Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

XW-Board is a  I/O expansion board inserted uPAC-5000, LP-51xx, and WP-51xx with Modbus protocol for expanding I/O functions. The XW-Board allows users to implement various I/O functions such as DI, DO, AI, AO, Timer/Counter, Serial Communication  I/O functions.

This manual assumes that the user has some knowledge of commissioning and programming of Modbus devices, including some knowledge of the Modbus protocol and your controller unit.

One PAC can only plug only one XW-board.The XW-board series have following common specification:

• DI channel is dry contact, sink type.
• DO channel is open collector, sink type.

There are two types of I/O communication bus, parallelbus and serial bus. The parallel bus type I/O modules (highprofile I-8K series) are high speed ones used only in thePACs including XPAC, WinPAC, iPAC, ViewPAC, etc. And theserial bus type I/O modules (high profile I-87K series) arelow speed ones used in both PACs including XPAC, WinPAC, iPAC, ViewPAC, etc., and I/O expansion units including RU-87Pn, ET-87Pn, USB-87Pn, etc.

Parallel I/O Modules (I-8KW Series) Includes

• High speed A/D: 100 k samples/second
• High speed D/A: 30 k (-10 +10 V)
• High speed DI & DO: All Digital I/O modules provide visual
• indication of status via LED indicators
• High speed stepping/Servo motion control modules
• High speed encoder modules
• High performance Counter/Frequency modules
• High speed multi-channel RS-232/422/485 modules
• CAN bus communication modules
• FRnet communication modules

Serial I/O modules (I-87KW Series) Includes

• RTD Input modules
• Thermocouple Input modules
• Strain Gauge Input modules
• VW Input modules
• High resolution multi-channel Analog Input modules
• Isolated multi-channel D/A modules
• Digital Input and Digital Output modules with Latch and
• counter function
• Counter/Frequency modules

With a range of standard communication interfaces and a dualbackplane bus permitting I/O expansion.The dual backplane bus is hybrid in nature providing the facility toconnect either serial or parallel I/O modules. 

The parallel bus isused for high speed data transfer.The unit can communicate using serial communications (RS-232, RS-485), Ethernet, or CAN bus. The Ethernet version of theproduct supports an integrated web server permitting Internet andIntranet applications.

With different communication interface, the I/O modules can be classified to high communication speed (Parallel bus) 8K series modules and low communication speed (serial interface) 87K series modules.

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC-7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

I-87K4 is an I/O expansion unit to expand I/O via the RS-485. It is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 30 VDC), isolated power input and can operate under wide temperature (-25 +75 °C). To simplify installation and maintenance of I/O modules.

There are more than 30 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules. We provide various software development kits (SDK) and demos, such as DLL, ActiveX, Labview driver, InduSoft driver, Linux driver, OPC server. The I-87K series I/O modules plugged in the I-87Kn can be easily integrated into variant software system.

Features :

• RS-485 Port for Multi-Drop Topology
• DCON Protocol
• 4 I/O Slots for I-87K Modules
• Operating Temperature: -25 +75 °C

• I/O expansion board inserted in μPAC (μPAC-7186 Series & I-7188 series) for expanding I/O function.
• The X-Board allows users to implement various I/O functions such as DI, DO, A/D, D/A, Timer/Counter, UART, flash memory, battery backup SRAM, AsicKey & other I/O functions.

RU-87P1 is a remote intelligent I/O expansion unit that used to expand I-87K series I/O modules over the RS-485 for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, and counter/frequency I/O modules.

RU-87P1 is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 30 VDC) and operating temperature (-25 °C +75 °C). It simplifies installation and maintenance of I/O modules with hot swappable and auto configuration, fault and error detection, dual watchdog, programmable power on and Safe Values.

Various software development kits (SDK) and demos are provided, such as PACSDK, LabVIEW driver, InduSoft driver, Linux driver, OPC Server, etc. The I-87K series I/O modules plugged in the RU-87Pn can be easily integrated into variant software system.

Features :

• One RS-485 Port for Multi-Drop Topology
• Hot Swap Allowed
• Auto Configuration
• LED Indicators for Fault Detection
• Switches to Configure Communication
• DCON Protocol (ASCII-based protocol)
• 1 Slot for I-87K Modules
• Operating Temperature: -25 +75 °C

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC-7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

X-Board is a small I/O expansion board inserted in μPAC (μPAC-7186 Series & I-7188 series) for expanding I/O functions. Most μPACs (except some modules like I-7188 & I-7188D) support one I/O expansion bus. Each bus can be plugged in one X-Board. The X-Board allows users to implement various I/O functions such as DI, DO, A/D, D/A, Timer/Counter, UART, flash memory, battery backup SRAM, AsicKey& other I/O functions.

Users may choose our functioned X-Boards (model number X1xx X7xx) or design their own I/O expansion boards (module number X0xx). We have designed several X-Boards for expanding the μPAC's features. If users choose a small size X-Board, then they can mount this I/O expansion board directly onto the μPAC. Customized I/O Expansion Boards can be ordered through ODM project.

Selection Guide :

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC-7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

The M-6000 series of distributed I/O provides a wide variety of input, output, and smart control solutions, all of which are based on a single universal hardware platform. The M-6000 series combines inputs and outputs, saving your time and space when both are at a premium. Since M-6000 series feature both inputs and outputs on the same board, retailers can reduce the space requirement for I/O boards by as much as 50%! Traditional I/O board schemes required retail operators to mount separate input and output boards within an enclosure, increasing the time and cost to mount the boards. The M-6000 I/O boards are communications devices needed to connect to the facility management system to control refrigeration, HVAC and lighting systems.

Features :

• RS-485 Industrial Multi-Drop Network
• Communication Protocols: Modbus RTU
• Universal Inputs and Universal Outputs
• Status LED for Universal inputs and outputs
• HVAC control, lighting control, door monitoring
• Integrated Design Allows You to Take Advantage of Inputsaud Outputs
• Any Universal I/O point can be configured as analog input/output, digital input or counter input

The M-2000 series is a family of network data acquisition and control modules with digital or analog I/O functions. The modules can be remotely controlled through an RS-485 serial bus by using DCON and Modbus RTU/ASCII protocols. The selectable transmission speed of the RS-485 port is up to 115, 200 bps. Modbus has facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. The M-2000 series is slim-type Form Factor I/O that provides the saving space for the installation, easy wiring and distributed I/O points applications. The bias resistor and terminal resistor by switch selectable that is used to improve the communication and solve the communication fail of RS-485 network.

Features :

• RS-485 Industrial Multi-Drop Network
• Communication Protocols: DCON, Modbus RTU
• Programmable I/O Type and Range
• Programmable Power-on Value and Safe Value
• Dual Watchdog Design
• 240 VrmsOverVoltage Protection for AI Modules
• Slim-Type Form Factor

The tM series is a family of network data acquisition and control modules, providing digital I/O functions. The modules can be remotely controlled through an RS-485 serial bus by using DCON and Modbus RTU protocols. The selectable transmission speed of the RS-485 port is up to 115, 200 bps. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the tM series perfect integration with the HMI, SCADA, PLC and other software systems.

Features :

• Cost-effective remote I/O modules
• Supports Modbus RTU and DCON protocols
• Isolated Digital Input and Output
• RS-485 bus supports baud rate up to 115200 bps
• Dual-watchdog with power-on and safe value
• Terminal block connector for easy wiring
• Tiny form-factor and low power consumption
• RoHs compliant with no Halogen
• Made from fire retardant materials (UL94-V0 Level)
• Easy DIN-Rail mounting

Based in Thane(India), we are in the business of supplying products that are reckoned for their quality and excellence. Interested buyers can purchase PCI Express from us in bulk and retail, as we are its reputed supplier.

Based in Thane(India), We marked our presence in the nationwide market since our products are qualitative and cost effective. With the assistance of our hardworking team, we are able to offer a wide range of quality Universal PCI.

I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer,   computer-to-sensor, digital I/O, timer/counter, RS-232 to RS-485 converter, USB to RS-485 converter, RS-485 repeater, RS-485 hub and RS-232/422/485 to Fiber Optics. I-7000 supports DCON protocol, and M-7000 modules support Modbus RTU and DCON protocols. Many SCADA/HMI software and PLCs support Modbus RTU protocol. It is easy for them to integrate with M-7000 modules.

Features :

• RS-485 Industrial Multi-Drop Network
• I/O type and Range Programmable
• Easy Mounting and Connection
• Rugged Industrial Environment
• Programmable Power-on Value and Safe Value
• DI Latch Function
• Low Speed Counter
• Overvoltage Protection
• Over-current Protection
• Virtual Channel to Channel Isolation
• Common Voltage Protection
• 3000 VDC Isolation
• Dual Communication Protocols
• Self-Tuner Inside
• Expandable Network

I-9K and I-97K series modules are provided for combining a variety of I/O functions within the WP-9000, XP-9000, LX-9000 and LP-9000 programmable automation controllers (PAC). The I-9K series is based on a parallel interface with high communication speed; while the I-97K series is based on a serial interface.

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

XW-Board is a  I/O expansion board inserted uPAC-5000, LP-51xx, and WP-51xx with Modbus protocol for expanding I/O functions. The XW-Board allows users to implement various I/O functions such as DI, DO, AI, AO, Timer/Counter, Serial Communication  I/O functions.

This manual assumes that the user has some knowledge of commissioning and programming of Modbus devices, including some knowledge of the Modbus protocol and your controller unit.

One PAC can only plug only one XW-board.The XW-board series have following common specification:

• DI channel is dry contact, sink type.
• DO channel is open collector, sink type.

There are two types of I/O communication bus, parallelbus and serial bus. The parallel bus type I/O modules (highprofile I-8K series) are high speed ones used only in thePACs including XPAC, WinPAC, iPAC, ViewPAC, etc. And theserial bus type I/O modules (high profile I-87K series) arelow speed ones used in both PACs including XPAC, WinPAC, iPAC, ViewPAC, etc., and I/O expansion units including RU-87Pn, ET-87Pn, USB-87Pn, etc.

Parallel I/O Modules (I-8KW Series) Includes

• High speed A/D: 100 k samples/second
• High speed D/A: 30 k (-10 +10 V)
• High speed DI & DO: All Digital I/O modules provide visual
• indication of status via LED indicators
• High speed stepping/Servo motion control modules
• High speed encoder modules
• High performance Counter/Frequency modules
• High speed multi-channel RS-232/422/485 modules
• CAN bus communication modules
• FRnet communication modules

Serial I/O modules (I-87KW Series) Includes

• RTD Input modules
• Thermocouple Input modules
• Strain Gauge Input modules
• VW Input modules
• High resolution multi-channel Analog Input modules
• Isolated multi-channel D/A modules
• Digital Input and Digital Output modules with Latch and
• counter function
• Counter/Frequency modules

With a range of standard communication interfaces and a dualbackplane bus permitting I/O expansion.The dual backplane bus is hybrid in nature providing the facility toconnect either serial or parallel I/O modules. 

The parallel bus isused for high speed data transfer.The unit can communicate using serial communications (RS-232, RS-485), Ethernet, or CAN bus. The Ethernet version of theproduct supports an integrated web server permitting Internet andIntranet applications.

With different communication interface, the I/O modules can be classified to high communication speed (Parallel bus) 8K series modules and low communication speed (serial interface) 87K series modules.

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC-7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

I-87K4 is an I/O expansion unit to expand I/O via the RS-485. It is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 30 VDC), isolated power input and can operate under wide temperature (-25 +75 °C). To simplify installation and maintenance of I/O modules.

There are more than 30 I/O modules supported with the unit, including analog input/output, digital input/output, counter, frequency I/O modules. We provide various software development kits (SDK) and demos, such as DLL, ActiveX, Labview driver, InduSoft driver, Linux driver, OPC server. The I-87K series I/O modules plugged in the I-87Kn can be easily integrated into variant software system.

Features :

• RS-485 Port for Multi-Drop Topology
• DCON Protocol
• 4 I/O Slots for I-87K Modules
• Operating Temperature: -25 +75 °C

• I/O expansion board inserted in μPAC (μPAC-7186 Series & I-7188 series) for expanding I/O function.
• The X-Board allows users to implement various I/O functions such as DI, DO, A/D, D/A, Timer/Counter, UART, flash memory, battery backup SRAM, AsicKey & other I/O functions.

RU-87P1 is a remote intelligent I/O expansion unit that used to expand I-87K series I/O modules over the RS-485 for industrial monitoring and controlling applications. There are more than 50 I/O modules supported with the unit, including analog input/output, digital input/output, and counter/frequency I/O modules.

RU-87P1 is designed to be used in harsh and noisy environment, so the hardware is manufactured with wide power input range (10 30 VDC) and operating temperature (-25 °C +75 °C). It simplifies installation and maintenance of I/O modules with hot swappable and auto configuration, fault and error detection, dual watchdog, programmable power on and Safe Values.

Various software development kits (SDK) and demos are provided, such as PACSDK, LabVIEW driver, InduSoft driver, Linux driver, OPC Server, etc. The I-87K series I/O modules plugged in the RU-87Pn can be easily integrated into variant software system.

Features :

• One RS-485 Port for Multi-Drop Topology
• Hot Swap Allowed
• Auto Configuration
• LED Indicators for Fault Detection
• Switches to Configure Communication
• DCON Protocol (ASCII-based protocol)
• 1 Slot for I-87K Modules
• Operating Temperature: -25 +75 °C

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC-7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

X-Board is a small I/O expansion board inserted in μPAC (μPAC-7186 Series & I-7188 series) for expanding I/O functions. Most μPACs (except some modules like I-7188 & I-7188D) support one I/O expansion bus. Each bus can be plugged in one X-Board. The X-Board allows users to implement various I/O functions such as DI, DO, A/D, D/A, Timer/Counter, UART, flash memory, battery backup SRAM, AsicKey& other I/O functions.

Users may choose our functioned X-Boards (model number X1xx X7xx) or design their own I/O expansion boards (module number X0xx). We have designed several X-Boards for expanding the μPAC's features. If users choose a small size X-Board, then they can mount this I/O expansion board directly onto the μPAC. Customized I/O Expansion Boards can be ordered through ODM project.

Selection Guide :

Following μPAC supports I/O Expansion Bus, can mount one X-Board

• For C language solution: I-7188XB(D), I-7188EX(D), μPAC-7186EX(D), μPAC-7186PEX(D), μPAC-7186EX(D)-FD, μPAC-7186EX(D)-SM
• For ISaGRAF solution: I-7188XG(D), μPAC-7186EG(D)

X-Board is Series has following common specifications

• DI channel: Dry contact, sink type, non-isolated
• DO channel: Open Collector, sink type, 100 mA/channel load current, non-isolated

The M-6000 series of distributed I/O provides a wide variety of input, output, and smart control solutions, all of which are based on a single universal hardware platform. The M-6000 series combines inputs and outputs, saving your time and space when both are at a premium. Since M-6000 series feature both inputs and outputs on the same board, retailers can reduce the space requirement for I/O boards by as much as 50%! Traditional I/O board schemes required retail operators to mount separate input and output boards within an enclosure, increasing the time and cost to mount the boards. The M-6000 I/O boards are communications devices needed to connect to the facility management system to control refrigeration, HVAC and lighting systems.

Features :

• RS-485 Industrial Multi-Drop Network
• Communication Protocols: Modbus RTU
• Universal Inputs and Universal Outputs
• Status LED for Universal inputs and outputs
• HVAC control, lighting control, door monitoring
• Integrated Design Allows You to Take Advantage of Inputsaud Outputs
• Any Universal I/O point can be configured as analog input/output, digital input or counter input

The M-2000 series is a family of network data acquisition and control modules with digital or analog I/O functions. The modules can be remotely controlled through an RS-485 serial bus by using DCON and Modbus RTU/ASCII protocols. The selectable transmission speed of the RS-485 port is up to 115, 200 bps. Modbus has facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. The M-2000 series is slim-type Form Factor I/O that provides the saving space for the installation, easy wiring and distributed I/O points applications. The bias resistor and terminal resistor by switch selectable that is used to improve the communication and solve the communication fail of RS-485 network.

Features :

• RS-485 Industrial Multi-Drop Network
• Communication Protocols: DCON, Modbus RTU
• Programmable I/O Type and Range
• Programmable Power-on Value and Safe Value
• Dual Watchdog Design
• 240 VrmsOverVoltage Protection for AI Modules
• Slim-Type Form Factor

The tM series is a family of network data acquisition and control modules, providing digital I/O functions. The modules can be remotely controlled through an RS-485 serial bus by using DCON and Modbus RTU protocols. The selectable transmission speed of the RS-485 port is up to 115, 200 bps. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the tM series perfect integration with the HMI, SCADA, PLC and other software systems.

Features :

• Cost-effective remote I/O modules
• Supports Modbus RTU and DCON protocols
• Isolated Digital Input and Output
• RS-485 bus supports baud rate up to 115200 bps
• Dual-watchdog with power-on and safe value
• Terminal block connector for easy wiring
• Tiny form-factor and low power consumption
• RoHs compliant with no Halogen
• Made from fire retardant materials (UL94-V0 Level)
• Easy DIN-Rail mounting

Based in Thane(India), we are in the business of supplying products that are reckoned for their quality and excellence. Interested buyers can purchase PCI Express from us in bulk and retail, as we are its reputed supplier.

Based in Thane(India), We marked our presence in the nationwide market since our products are qualitative and cost effective. With the assistance of our hardworking team, we are able to offer a wide range of quality Universal PCI.

I-7000 and M-7000 remote I/O modules provide cost-effective protection and conditioning for a wide range of valuable industrial control system. The product line includes sensor-tocomputer,   computer-to-sensor, digital I/O, timer/counter, RS-232 to RS-485 converter, USB to RS-485 converter, RS-485 repeater, RS-485 hub and RS-232/422/485 to Fiber Optics. I-7000 supports DCON protocol, and M-7000 modules support Modbus RTU and DCON protocols. Many SCADA/HMI software and PLCs support Modbus RTU protocol. It is easy for them to integrate with M-7000 modules.

Features :

• RS-485 Industrial Multi-Drop Network
• I/O type and Range Programmable
• Easy Mounting and Connection
• Rugged Industrial Environment
• Programmable Power-on Value and Safe Value
• DI Latch Function
• Low Speed Counter
• Overvoltage Protection
• Over-current Protection
• Virtual Channel to Channel Isolation
• Common Voltage Protection
• 3000 VDC Isolation
• Dual Communication Protocols
• Self-Tuner Inside
• Expandable Network

I-9K and I-97K series modules are provided for combining a variety of I/O functions within the WP-9000, XP-9000, LX-9000 and LP-9000 programmable automation controllers (PAC). The I-9K series is based on a parallel interface with high communication speed; while the I-97K series is based on a serial interface.