Our Products
Crane
1 Products availableMachines And Equipments
1 Products availablePrinting Machines & Equipment
1 Products availableWindmills
1 Products availableCement And Concrete
1 Products availableOur product range contains a wide range of transite mixer
Stationary Concrete Batching Plant The plant comprises of adequate capacity gravel & sand hoppers, weighing conveyor suspended on electronic load cells, Pan type mixer unit, additive tank. cement silo with screw conveyor, Rubber belt type charging conveyor, PLC based control panel.
Construction Features
MODEL | NE-30 SP | NE-45 SP | NE-60 SP |
---|---|---|---|
OUTPUT CAPACITY | 30M3/HR | 45M3/HR | 60M3/HR |
MIXER TYPE | PAN TYPE | PAN TYPE | PAN TYPE |
CAPACITY OF MIXER | 0.50M3 | 0.75M3 | 1M3 |
INPUT/OUTPUT CAPACITY | 750/500 | 1250/750 | 1500/1000 |
HOPPERS CAPACITY | 4/6M3 | 4/8M3 | 4/10M3 |
DISCHARGE HEIGHT | 4 MTRS. | 4 MTRS. | 4 MTRS. |
MIXER MOTOR | 30 HP | 40 HP | 40 HP |
COMPRESSOR MOTOR | 5 HP | 5 HP | 5 HP |
SCREW CONVEYOR MOTOR | 10 HP | 10 HP | 12.5 HP |
REQUIRED DG Set | 82.5 KVA | 125 KVA | 125 KVA |
Stationary Concrete Batching Plant special for wind mill is a fully automatic, compact Concrete Batching Plant with gravel & sand hoppers on single chassis with two nos. wheel axles & separate frame for Twin Shaft Mixer. The towing arrangement in the plant facilitates it to be towed by tractor or equivalent power.
The plant comprises of adequate capacity gravel & sand hoppers, weighing conveyor suspended on electronic load cells, Twin Shaft mixer unit, additive tank, cement silo with screw conveyor, Rubber belt type charging conveyor, PLC based control panel.
Construction Features
MODEL | NE-10 RD | NE-15 RD |
---|---|---|
OUT CAPACITY | 10M3/HR | 15M3/HR |
MIXER MOTOR | 10.0 HP X 1440 RPM | 15.0 HP X 1440 RPM |
CAPACITY-UNMIXED | 600 LTRS. | 800 LTRS. |
CAPACITY-MIXED | 400 LTRS. | 600 LTRS. |
DRUM DIAMETER | 1300 MM | 1500 MM |
DRUM LENGTH | 1530 MM | 1530 MM |
DRUM RPM | 16 RPM | 16 RPM |
PNEUMATIC WHEELS | 4 NOS. | 4 NOS. |
WATER PUMP | 1.O HP | 1.O HP |
We are leading manufacture and supplier of Cement silo or Fly Ass Silo from 40 Tones to 150 Tones that are in line with the highest quality standards prescribed by the industry. We are offering Storage Silos to our clients which are mainly a part of the concrete industry use at RMC Plant. Which are fabricates from superior quality of Mild Steel. This cement or fly ass silo is highly durable and at competitively priced. We can also manufacture that silo as per the specific requirements of our clients.
General Technical specification of the Silo Shell is as below :
SPECIFICATION TYPE | STORAGE CAP : 60 MT | STORAGE CAP : 100 MT | STORAGE CAP : 120 MT |
---|---|---|---|
MATERIAL | MS | MS | MS |
SHELL PLATE | 5MM AS PER IS 2062(SAIL/ESSAR) | 5MM AS PER IS 2062(SAIL/ESSAR) | 5MM AS PER IS 2062(SAIL/ESSAR) |
BOTTOM CONE PLATE | 6MM AS PER IS 2062(SAIL/ESSAR) | 6MM AS PER IS 2062(SAIL/ESSAR) | 6MM AS PER IS 2062(SAIL/ESSAR) |
LEG PIPE | DIA 8 IN ERW | DIA 8 IN ERW | DIA 8 IN ERW |
HEIGHT | 8.0 MTRS APPROX. | 12.8 MTRS APPROX. | 14.5 MTRS APPROX. |
DIA OF SILO | 3.4 MTRS. | 3.4 MTRS. | 3.4 MTRS. |
STORAGE CAP | 100 TON | 100 TON | 120 TON |
LADDER & RAILING | PROVIDE | PROVIDE | PROVIDE |
MANHOLE | PROVIDE | PROVIDE | PROVIDE |
FILTER CONNECTION | PROVIDE | PROVIDE | PROVIDE |