flow rate and also integrates the same. The 4 digit indicator displays the instantaneous flow rate and 10 digit counter displays TOTAL FLOW.
| INPUTS | 4-20 mA, or Volt Pulses. |
| RANGE | Flow Totaliser - 10 digits. Flow Rate - 0-9999 Units (Lit/Min or Kg/Hr or Tons/Hr or M3/Hr) |
| ACCURACY | Cent Percent |
| DISPLAY | 10 digits bright seven segment display for Flow Totaliser. 4 digits bright seven segment display for Flow Rate |
| PARAMETER SETTING | By soft touch, Elegant, Sturdy & user friendly membrane key pads. |
| MEMORY | 10 years NVRAM. |
| COMPUTER INTERFACE | RS232 or RS 485, MODBUS available. |
| SUPPLY | 90-260 VAC, 50 Hz, SMPS |
| AMBIENT CONDITION | Temp 55°C & Relative Humidity 99% |
| RETRANSMISSION | Available • 4-20 mA for Flow rate. • Pulses for Flow Counts. |
| SET POINTS | 2 Nos, Possible for Flow rate & Flow Totaliser. |
| OUTPUT | 2 Relays, rated 230 V / 6 Amp. |
| BOX | 96(H) X 192(W) X 180(D) Din Size box with modular design. Also available in FLAMEPROOF ENCLOSURES For Hazardous application. |
NIPPO FLOW" series is designed with help of State-of-art micro controllers. The instruments can measure Flow accurately, it accepts signals, from FLOW TRANSMITTERS and calculates flow rate and also integrates the same. The 4 digit indicator displays the instantaneous flow rate and 10 digit counter displays TOTAL FLOW.
| INPUTS | 4-20 mA, or Volt Pulses. |
| RANGE | Flow Totaliser - 10 digits. Flow Rate - 0-9999 Units (Lit/Min or Kg/Hr or Tons/Hr or M3/Hr) |
| ACCURACY | Cent Percent |
| DISPLAY | 10 digits bright seven segment display for Flow Totaliser. 4 digits bright seven segment display for Flow Rate |
| PARAMETER SETTING | By soft touch, Elegant, Sturdy & user friendly membrane key pads. |
| MEMORY | 10 years NVRAM. |
| COMPUTER INTERFACE | RS232 or RS 485, MODBUS available. |
| SUPPLY | 90-260 VAC, 50 Hz, SMPS |
| AMBIENT CONDITION | Temp 55°C & Relative Humidity 99% |
| RETRANSMISSION | Available • 4-20 mA for Flow rate. • Pulses for Flow Counts. |
| SET POINTS | 2 Nos, Possible for Flow rate & Flow Totaliser. |
| OUTPUT | 2 Relays, rated 230 V / 6 Amp. |
| BOX | 96(H) X 192(W) X 180(D) Din Size box with modular design. Also available in FLAMEPROOF ENCLOSURES For Hazardous application. |
