Nimbus Technologies

Dombivli, Thane, Maharashtra

Each product in our range is made using reliable materials procured from leading vendors. Thus, our products are trustworthy. All those who are looking for a responsible name supplying Zigbee Wireless Solution can get in touch with us!

Features :

• Encoder/Frequency/Counter Input Module
• 8 Up Counter/Frequency Channels or 4 Encoder Input Channels
• Programmable Digital Filter
• 32-bit Counter
• Individual Channel Configuration
• Virtual Battery Backup to Preserve Counter Values
• ±4 kV ESD Protection
• Preset Values for Counter Input

iP-8411-MRTU series is a Modbus serial I/O expansion unit to expand I-8K and I-87K series I/O modules over the serial port for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules. It is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 30 VDC), isolated power input and can operate under wide temperature (-25 +75 °C). To simplify installation and maintenance of I/O modules, it provides many useful features, such as: auto configuration, LED indicators for fault detection, dual watchdog to keep alive, programmable power on and safe values for safety.

Modbus is a very wide known protocol in the industrial manufacturing and environment monitoring fields. Many SCADA software, HMI and PLC has builtin driver to support Modbus devices. Besides, we also provide SDK on different platforms, such as Windows XP, Window CE 5.0/6.0, Linux, MiniOS7. Therefore, it is very easy to integrate remote I/O to customer’s applications.

Features :

• Supports Modbus RTU/ASCII Slave
• Auto Configuration
• LED Indicators for Fault Detection
• 4 I/O Slots for I-8K and I-87K Series Modules 
• Operating Temperature: -25 +75 °C

Feel free to get to approach us for placing orders and stay assured for timely and safe deliveries! Catering to the varied demands of customers, we make accessible the product basket from Thane(India).

The I-8410 is an embedded serial slave I/O expansion unit using DCON Protocol Firmware. ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.

The CPU is a 8-bit 80188 (40 MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.

Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc. The I/O modules can be easily added to the I-8410/I-8810 and can be quickly integrated into an existing system.

Features :

• 80188 or compatible (8-bit and 40 MHz)
• MiniOS7 Embedded Operating System (DOS-like)
• Slave I/O unit with DCON protocol (ASCII-based protocol )
• Support I/O configuration with DCON Utility
• Built-in Watchdog
• 7-Segment display x 5
• Serial Port x 3 (RS-232 or RS-485 communication Interface)
• 4 Slots for I-8K and I-87K Modules
• Operating Temperature: -25 +75 °C

The I-8094F and I-9094F are 4-axis stepping/pulse-type servo motor control modules that can be used on the programmable automation controller (PAC) series provided by ICP DAS, and are suitable for general-purpose motion applications. The I-8094F/ I-9094F have the full functions of the I-8094/I-9094 with the addition of an FRnet port, which allows the fast remote I/O of the module to be expanded easily. This two-wired FRnet can automatically scan its 128 DI and 128 DO channels within a period of 2.88 ms. In addition to their wide speed range, these intelligent motion controllers also have a variety of motion control functions built in, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/deceleration, numerous synchronous actions, automatic homing, and others. A major advantage is that the majority of the I-8094F/I-9094F motion control functions are performed by the high-performance motion ASIC with little load on the processor. While driving the motors, the motion status, and the status of the other I/O channels on the PAC modules, can still be monitored. As the CPU loading requirements of the I-8094F/I-9094F is minimal, one or more motion modules may be used with a single PAC controller. ICP DAS also provides a wide range of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-effective solution for motion control application developers.

For keeping the quality of the products intact, our quality experts check all levels including procurement of raw materials, production, packaging and dispatch. The company laid its foundation stone in Thane(India) and caters to the market with its wide range.

Since inception, our company has upheld its policy to make timely delivery. Thus, we guarantee to deliver products to buyers doorsteps on the dates promised. Our effective and excellent quality analysis helps us in delivering the best in class range of products.

We are immensely recognized for delivering the orders within the stipulated time frame and at desired Thane(India). We are committed towards providing quality-assured products and thus we keep a strict check on the production procedure.

Ebox computer for Embedded And Mobile Application : Ranked among top suppliers of Ebox computer for Embedded And Mobile Application, we can provide the product at economical prices. We are committed towards providing the world-class lot of products thus, check each and every product on different levels.

The PET-7H16M/PET-7H24M is a high speed data acquisition devices with a built-in POE Ethernet communication port for data transfer over a network. PET-7H16M includes 8 high-speed 16-bit single-ended Analog input channels (200 kHz sample and hold for all 8 channels) and PET-7H24M includes 4 high-speed 24-bit differential Analog input channels  (128 kHz sample and hold for all 4 channels). All high speed data acquisition modules allow A/D signal conversion simultaneously on each channel and provide the programmable input range on all analog input channels. In addition to supporting Analog Input channels, the module also provides Digital Input / Digital Output / Counter / Encoder with different combinations and different numbers of channels.

The module provides a programmable input range on all analog Input channels, and the Digital Output can be set to output with short-circuit and overload protection. The counter value of DI counters and High-speed counter are latched by ADC sampling time synchronously. The Encoder Input channel can be configured as Quadrant, Pulse/Direction or CW/CCW input mode. The module provides 4 kV ESD protection as well as 2500 VDC intra-module isolation.

The PET-7H16M/PET-7H24M supports more kinds of trigger modes for A/D conversion: software A/D trigger, external clock trigger, external digital signal event trigger (Post-trigger/Pre-trigger/Delay-trigger) and analog trigger. The software trigger can acquire a sample whenever needed, and the continuous A/D acquisition or the acquisition of N data samples begins after the command is triggered. In external clock trigger mode, the speed of the A/D acquisition and the amount of data acquired are controlled by external electrical signals. In digital signal event trigger mode, the A/D acquisition parameters are configured via a command and the A/D acquisition of the N data samples is started while triggered by an external electrical signal. The analog trigger mode triggers when the analog input value is higher or lower than the set specific voltage value, and starts the A/D acquisition of the N data.

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC-7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

Introduction New R.H. Transmitters THR Series, with capacitive or fiber dilation sensor. Dual 4-20 mA 2-wire RH% and ºT outputs. Available types for wall rooms, chambers or process mounting. Special types for high pressure and temperature. For all types of process applications. Relative Humidity and Temperature Transmitters Dual 4-20 mA 2-wire RH% and ºT outputs Capacitive or fiber dilation sensors Wall, chambers, process mounting models Special length and remote sensor Transmitters Special types for high temperature and pressure processes Hand held hygrometers with calculation of other variables Calibration kits and accessories.

Details

• Input Type and range programmable for RTD Pt100Ω, Pt1000Ω, CU10, CU100; Thermo-couple type K, J, E, T, R, S, B
• Output 420mA with loop powered
• DIN rail mounting with
• CE Approved & RoHS

Features

• Accuracy : T/C - 0.3% Pt100Ω - 0.15%
• Wide selection of input with difference sensor type & Range.
• Dimension small.
• Low output ripple.
• High stability & low cost.

Courtesy years of experience, our company has emerged as leading suppliers of ISaGRAF Soft Logic PAC. To provide our buyers with premium products, we make sure only superior grade materials are used for manufacturing them.

For keeping the quality of the products intact, our quality experts check all levels including procurement of raw materials, production, packaging and dispatch. Owing to immense experience in this domain, we became efficient in providing quality Stainless Panel PC For Food.

All thanks to our smart inventory management owing to which safe and quick deliveries are furnished by us. We are the most promising name when it comes to 3G (WCDMA).

More About Information of 3G WCDMA Modem : The Robustel GoRugged R3000 & R2000 Lite is a rugged cellular router offering state-of-the-art mobile connectivity for machine to machine (M2M) applications. Dual SIM redundancy for continuous cellular connection.

• Supports 2G/3G/4G.
• Supports MODBUS GATEWAY.
• RS-232/485/ETHERNET.
• WAN PORT.
• RS-485/ETHERNET.
• Metal Body.

Wide distribution network, exceptional connectivity, reliable transportation facilities are some of the attributes that help us in delivering the goods on time. Since, we have stringent quality control policies, our entire range of products are trusted throughout the industry.

Details

• The TDS-700 is a series of Serial-to-Ethernet device servers designed to add Ethernet and Internet connectivity to any RS-232 and RS-422/485 device, and to eliminate the cable length limitation of legacy serial communication.
• Supports Modbus TCP/UDP master and slave.
• Supports Modbus RTU/ASCII master and slave
• The TGW-700 module is a Modbus gateway that enables a Modbus TCP/UDP host to communicate with serial Modbus RTU/ASCII devices through an Ethernet network, and eliminates the cable length limitation of legacy serial communication devices.
• MDC-700 series is a Modbus Data Concentrator that has ability to perform up to 200 Modbus/RTU commands to read/write from/to Modbus slave devices via RS-232/485 and allows up to 8 Modbus/TCP masters to get the polled data via the Ethernet.

We have trustworthy and well-organized shipping facilities available, along with this, we keep a record of the same as well, and this increases our efficiency and gains the trust of the customers. We are capable of delivering consistent and qualitative results by carrying out strict quality examinations.

Nimbus Technologies has been incorporated in 2003 by 3 technocrats with vast experience in Automation & Data Acquisition Systems. Promoters have 15 to 20 years’ experience in the Industry in Distribution & Execution of Industrial Data Acquisition Systems, PLC based Automation solutions and Communication system provider along with imparting necessary technical skills to its interns to bridge gap between industry and continuous learning process.
These programs are designed for technocrats of different engineering domains and Institutes for different duration. Any under-graduate or Post-graduate student or faculty can optimize their degree and knowledge to the maximum extent with these industry latest technical courses.

Benefits and Features

• Hands on Practical on actual in instruments are used in Industrial Automation
• Industrial Experience.
• We have the Faculty of 15 to 20 years Industrial Experience.
• Placement Guidance.

Technical Specification

• Standard Industrial Modules for Automation.
• Communication Concept.
• Practical on Wire and Wireless Module.
• Data Acquisition Software.
• PLC brief and Designing of small application.
• SCADA Programming.
• MI Programming.
• Workshop Visit to our manufacturing Plant.
• Test and Certificated Distribution.

Course Contents

• Communication Protocols.
• Basics-RS232, RS485 & RS422.
• Optical Fiber & Ethernet.
• TCP & UDP Concept.
• MODBUS, CANBUS, PROFIBUS.
• Wire Communication Modules.
• Practical Sessions on all modules.
• Data Acquisition Software and Hardware.
• Embedded Devices.
• PLC and HMI Controllers.
• Signal Conditioning.
• Standard Wiring Structure.
• SCADA Software and Designing.
• Workshop Visit @ our Manufacturing Unit.

Course

• VA: Basics Certification in Automation & Communication (7 Days)
• VB: Basics Certification in Automation & Communication  (2 Days)
• VM: Advance Certification in PLC & Scada (2 Months)
• VJ: Training Program for Engineer’s of all above subjects (2 Months)
• VN: Internship Program (1 Month)

The ET-7x00/PET-7x00, a web-based Ethernet I/O module, features a Built-in web server which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Remote control is as easy as surfing the Internet.

Besides Web HMI function, no more programming or HTML skills are required; creating dynamic and attractive web pages for I/O monitoring and I/O control would be fun to engineers ever after. The ET-7x00/PET-7x00 offers easy and safe access for users from anytime and anywhere! In addition, the ET-7x00/PET-7x00 also supports Modbus TCP protocol that makes perfect integration to SCADA software.

Furthermore, PET-7x00 features “PoE” that not only Ethernet but also power is carried through an Ethernet cable. This feature makes installation of PET-7x00 a piece of cake. Imagine that no more unnecessary wires, only an Ethernet cable takes care of everything in the field.

Features :

• Power over Ethernet (PoE)
• Daisy-Chain Ethernet Cabling
• LAN Bypass
• Communication Security
• Support for both Modbus TCP and Modbus UDP Protocols
• Built-in I/O
• Dual Watchdog
• Highly Reliable Under Harsh Environment
• I/O Pair Connection
• Power-on Value and Safe Value